Italy · Comune

Drinking water in Scaldasole

One supply zone, published by Pavia Acque. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Scaldasole

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 22/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness

5.6 °dH

Key values Scaldasole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	<1,5 mg/L NO3 below limit of quantification	50 mg/l	< 3 % *	Single value · Scaldasole
Lead	<1 µg/L Pb below limit of quantification	10 µg/l	< 10 % *	Single value · Scaldasole
Sulphate	10 mg/L SO4	250 mg/l	4 %	Single value · Scaldasole
Sodium	6 mg/L Na	200 mg/l	3 %	Single value · Scaldasole

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (51 — most recent value per parameter)

Chemical parameters (33)

Chemical parameters – Scaldasole
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	<0,1 µg/L below limit of quantification	3 µg/l	< 3 % *	Single value · Scaldasole
2,6-Dichlorobenzamide (BAM)	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Antimony	<1 µg/L Sb below limit of quantification	10 µg/l	< 10 % *	Single value · Scaldasole
Arsenic	<1 µg/L As below limit of quantification	10 µg/l	< 10 % *	Single value · Scaldasole
Atrazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Bentazone	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Benzene	<0,1 µg/L below limit of quantification	1 µg/l	< 10 % *	Single value · Scaldasole
Bromodichloromethane	<0,1 µg/L below limit of quantification	—	—	Single value · Scaldasole
Cadmium	<0,5 µg/L Cd below limit of quantification	5 µg/l	< 10 % *	Single value · Scaldasole
Chromium	<1 µg/L Cr below limit of quantification	50 µg/l	< 2 % *	Single value · Scaldasole
Copper	<0,1 mg/L Cu below limit of quantification	2 mg/l	< 5 % *	Single value · Scaldasole
Desethylatrazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Desethylterbuthylazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Dibromochloromethane	<0,1 µg/L below limit of quantification	—	—	Single value · Scaldasole
Fluoride	<0,1 mg/L F below limit of quantification	1.5 mg/l	< 7 % *	Single value · Scaldasole
Lead	<1 µg/L Pb below limit of quantification	10 µg/l	< 10 % *	Single value · Scaldasole
Metolachlor	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Molinate	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Nickel	<1 µg/L Ni below limit of quantification	20 µg/l	< 5 % *	Single value · Scaldasole
Nitrate	<1,5 mg/L NO3 below limit of quantification	50 mg/l	< 3 % *	Single value · Scaldasole
Nitrite	<0,05 mg/L NO2 below limit of quantification	0.5 mg/l	< 10 % *	Single value · Scaldasole
Pesticides — Total	<0,02 µg/L below limit of quantification	0.5 µg/l	< 4 % *	Single value · Scaldasole
Propazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Simazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Terbuthylazine	<0,02 µg/L below limit of quantification	—	—	Single value · Scaldasole
Tetrachloroethene	0,1 µg/L	—	—	Single value · Scaldasole
Tetrachloroethene and Trichloroethene (sum)	<1 µg/L below limit of quantification	10 µg/l	< 10 % *	Single value · Scaldasole
Tribromomethane (bromoform)	<0,1 µg/L below limit of quantification	—	—	Single value · Scaldasole
Trichloroethene	<0,1 µg/L below limit of quantification	—	—	Single value · Scaldasole
Trichloromethane (chloroform)	<0,1 µg/L below limit of quantification	—	—	Single value · Scaldasole
Trihalomethanes — Total	<1 µg/L below limit of quantification	30 µg/l	< 3 % *	Single value · Scaldasole
Uranium	<1 µg/L U below limit of quantification	30 µg/l	< 3 % *	Single value · Scaldasole
Vinyl chloride	<0,1 µg/L below limit of quantification	0.5 µg/l	< 20 % *	Single value · Scaldasole

Indicator parameters (9)

Indicator parameters – Scaldasole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Ammonium	<0,1 mg/L NH4 below limit of quantification	0.5 mg/l	< 20 % *	Single value · Scaldasole
Chloride	2 mg/L Cl	250 mg/l	0.8 %	Single value · Scaldasole
Conductivity (25 °C)	197 µS/cm	2,500 µS/cm	—	Single value · Scaldasole
Iron	8 µg/L Fe	0.2 mg/l	4 %	Single value · Scaldasole
Manganese	<5 µg/L Mn below limit of quantification	50 µg/l	< 10 % *	Single value · Scaldasole
pH	7,9 unità pH	6,5–9,5	—	Single value · Scaldasole
Sodium	6 mg/L Na	200 mg/l	3 %	Single value · Scaldasole
Sulphate	10 mg/L SO4	250 mg/l	4 %	Single value · Scaldasole
Total organic carbon (TOC)	0,37 mg/L C	senza variazioni anomale	—	Single value · Scaldasole

Further parameters (9)

Further parameters – Scaldasole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Bromide	<0,05 mg/L Br below limit of quantification	—	—	Single value · Scaldasole
Calcium	29 mg/L Ca	—	—	Single value · Scaldasole
Dry residue	122 mg/L	—	—	Single value · Scaldasole
Magnesium	5,8 mg/L Mg	—	—	Single value · Scaldasole
Phosphate	0,19 mg/L P2O5	—	—	Single value · Scaldasole
Potassium	1,1 mg/L K	—	—	Single value · Scaldasole
Total hardness	10 °F	—	—	Single value · Scaldasole
Vanadium	<1 µg/L V below limit of quantification	0.14 mg/l	< 0.7 % *	Single value · Scaldasole
Zinc	38 µg/L Zn	—	—	Single value · Scaldasole

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.08_CBL_Lomello.pdf · 22/04/2024 · Campionamento 08/04/2024, Analisi 09/04/2024-22/04/2024 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).