Drinking water in Schloß Holte-Stukenbrock
2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
OT Schloß Holte, Liemke, Sende, Stukenbrock
Stadtwerke Schloß Holte-Stukenbrock GmbHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 02/01/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,7 mg/l | 50 mg/l | 15 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Sulphate | 25,0 mg/l | 250 mg/l | 10 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Sodium | 8,2 mg/l | 200 mg/l | 4 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
Show all recorded parameters (19 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,7 mg/l | 50 mg/l | 15 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Calcite dissolution capacity | -3 mg/l | 5 mg/l CaCO3 | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Chloride | 11,9 mg/l | 250 mg/l | 5 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Conductivity (25 °C) | 3,19 μS/cm | 2,790 µS/cm | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| pH | 8,05 - | 6,5–9,5 | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Sodium | 8,2 mg/l | 200 mg/l | 4 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Sulphate | 25,0 mg/l | 250 mg/l | 10 % | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Total organic carbon (TOC) | 1,3 mg/l | ohne anormale Veränderung | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Turbidity | 0,12 NTU | 1 NTU | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,14 mmol/l | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Base capacity to pH 8.2 | 0,02 mmol/l | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Calcium | 50,1 mg/l | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Hardness range (WRMG) | weich - | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Magnesium | 1,4 mg/l | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Potassium | 0,9 mg/l | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
| Total hardness | 7,3 °dH | — | — | Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 33758
Show 1 more supply zone
OT Stukenbrock-Senne
Stadtwerke Schloß Holte-Stukenbrock GmbHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 02/01/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 9,8 mg/l | 50 mg/l | 20 % | Single value · OT Stukenbrock-Senne |
| Sulphate | 23,0 mg/l | 250 mg/l | 9 % | Single value · OT Stukenbrock-Senne |
| Sodium | 11,6 mg/l | 200 mg/l | 6 % | Single value · OT Stukenbrock-Senne |
Show all recorded parameters (19 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 9,8 mg/l | 50 mg/l | 20 % | Single value · OT Stukenbrock-Senne |
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,015 mg/l below limit of quantification | 0.2 mg/l | < 8 % * | Single value · OT Stukenbrock-Senne |
| Calcite dissolution capacity | 7,7 mg/l | 5 mg/l CaCO3 | — | Single value · OT Stukenbrock-Senne |
| Chloride | 19,6 mg/l | 250 mg/l | 8 % | Single value · OT Stukenbrock-Senne |
| Conductivity (25 °C) | 491 μS/cm | 2,790 µS/cm | — | Single value · OT Stukenbrock-Senne |
| Iron | <0,015 mg/l below limit of quantification | 0.2 mg/l | < 8 % * | Single value · OT Stukenbrock-Senne |
| Manganese | 0,006 mg/l | 50 µg/l | 12 % | Single value · OT Stukenbrock-Senne |
| pH | 7,24 - | 6,5–9,5 | — | Single value · OT Stukenbrock-Senne |
| Sodium | 11,6 mg/l | 200 mg/l | 6 % | Single value · OT Stukenbrock-Senne |
| Sulphate | 23,0 mg/l | 250 mg/l | 9 % | Single value · OT Stukenbrock-Senne |
| Total organic carbon (TOC) | 1,1 mg/l | ohne anormale Veränderung | — | Single value · OT Stukenbrock-Senne |
| Turbidity | 0,16 NTU | 1 NTU | — | Single value · OT Stukenbrock-Senne |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 3,89 mmol/l | — | — | Single value · OT Stukenbrock-Senne |
| Base capacity to pH 8.2 | 0,50 mmol/l | — | — | Single value · OT Stukenbrock-Senne |
| Calcium | 91,5 mg/l | — | — | Single value · OT Stukenbrock-Senne |
| Hardness range (WRMG) | mittel - | — | — | Single value · OT Stukenbrock-Senne |
| Magnesium | 1,8 mg/l | — | — | Single value · OT Stukenbrock-Senne |
| Potassium | 1,1 mg/l | — | — | Single value · OT Stukenbrock-Senne |
| Total hardness | 13,2 °dH | — | — | Single value · OT Stukenbrock-Senne |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 33758
Frequently asked questions about drinking water in Schloß Holte-Stukenbrock
- How hard is the water in Schloß Holte-Stukenbrock?
- Stadtwerke Schloß Holte-Stukenbrock GmbH publishes a total hardness of 7.3 °dH for the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Schloß Holte-Stukenbrock?
- Stadtwerke Schloß Holte-Stukenbrock GmbH publishes a nitrate value of 7,7 mg/l for the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- Who supplies the drinking water in Schloß Holte-Stukenbrock?
- Stadtwerke Schloß Holte-Stukenbrock GmbH. The values shown here come from the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.