Skip to content
maunawai.info

Italy · Comune

Drinking water in Santo Stefano Ticino

One supply zone, published by Gruppo CAP (CAP Holding S.p.A.). The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Comune di Santo Stefano Ticino

Gruppo CAP (CAP Holding S.p.A.)
Key values Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Maximum · Comune di Santo Stefano Ticino · Source [1]
Nitrate 30 mg/l 50 mg/l
60 %
Median · Comune di Santo Stefano Ticino · Source [2]
Lead < 2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Sulphate 24 mg/l 250 mg/l
10 %
Median · Comune di Santo Stefano Ticino · Source [2]
Sodium 5 mg/l 200 mg/l
3 %
Median · Comune di Santo Stefano Ticino · Source [2]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (49 — most recent value per parameter)

Microbiology (1)

Microbiology – Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Santo Stefano Ticino · Source [2]

Chemical parameters (30)

Chemical parameters – Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,9 µg/l
below limit of quantification
3 µg/l
< 30 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Alachlor < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Antimony < 1,0 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Arsenic 1 µg/l 10 µg/l
10 %
Median · Comune di Santo Stefano Ticino · Source [2]
Atrazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Bentazone < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Benzene < 0,3 µg/l
below limit of quantification
1 µg/l
< 30 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Boscalid < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Bromodichloromethane < 0,9 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [2]
Chlorate 0,18 mg/l 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median · Comune di Santo Stefano Ticino · Source [2]
Chlorite < 0,02 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Maximum · Comune di Santo Stefano Ticino · Source [2]
Chromium 7 µg/l 25 µg/l
28 %
Median · Comune di Santo Stefano Ticino · Source [2]
Copper < 5 µg/l
below limit of quantification
2 mg/l
< 0.3 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Fluoride < 0,20 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Imidacloprid < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Lead < 2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Mercury < 0,3 µg/l
below limit of quantification
1 µg/l
< 30 % *
Maximum · Comune di Santo Stefano Ticino · Source [1]
Molinate < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Nitrate 30 mg/l 50 mg/l
60 %
Median · Comune di Santo Stefano Ticino · Source [2]
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Propazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Selenium < 1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Simazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Terbuthylazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Tetrachloroethene 1 µg/l Maximum · Comune di Santo Stefano Ticino · Source [2]
Tetrachloroethene and Trichloroethene (sum) 2 µg/l 10 µg/l
20 %
Median · Comune di Santo Stefano Ticino · Source [2]
Trichloroethene 1,1 µg/l Median · Comune di Santo Stefano Ticino · Source [2]
Trichloromethane (chloroform) < 0,9 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [2]
Trihalomethanes — Total < 1 µg/l
below limit of quantification
30 µg/l
< 3 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Uranium 7 µg/l 30 µg/l
23 %
Median · Comune di Santo Stefano Ticino · Source [2]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (3)

PFAS – Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
HFPO-DA (GenX) < 0,0010 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Perfluorodecane sulfonic acid (PFDS) < 0,0010 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [1]
Sum of PFAS < 0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Maximum · Comune di Santo Stefano Ticino · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 20 µg/l
below limit of quantification
0.2 mg/l
< 10 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Ammonium < 0,10 mg/l
below limit of quantification
0.5 mg/l
< 20 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Chloride 12 mg/l 250 mg/l
5 %
Median · Comune di Santo Stefano Ticino · Source [2]
Colony count 22 °C 1 UFC/100ml senza variazioni anomale Median · Comune di Santo Stefano Ticino · Source [2]
pH 7,7 unita pH 6,5–9,5 Median · Comune di Santo Stefano Ticino · Source [2]
Sodium 5 mg/l 200 mg/l
3 %
Median · Comune di Santo Stefano Ticino · Source [2]
Sulphate 24 mg/l 250 mg/l
10 %
Median · Comune di Santo Stefano Ticino · Source [2]
Turbidity < 0,100 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Maximum · Comune di Santo Stefano Ticino · Source [2]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – Comune di Santo Stefano Ticino
Parameter Value Parametric value Share of the parametric value Reference
Barium < 0,1 µg/l
below limit of quantification
Maximum · Comune di Santo Stefano Ticino · Source [2]
Calcium 75 mg/l Median · Comune di Santo Stefano Ticino · Source [2]
Dry residue 349 mg/l Median · Comune di Santo Stefano Ticino · Source [2]
Hydrogen carbonate 293 mg/l Median · Comune di Santo Stefano Ticino · Source [1]
Potassium 1,3 mg/l Median · Comune di Santo Stefano Ticino · Source [2]
Vanadium < 5 µg/l
below limit of quantification
0.14 mg/l
< 4 % *
Maximum · Comune di Santo Stefano Ticino · Source [2]
Zinc 21 µg/l Maximum · Comune di Santo Stefano Ticino · Source [2]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).