Skip to content
maunawai.info

Drinking water in 34474

For this postcode Diemelstadt publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 7 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Ammen-/ Dehausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Ammen-/ Dehausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Ammen-/ Dehausen
Total hardness 8,28 °dH Single value · Ammen-/ Dehausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 7 more supply zones in this postcode

Helmighausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.1 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Helmighausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Helmighausen
Total hardness 16,07 °dH Single value · Helmighausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Hesperinghausen

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.3 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Hesperinghausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Hesperinghausen
Total hardness 16,25 °dH Single value · Hesperinghausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
17.4 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Neudorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · Neudorf
Total hardness 17,39 °dH Single value · Neudorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Orpethal

Diemelstadt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
10.7 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Orpethal
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Orpethal
Total hardness 10,69 °dH Single value · Orpethal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Rhoden
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Rhoden
Total hardness 12,8 °dH Single value · Rhoden

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Wethen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Wethen
Total hardness 12,8 °dH Single value · Wethen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12.8 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Wrexen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Wrexen
Total hardness 12,8 °dH Single value · Wrexen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 34474

How hard is the water in Postcode 34474?
Diemelstadt publishes a total hardness of 8.3 °dH for the supply zone Ammen-/ Dehausen (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 14/07/2026.
Who supplies the drinking water in Postcode 34474?
Diemelstadt. The values shown here come from the supply zone Ammen-/ Dehausen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.