Skip to content
maunawai.info

Italy · Comune

Drinking water in Spinea

One supply zone, published by VERITAS S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Water hardness
16.2 °dH
Key values Spinea
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,0015 µg/l
below limit of quantification
0.1 µg/l
< 2 % *
Mean
Nitrate 18,62 mg/l 50 mg/l
37 %
Mean
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) Non rilevato UFC/100ml
not detectable
0/100 ml Mean
Sulphate 20,25 mg/l 250 mg/l
8 %
Mean
Sodium 4,67 mg/l 200 mg/l
2 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (98 — most recent value per parameter)

Microbiology (2)

Microbiology – Spinea
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Non rilevato UFC/100ml
not detectable
0/100 ml Mean
Intestinal enterococci Non rilevato UFC/100ml
not detectable
0/100 ml Mean

Chemical parameters (66)

Chemical parameters – Spinea
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
2,6-Dichlorobenzamide (BAM) <0,01 µg/l
below limit of quantification
Mean
Aclonifen <0,01 µg/l
below limit of quantification
Mean
Acrylamide <0,03 µg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Aldrin <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Mean
AMPA <0,02 µg/l
below limit of quantification
Mean
Antimony <0,2 µg/l
below limit of quantification
10 µg/l
< 2 % *
Mean
Arsenic <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Atrazine <0,01 µg/l
below limit of quantification
Mean
Azoxystrobin <0,01 µg/l
below limit of quantification
Mean
Bentazone <0,01 µg/l
below limit of quantification
Mean
Benzene <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Benzo(a)pyrene <0,0025 µg/l
below limit of quantification
10 ng/l
< 25 % *
Mean
Bisphenol A <0,25 µg/l
below limit of quantification
2.5 µg/l
< 10 % *
Mean
Boron 0,01 mg/l 1.5 mg/l
0.7 %
Mean
Boscalid <0,025 µg/l
below limit of quantification
Mean
Bromate <3 µg/l
below limit of quantification
10 µg/l
< 30 % *
Mean
Cadmium <0,1 µg/l
below limit of quantification
5 µg/l
< 2 % *
Mean
Chlorate <0,1 µg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Mean
Chlorite <0,1 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Mean
Chromium 1,17 µg/l 25 µg/l
5 %
Mean
Clomazone <0,01 µg/l
below limit of quantification
Mean
Copper <0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Mean
Cyanide <10 µg/l
below limit of quantification
50 µg/l
< 20 % *
Mean
Dieldrin <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Mean
Diuron <0,01 µg/l
below limit of quantification
Mean
Epichlorohydrin <0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Mean
Fludioxonil <0,01 µg/l
below limit of quantification
Mean
Flufenacet <0,01 µg/l
below limit of quantification
Mean
Fluopicolide <0,01 µg/l
below limit of quantification
Mean
Fluoride 0,07 mg/l 1.5 mg/l
5 %
Mean
Glyphosate <0,02 µg/l
below limit of quantification
Mean
Haloacetic acids (HAA) <3 µg/l
below limit of quantification
60 µg/l
< 5 % *
Mean
Heptachlor <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Mean
Heptachlor epoxide <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Mean
Imidacloprid <0,01 µg/l
below limit of quantification
Mean
Isoproturon <0,01 µg/l
below limit of quantification
Mean
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Lenacil <0,01 µg/l
below limit of quantification
Mean
Linuron <0,01 µg/l
below limit of quantification
Mean
MCPA <0,010 µg/l
below limit of quantification
Mean
Mecoprop <0,010 µg/l
below limit of quantification
Mean
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Metamitron <0,01 µg/l
below limit of quantification
Mean
Metolachlor <0,01 µg/l
below limit of quantification
Mean
Metribuzin <0,01 µg/l
below limit of quantification
Mean
Microcystin-LR <0,01 µg/l
below limit of quantification
1 µg/l
< 1 % *
Mean
Molinate <0,01 µg/l
below limit of quantification
Mean
Nickel <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Mean
Nicosulfuron <0,025 µg/l
below limit of quantification
Mean
Nitrate 18,62 mg/l 50 mg/l
37 %
Mean
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Pesticides — Total 0,05 µg/l 0.5 µg/l
10 %
Mean
Polycyclic aromatic hydrocarbons <0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean
Propamocarb <0,01 µg/l
below limit of quantification
Mean
Pyrimethanil <0,01 µg/l
below limit of quantification
Mean
Quinoxyfen <0,01 µg/l
below limit of quantification
Mean
Rimsulfuron <0,025 µg/l
below limit of quantification
Mean
Selenium <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Mean
Tebufenozide <0,01 µg/l
below limit of quantification
Mean
Tetrachloroethene and Trichloroethene (sum) 1,11 µg/l 10 µg/l
11 %
Mean
Tetraconazole <0,01 µg/l
below limit of quantification
Mean
Trifluralin <0,01 µg/l
below limit of quantification
Mean
Trihalomethanes — Total 0,45 µg/l 30 µg/l
2 %
Mean
Uranium <30 µg/l
below limit of quantification
30 µg/l
< 100 % *
Mean
Vinyl chloride <0,1 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (3)

PFAS – Spinea
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,0015 µg/l
below limit of quantification
20 ng/l
< 8 % *
Mean
Sum of PFAS <0,0015 µg/l
below limit of quantification
0.1 µg/l
< 2 % *
Mean
Trifluoroacetic acid (TFA) 0,28 µg/l 10 µg/l
3 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (18)

Indicator parameters – Spinea
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 3,40 µg/l 0.2 mg/l
2 %
Mean
Ammonium <0,05 mg/l NH4
below limit of quantification
0.5 mg/l
< 10 % *
Mean
Chloride 6,41 mg/l 250 mg/l
3 %
Mean
Clostridium perfringens (including spores) Non rilevato UFC/100ml
not detectable
0/100 ml Mean
Coliform bacteria Non rilevato UFC/100ml
not detectable
0/100 ml Mean
Colony count 22 °C Non rilevato UFC/ml
not detectable
senza variazioni anomale Mean
Colour <5 unità Pt/Co
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Mean
Conductivity (25 °C) 490 µs/cm a 20°C 2,500 µS/cm Mean
Iron <5 µg/l
below limit of quantification
0.2 mg/l
< 3 % *
Mean
Manganese <1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Mean
Odour Assente -
not detectable
accettabile per i consumatori, senza variazioni anomale Mean
pH 7,40 unità pH 6,5–9,5 Mean
Sodium 4,67 mg/l 200 mg/l
2 %
Mean
Sulphate 20,25 mg/l 250 mg/l
8 %
Mean
Taste Assente -
not detectable
accettabile per i consumatori, senza variazioni anomale Mean
Temperature 12,6 °C Mean
Total organic carbon (TOC) <0,3 mg/l
below limit of quantification
senza variazioni anomale Mean
Turbidity 0,11 NTU accettabile per i consumatori, senza variazioni anomale Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Spinea
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,18 mg/l Mean

Further parameters (8)

Further parameters – Spinea
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 267 mg/l CaCO3 Mean
Calcium 67,97 mg/l Mean
Dry residue 306 mg/l Mean
Hydrogen carbonate 325 mg/l HCO3 Mean
Magnesium 28,50 mg/l Mean
Potassium 1,13 mg/l Mean
Total hardness 29 °F Mean
Vanadium <1 µg/l
below limit of quantification
0.14 mg/l
< 0.7 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).