Skip to content
maunawai.info

Drinking water in 33758

For this postcode Stadtwerke Schloß Holte-Stukenbrock GmbH publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

OT Schloß Holte, Liemke, Sende, Stukenbrock

Stadtwerke Schloß Holte-Stukenbrock GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 02/01/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
7.3 °dH
Hardness range weich
Key values OT Schloß Holte, Liemke, Sende, Stukenbrock
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Sulphate 25,0 mg/l 250 mg/l
10 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Sodium 8,2 mg/l 200 mg/l
4 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – OT Schloß Holte, Liemke, Sende, Stukenbrock
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock

Indicator parameters (11)

Indicator parameters – OT Schloß Holte, Liemke, Sende, Stukenbrock
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Calcite dissolution capacity -3 mg/l 5 mg/l CaCO3 Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Chloride 11,9 mg/l 250 mg/l
5 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Conductivity (25 °C) 3,19 μS/cm 2,790 µS/cm Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Iron <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
pH 8,05 - 6,5–9,5 Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Sodium 8,2 mg/l 200 mg/l
4 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Sulphate 25,0 mg/l 250 mg/l
10 %
Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Total organic carbon (TOC) 1,3 mg/l ohne anormale Veränderung Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Turbidity 0,12 NTU 1 NTU Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – OT Schloß Holte, Liemke, Sende, Stukenbrock
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,14 mmol/l Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Base capacity to pH 8.2 0,02 mmol/l Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Calcium 50,1 mg/l Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Hardness range (WRMG) weich - Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Magnesium 1,4 mg/l Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Potassium 0,9 mg/l Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock
Total hardness 7,3 °dH Single value · OT Schloß Holte, Liemke, Sende, Stukenbrock

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 1 more supply zone in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 02/01/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
13.2 °dH
Hardness range mittel
Key values OT Stukenbrock-Senne
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,8 mg/l 50 mg/l
20 %
Single value · OT Stukenbrock-Senne
Sulphate 23,0 mg/l 250 mg/l
9 %
Single value · OT Stukenbrock-Senne
Sodium 11,6 mg/l 200 mg/l
6 %
Single value · OT Stukenbrock-Senne
Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – OT Stukenbrock-Senne
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,8 mg/l 50 mg/l
20 %
Single value · OT Stukenbrock-Senne

Indicator parameters (11)

Indicator parameters – OT Stukenbrock-Senne
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,015 mg/l
below limit of quantification
0.2 mg/l
< 8 % *
Single value · OT Stukenbrock-Senne
Calcite dissolution capacity 7,7 mg/l 5 mg/l CaCO3 Single value · OT Stukenbrock-Senne
Chloride 19,6 mg/l 250 mg/l
8 %
Single value · OT Stukenbrock-Senne
Conductivity (25 °C) 491 μS/cm 2,790 µS/cm Single value · OT Stukenbrock-Senne
Iron <0,015 mg/l
below limit of quantification
0.2 mg/l
< 8 % *
Single value · OT Stukenbrock-Senne
Manganese 0,006 mg/l 50 µg/l
12 %
Single value · OT Stukenbrock-Senne
pH 7,24 - 6,5–9,5 Single value · OT Stukenbrock-Senne
Sodium 11,6 mg/l 200 mg/l
6 %
Single value · OT Stukenbrock-Senne
Sulphate 23,0 mg/l 250 mg/l
9 %
Single value · OT Stukenbrock-Senne
Total organic carbon (TOC) 1,1 mg/l ohne anormale Veränderung Single value · OT Stukenbrock-Senne
Turbidity 0,16 NTU 1 NTU Single value · OT Stukenbrock-Senne

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – OT Stukenbrock-Senne
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,89 mmol/l Single value · OT Stukenbrock-Senne
Base capacity to pH 8.2 0,50 mmol/l Single value · OT Stukenbrock-Senne
Calcium 91,5 mg/l Single value · OT Stukenbrock-Senne
Hardness range (WRMG) mittel - Single value · OT Stukenbrock-Senne
Magnesium 1,8 mg/l Single value · OT Stukenbrock-Senne
Potassium 1,1 mg/l Single value · OT Stukenbrock-Senne
Total hardness 13,2 °dH Single value · OT Stukenbrock-Senne

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 33758

How hard is the water in Postcode 33758?
Stadtwerke Schloß Holte-Stukenbrock GmbH publishes a total hardness of 7.3 °dH for the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 33758?
Stadtwerke Schloß Holte-Stukenbrock GmbH publishes a nitrate value of 7,7 mg/l for the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 33758?
Stadtwerke Schloß Holte-Stukenbrock GmbH. The values shown here come from the supply zone OT Schloß Holte, Liemke, Sende, Stukenbrock and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.