Drinking water in 91443
For this postcode Stadtwerke Scheinfeld publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008
Stadtwerke ScheinfeldAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 14,0 mg/l | 50 mg/l | 28 % | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Sulphate | 220,0 mg/l | 250 mg/l | 88 % | Single value |
| Sodium | 12,8 mg/l | 200 mg/l | 6 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (42 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
Chemical parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,002 mg/l | 10 µg/l | 20 % | Single value |
| Benzene | < 0,00025 mg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Boron | 0,10 mg/l | 1 mg/l | 10 % | Single value |
| Bromate | < 0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | < 0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | < 0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | 0,004 mg/l | 2 mg/l | 0.2 % | Single value |
| Cyanide | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | < 0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | < 0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 14,0 mg/l | 50 mg/l | 28 % | Single value |
| Nitrite | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | 0,0023 mg/l | 10 µg/l | 23 % | Single value |
| Vinyl chloride | < 0,0005 mg/l below limit of quantification | 0.5 µg/l | < 100 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Single value |
| Chloride | 16,0 mg/l | 250 mg/l | 6 % | Single value |
| Coliform bacteria | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Conductivity (25 °C) | 972 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | < 0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,26 | 6,5–9,5 | — | Single value |
| Sodium | 12,8 mg/l | 200 mg/l | 6 % | Single value |
| Sulphate | 220,0 mg/l | 250 mg/l | 88 % | Single value |
| Taste | - not determined | für den Verbraucher annehmbar | — | Single value |
| Temperature | 11,3 °C | — | — | Single value |
| Turbidity | < 0,1 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 6,2 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,709 mmol/l | — | — | Single value |
| Calcium | 128,0 mg/l | — | — | Single value |
| Hardness range (WRMG) | 28,3 °dH | — | — | Single value |
| Magnesium | 44,9 mg/l | — | — | Single value |
| Oxygen | 6,6 mgO2/l | — | — | Single value |
| Potassium | 2,2 mg/l | — | — | Single value |
| Spectral absorption coefficient 254 nm (SAC 254) | - 1/m not determined | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
Scheinfeld / Karl-Lax-Straße 1, Bauhof
Stadtwerke ScheinfeldAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 15 mg/l | 50 mg/l | 30 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Sulphate | 150 mg/l | 250 mg/l | 60 % | Single value |
| Sodium | 21,2 mg/l | 200 mg/l | 11 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (42 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 Unit not stated in the document | 0/100 ml | — | Single value |
Chemical parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Benzene | <0,00025 mg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Boron | 0,07 mg/l | 1 mg/l | 7 % | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | <0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | 0,004 mg/l | 2 mg/l | 0.2 % | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | <0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | <0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 15 mg/l | 50 mg/l | 30 % | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | 0,0016 mg/l | 10 µg/l | 16 % | Single value |
| Vinyl chloride | <0,0005 mg/l below limit of quantification | 0.5 µg/l | < 100 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | 0,05 mg/l | 0.5 mg/l | 10 % | Single value |
| Chloride | 41 mg/l | 250 mg/l | 16 % | Single value |
| Coliform bacteria | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Conductivity (25 °C) | 923 Unit not stated in the document | 2,790 µS/cm | — | Single value |
| Iron | 0,005 mg/l | 0.2 mg/l | 3 % | Single value |
| Manganese | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,52 | 6,5–9,5 | — | Single value |
| Sodium | 21,2 mg/l | 200 mg/l | 11 % | Single value |
| Sulphate | 150 mg/l | 250 mg/l | 60 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 15,7°C | — | — | Single value |
| Turbidity | <0,1 below limit of quantification Unit not stated in the document | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,7 (mmol/l) | — | — | Single value |
| Base capacity to pH 8.2 | 0,343 (mmol/l) | — | — | Single value |
| Calcium | 119 mg/l | — | — | Single value |
| Hardness range (WRMG) | 25,4 (°dH) | — | — | Single value |
| Magnesium | 37,9 mg/l | — | — | Single value |
| Oxygen | 9,3 (mgO2/l) | — | — | Single value |
| Potassium | 2,6 mg/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 91443
- How hard is the water in Postcode 91443?
- Stadtwerke Scheinfeld publishes the hardness range 28,3 for the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Dezember 2025, retrieved on 08/07/2026.
- How much nitrate is in the drinking water in Postcode 91443?
- Stadtwerke Scheinfeld publishes a nitrate value of 14,0 mg/l for the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008. The statutory parametric value is 50 mg/l; the measured value represents 28 % of the parametric value. Basis: Dezember 2025, retrieved on 08/07/2026.
- Who supplies the drinking water in Postcode 91443?
- Stadtwerke Scheinfeld. The values shown here come from the supply zone Scheinfeld / Hochbehälter 1 / OKZ 1230 6328 00008 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.