Skip to content
maunawai.info

Drinking water in Diemelstadt

8 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Ammen-/ Dehausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Ammen-/ Dehausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Ammen-/ Dehausen
Total hardness 8,28 °dH Single value · Ammen-/ Dehausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Show 7 more supply zones

Helmighausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.1 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Helmighausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Helmighausen
Total hardness 16,07 °dH Single value · Helmighausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Hesperinghausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.3 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Hesperinghausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Hesperinghausen
Total hardness 16,25 °dH Single value · Hesperinghausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
17.4 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Neudorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Neudorf
Total hardness 17,39 °dH Single value · Neudorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Orpethal

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
10.7 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Orpethal
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Orpethal
Total hardness 10,69 °dH Single value · Orpethal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Rhoden
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Rhoden
Total hardness 12,8 °dH Single value · Rhoden

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Wethen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Wethen
Total hardness 12,8 °dH Single value · Wethen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Wrexen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Wrexen
Total hardness 12,8 °dH Single value · Wrexen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 34474

Frequently asked questions about drinking water in Diemelstadt

How hard is the water in Diemelstadt?
Diemelstadt publishes a total hardness of 8.3 °dH for the supply zone Ammen-/ Dehausen (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 14/07/2026.
Who supplies the drinking water in Diemelstadt?
Diemelstadt. The values shown here come from the supply zone Ammen-/ Dehausen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.