Drinking water in Scheinfeld
2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008
Stadtwerke ScheinfeldAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 14,0 mg/l | 50 mg/l | 28 % | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Sulphate | 220,0 mg/l | 250 mg/l | 88 % | Single value |
| Sodium | 12,8 mg/l | 200 mg/l | 6 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (42 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
Chemical parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,002 mg/l | 10 µg/l | 20 % | Single value |
| Benzene | < 0,00025 mg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Boron | 0,10 mg/l | 1 mg/l | 10 % | Single value |
| Bromate | < 0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | < 0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | < 0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | 0,004 mg/l | 2 mg/l | 0.2 % | Single value |
| Cyanide | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | < 0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | < 0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 14,0 mg/l | 50 mg/l | 28 % | Single value |
| Nitrite | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | 0,0023 mg/l | 10 µg/l | 23 % | Single value |
| Vinyl chloride | < 0,0005 mg/l below limit of quantification | 0.5 µg/l | < 100 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Single value |
| Chloride | 16,0 mg/l | 250 mg/l | 6 % | Single value |
| Coliform bacteria | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Conductivity (25 °C) | 972 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | < 0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,26 | 6,5–9,5 | — | Single value |
| Sodium | 12,8 mg/l | 200 mg/l | 6 % | Single value |
| Sulphate | 220,0 mg/l | 250 mg/l | 88 % | Single value |
| Taste | - not determined | für den Verbraucher annehmbar | — | Single value |
| Temperature | 11,3 °C | — | — | Single value |
| Turbidity | < 0,1 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 6,2 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,709 mmol/l | — | — | Single value |
| Calcium | 128,0 mg/l | — | — | Single value |
| Hardness range (WRMG) | 28,3 °dH | — | — | Single value |
| Magnesium | 44,9 mg/l | — | — | Single value |
| Oxygen | 6,6 mgO2/l | — | — | Single value |
| Potassium | 2,2 mg/l | — | — | Single value |
| Spectral absorption coefficient 254 nm (SAC 254) | - 1/m not determined | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 91443
Show 1 more supply zone
Scheinfeld / Karl-Lax-Straße 1, Bauhof
Stadtwerke ScheinfeldAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 15 mg/l | 50 mg/l | 30 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Sulphate | 150 mg/l | 250 mg/l | 60 % | Single value |
| Sodium | 21,2 mg/l | 200 mg/l | 11 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (42 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 Unit not stated in the document | 0/100 ml | — | Single value |
Chemical parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Benzene | <0,00025 mg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Boron | 0,07 mg/l | 1 mg/l | 7 % | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | <0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | 0,004 mg/l | 2 mg/l | 0.2 % | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | <0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | <0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 15 mg/l | 50 mg/l | 30 % | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | 0,0016 mg/l | 10 µg/l | 16 % | Single value |
| Vinyl chloride | <0,0005 mg/l below limit of quantification | 0.5 µg/l | < 100 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | 0,05 mg/l | 0.5 mg/l | 10 % | Single value |
| Chloride | 41 mg/l | 250 mg/l | 16 % | Single value |
| Coliform bacteria | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Conductivity (25 °C) | 923 Unit not stated in the document | 2,790 µS/cm | — | Single value |
| Iron | 0,005 mg/l | 0.2 mg/l | 3 % | Single value |
| Manganese | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,52 | 6,5–9,5 | — | Single value |
| Sodium | 21,2 mg/l | 200 mg/l | 11 % | Single value |
| Sulphate | 150 mg/l | 250 mg/l | 60 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 15,7°C | — | — | Single value |
| Turbidity | <0,1 below limit of quantification Unit not stated in the document | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,7 (mmol/l) | — | — | Single value |
| Base capacity to pH 8.2 | 0,343 (mmol/l) | — | — | Single value |
| Calcium | 119 mg/l | — | — | Single value |
| Hardness range (WRMG) | 25,4 (°dH) | — | — | Single value |
| Magnesium | 37,9 mg/l | — | — | Single value |
| Oxygen | 9,3 (mgO2/l) | — | — | Single value |
| Potassium | 2,6 mg/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 91443
Frequently asked questions about drinking water in Scheinfeld
- How hard is the water in Scheinfeld?
- Stadtwerke Scheinfeld publishes the hardness range 28,3 for the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Dezember 2025, retrieved on 08/07/2026.
- How much nitrate is in the drinking water in Scheinfeld?
- Stadtwerke Scheinfeld publishes a nitrate value of 14,0 mg/l for the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008. The statutory parametric value is 50 mg/l; the measured value represents 28 % of the parametric value. Basis: Dezember 2025, retrieved on 08/07/2026.
- Who supplies the drinking water in Scheinfeld?
- Stadtwerke Scheinfeld. The values shown here come from the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.