Skip to content
maunawai.info

Italy · Comune

Drinking water in Serrara Fontana

One supply zone, published by it-evi-spa. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Serrara Fontana - Via Andrea Mattera (fontana belvedere)

it-evi-spa
Water hardness
23.5 °dH
Key values Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 50 mg/l
8 %
Single value
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value
Intestinal enterococci 0 UFC/100 ml 0/100 ml Single value

Chemical parameters (2)

Chemical parameters – Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 50 mg/l
8 %
Single value
Nitrite <0.05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0.05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Coliform bacteria 0 MPN/100 ml 0/100 ml Single value
Colony count 22 °C 0 UFC/ml senza variazioni anomale Single value
Colour <10 Hazen
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value
Conductivity (25 °C) 718 microS/cm 2,500 µS/cm Single value
Odour nessun odore rivelabile accettabile per i consumatori, senza variazioni anomale Single value
pH 7.7 pH 6,5–9,5 Single value
Taste accettabile accettabile per i consumatori, senza variazioni anomale Single value
Turbidity <0.5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Total chlorine 0.08 mg/l Single value

Further parameters (3)

Further parameters – Serrara Fontana - Via Andrea Mattera (fontana belvedere)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 120 mg/l Single value
Magnesium 29 mg/l Single value
Total hardness 42 °F Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.evi-spa.it/pdf_qualita/Novembre2025/Qualita Acqua Serrara.pdf · 18/11/2025 · 10/11/2025 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).