Skip to content
maunawai.info

Italy · Comune

Drinking water in Ternate

One supply zone, published by ALFA S.r.l.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Comune di Ternate

ALFA S.r.l.
Key values Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10 mg/l 50 mg/l
20 %
Median · Comune di Ternate · Source [1]
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Escherichia coli (E. coli) 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Ternate · Source [1]
Sulphate 18 mg/l 250 mg/l
7 %
Median · Comune di Ternate · Source [1]
Sodium 7 mg/l 200 mg/l
3 %
Median · Comune di Ternate · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (54 — most recent value per parameter)

Microbiology (2)

Microbiology – Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Ternate · Source [1]
Intestinal enterococci 1 UFC/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Comune di Ternate · Source [1]

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (31)

Chemical parameters – Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,9 µg/l
below limit of quantification
3 µg/l
< 30 % *
Maximum · Comune di Ternate · Source [1]
Alachlor < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Antimony < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Arsenic 6 µg/l 10 µg/l
60 %
Median · Comune di Ternate · Source [1]
Atrazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Bentazone < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Benzene < 0,3 µg/l
below limit of quantification
1 µg/l
< 30 % *
Maximum · Comune di Ternate · Source [1]
Boron < 0,3 mg/l
below limit of quantification
1.5 mg/l
< 20 % *
Maximum · Comune di Ternate · Source [1]
Bromodichloromethane < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Cadmium < 1,0 µg/l
below limit of quantification
5 µg/l
< 20 % *
Maximum · Comune di Ternate · Source [1]
Chlorate < 0,05 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Maximum · Comune di Ternate · Source [2]
Chlorite < 0,05 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Maximum · Comune di Ternate · Source [2]
Chromium < 5 µg/l
below limit of quantification
50 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Copper < 0,2 mg/l
below limit of quantification
2 mg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Dibromochloromethane < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Fluoride 0,1 mg/l 1.5 mg/l
7 %
Maximum · Comune di Ternate · Source [1]
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Molinate < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Nickel 1 µg/l 20 µg/l
5 %
Maximum · Comune di Ternate · Source [1]
Nitrate 10 mg/l 50 mg/l
20 %
Median · Comune di Ternate · Source [1]
Nitrite < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Propazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Selenium < 1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Maximum · Comune di Ternate · Source [1]
Simazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Terbuthylazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Tetrachloroethene < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Tetrachloroethene and Trichloroethene (sum) < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [3]
Tribromomethane (bromoform) < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Trichloroethene < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Trichloromethane (chloroform) < 1 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Trihalomethanes — Total < 1 µg/l
below limit of quantification
30 µg/l
< 3 % *
Maximum · Comune di Ternate · Source [3]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
HFPO-DA (GenX) < 0,010 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Perfluorodecane sulfonic acid (PFDS) < 0,010 µg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]

Indicator parameters (11)

Indicator parameters – Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 20 µg/l
below limit of quantification
0.2 mg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Ammonium < 0,10 mg/l
below limit of quantification
0.5 mg/l
< 20 % *
Maximum · Comune di Ternate · Source [1]
Chloride 9 mg/l 250 mg/l
4 %
Median · Comune di Ternate · Source [1]
Coliform bacteria 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Ternate · Source [1]
Colony count 22 °C 0 UFC/1ml senza variazioni anomale Median · Comune di Ternate · Source [1]
Iron < 20 µg/l
below limit of quantification
0.2 mg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
Manganese < 5 µg/l
below limit of quantification
50 µg/l
< 10 % *
Maximum · Comune di Ternate · Source [1]
pH 7,4 pH_unit 6,5–9,5 Median · Comune di Ternate · Source [1]
Sodium 7 mg/l 200 mg/l
3 %
Median · Comune di Ternate · Source [1]
Sulphate 18 mg/l 250 mg/l
7 %
Median · Comune di Ternate · Source [1]
Turbidity 0,25 NTU accettabile per i consumatori, senza variazioni anomale Median · Comune di Ternate · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Comune di Ternate
Parameter Value Parametric value Share of the parametric value Reference
Barium < 2 mg/l
below limit of quantification
Maximum · Comune di Ternate · Source [1]
Calcium 56 mg/l Median · Comune di Ternate · Source [1]
Dry residue 263 mg/l Median · Comune di Ternate · Source [1]
Magnesium 15 mg/l Median · Comune di Ternate · Source [1]
Potassium 2 mg/l Median · Comune di Ternate · Source [1]
Total hardness 20 ° f Median · Comune di Ternate · Source [1]
Vanadium < 10 µg/l
below limit of quantification
0.14 mg/l
< 7 % *
Maximum · Comune di Ternate · Source [1]
Zinc 16 µg/l Median · Comune di Ternate · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Sources: [1] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/Dati%20I%20e%20II%20Trimestre%202025_RETE.xlsx · I Semestre 2025_RETE_Alfa · Campionamenti dal 08.01.2025 al 06.05.2025 · retrieved on 08/07/2026 [2] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/III%20Trimestre.xlsx · III Trimestre 2025_RETE_Alfa · Campionamenti dal 24.07.2025 al 02.09.2025 · retrieved on 08/07/2026 [3] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/IV%20Trimestre.xlsx · IV Trimestre 2025_RETE_Alfa · Campionamenti dal 05.11.2025 al 21.11.2025 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).