Skip to content
maunawai.info

Italy · Comune

Drinking water in Valprato Soana

One supply zone, published by Società Metropolitana Acque Torino S.p.A. (SMAT). The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Water hardness
5 °dH
Key values Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,001 µg/l 0.1 µg/l
1 %
Mean · Comune di Valprato Soana
Nitrate < 5 mg/l
below limit of quantification
50 mg/l
< 10 % *
Mean · Comune di Valprato Soana
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Comune di Valprato Soana
Escherichia coli (E. coli) 0 numero/100 ml 0/100 ml Median · Comune di Valprato Soana
Sulphate < 10 mg/l
below limit of quantification
250 mg/l
< 4 % *
Mean · Comune di Valprato Soana
Sodium < 10 mg/l
below limit of quantification
200 mg/l
< 5 % *
Mean · Comune di Valprato Soana

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (48 — most recent value per parameter)

Microbiology (2)

Microbiology – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 numero/100 ml 0/100 ml Median · Comune di Valprato Soana
Intestinal enterococci 0 numero/100 ml 0/100 ml Median · Comune di Valprato Soana

Chemical parameters (24)

Chemical parameters – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,5 µg/l
below limit of quantification
3 µg/l
< 17 % *
Mean · Comune di Valprato Soana
Antimony 0,1 µg/l 10 µg/l
1 %
Mean · Comune di Valprato Soana
Arsenic 1 µg/l 10 µg/l
10 %
Mean · Comune di Valprato Soana
Benzene < 0,2 µg/l
below limit of quantification
1 µg/l
< 20 % *
Mean · Comune di Valprato Soana
Benzo(a)pyrene < 0,0025 µg/l
below limit of quantification
10 ng/l
< 25 % *
Mean · Comune di Valprato Soana
Boron < 0,02 mg/l
below limit of quantification
1.5 mg/l
< 1 % *
Mean · Comune di Valprato Soana
Bromate < 2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Mean · Comune di Valprato Soana
Cadmium < 0,1 µg/l
below limit of quantification
5 µg/l
< 2 % *
Mean · Comune di Valprato Soana
Chlorite < 0,07 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Mean · Comune di Valprato Soana
Chromium < 1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Mean · Comune di Valprato Soana
Copper < 0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Mean · Comune di Valprato Soana
Cyanide < 1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Mean · Comune di Valprato Soana
Fluoride 0,12 mg/l 1.5 mg/l
8 %
Mean · Comune di Valprato Soana
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Comune di Valprato Soana
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Mean · Comune di Valprato Soana
Nickel 2 µg/l 20 µg/l
10 %
Mean · Comune di Valprato Soana
Nitrate < 5 mg/l
below limit of quantification
50 mg/l
< 10 % *
Mean · Comune di Valprato Soana
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Mean · Comune di Valprato Soana
Pesticides — Total < 0,01 µg/l
below limit of quantification
0.5 µg/l
< 2 % *
Mean · Comune di Valprato Soana
Polycyclic aromatic hydrocarbons < 0,0063 µg/l
below limit of quantification
0.1 µg/l
< 6 % *
Mean · Comune di Valprato Soana
Selenium < 1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Mean · Comune di Valprato Soana
Tetrachloroethene and Trichloroethene (sum) < 0,5 µg/l
below limit of quantification
10 µg/l
< 5 % *
Mean · Comune di Valprato Soana
Trihalomethanes — Total < 0,5 µg/l
below limit of quantification
30 µg/l
< 2 % *
Mean · Comune di Valprato Soana
Vinyl chloride < 0,1 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Mean · Comune di Valprato Soana

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,001 µg/l 0.1 µg/l
1 %
Mean · Comune di Valprato Soana

Indicator parameters (14)

Indicator parameters – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 5 µg/l
below limit of quantification
0.2 mg/l
< 3 % *
Mean · Comune di Valprato Soana
Ammonium < 0,04 mg/l
below limit of quantification
0.5 mg/l
< 8 % *
Mean · Comune di Valprato Soana
Chloride < 5 mg/l
below limit of quantification
250 mg/l
< 2 % *
Mean · Comune di Valprato Soana
Clostridium perfringens (including spores) 0 numero/100 ml 0/100 ml Median · Comune di Valprato Soana
Coliform bacteria 0 numero/100 ml 0/100 ml Median · Comune di Valprato Soana
Colony count 22 °C 0 numero/ml senza variazioni anomale Median · Comune di Valprato Soana
Conductivity (25 °C) 146 µS/cm 2,500 µS/cm Mean · Comune di Valprato Soana
Iron < 5 µg/l
below limit of quantification
0.2 mg/l
< 3 % *
Mean · Comune di Valprato Soana
Manganese < 1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Mean · Comune di Valprato Soana
pH 8,1 pH 6,5–9,5 Mean · Comune di Valprato Soana
Sodium < 10 mg/l
below limit of quantification
200 mg/l
< 5 % *
Mean · Comune di Valprato Soana
Sulphate < 10 mg/l
below limit of quantification
250 mg/l
< 4 % *
Mean · Comune di Valprato Soana
Total organic carbon (TOC) 500 µg/l senza variazioni anomale Mean · Comune di Valprato Soana
Turbidity 0,3 NTU accettabile per i consumatori, senza variazioni anomale Mean · Comune di Valprato Soana

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,05 mg/l Mean · Comune di Valprato Soana

Further parameters (6)

Further parameters – Comune di Valprato Soana
Parameter Value Parametric value Share of the parametric value Reference
Calcium 29,7 mg/l Mean · Comune di Valprato Soana
Dry residue 131 mg/l Mean · Comune di Valprato Soana
Magnesium 2,3 mg/l Mean · Comune di Valprato Soana
Potassium < 1 mg/l
below limit of quantification
Mean · Comune di Valprato Soana
Total hardness 9 °F Mean · Comune di Valprato Soana
Vanadium < 1 µg/l
below limit of quantification
0.14 mg/l
< 0.7 % *
Mean · Comune di Valprato Soana

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.smatorino.it/monitoraggio-acque/?comune=VALPRATO SOANA · 2025 · 2025 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).