Skip to content
maunawai.info

Italy · Comune

Drinking water in San Paolo di Civitate

One supply zone, published by Acquedotto Pugliese S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

San Paolo Civitate (FG)

Acquedotto Pugliese S.p.A.
Key values San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5 mg/l NO₃ 50 mg/l
10 %
Single value · San Paolo Civitate (FG)
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Escherichia coli (E. coli) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · San Paolo Civitate (FG)
Sulphate 97 mg/l SO₄ 250 mg/l
39 %
Single value · San Paolo Civitate (FG)
Sodium 61 mg/l Na 200 mg/l
31 %
Single value · San Paolo Civitate (FG)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (53 — most recent value per parameter)

Microbiology (2)

Microbiology – San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · San Paolo Civitate (FG)
Intestinal enterococci <1 numero/100 ml
below limit of quantification
0/100 ml Single value · San Paolo Civitate (FG)

Chemical parameters (26)

Chemical parameters – San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,4 µg/l
below limit of quantification
3 µg/l
< 13 % *
Single value · San Paolo Civitate (FG)
Antimony <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Arsenic <1 µg/l As
below limit of quantification
10 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Benzene <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Benzo(a)pyrene <0,003 µg/l
below limit of quantification
10 ng/l
< 30 % *
Single value · San Paolo Civitate (FG)
Boron 0,2 mg/l 1.5 mg/l
13 %
Single value · San Paolo Civitate (FG)
Bromate <2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Cadmium <1,0 µg/l
below limit of quantification
5 µg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Chlorate 0,37 mg/l 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value · San Paolo Civitate (FG)
Chlorite 0,36 mg/l 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value · San Paolo Civitate (FG)
Chromium <1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Single value · San Paolo Civitate (FG)
Copper <0,1 mg/l
below limit of quantification
2 mg/l
< 5 % *
Single value · San Paolo Civitate (FG)
Cyanide <10 µg/l
below limit of quantification
50 µg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Epichlorohydrin <0,02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Fluoride 0,5 mg/l F 1.5 mg/l
33 %
Single value · San Paolo Civitate (FG)
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Nickel 1 µg/l 20 µg/l
5 %
Single value · San Paolo Civitate (FG)
Nitrate 5 mg/l NO₃ 50 mg/l
10 %
Single value · San Paolo Civitate (FG)
Nitrite <0,10 mg/l NO₂
below limit of quantification
0.5 mg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Pesticides — Total <0,01 µg/l
below limit of quantification
0.5 µg/l
< 2 % *
Single value · San Paolo Civitate (FG)
Polycyclic aromatic hydrocarbons <0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Selenium <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value · San Paolo Civitate (FG)
Tetrachloroethene and Trichloroethene (sum) <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · San Paolo Civitate (FG)
Trihalomethanes — Total 5 µg/l 30 µg/l
17 %
Single value · San Paolo Civitate (FG)
Vinyl chloride <0,10 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value · San Paolo Civitate (FG)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (17)

Indicator parameters – San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 116 µg/l 0.2 mg/l
58 %
Single value · San Paolo Civitate (FG)
Ammonium <0,10 mg/l NH₄
below limit of quantification
0.5 mg/l
< 20 % *
Single value · San Paolo Civitate (FG)
Chloride 45 mg/l Cl 250 mg/l
18 %
Single value · San Paolo Civitate (FG)
Clostridium perfringens (including spores) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · San Paolo Civitate (FG)
Coliform bacteria <1 numero/100 ml
below limit of quantification
0/100 ml Single value · San Paolo Civitate (FG)
Colony count 22 °C 103 numero/100 ml senza variazioni anomale Single value · San Paolo Civitate (FG)
Colour s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · San Paolo Civitate (FG)
Conductivity (25 °C) 595 µS/cm-1 a 20°C 2,500 µS/cm Single value · San Paolo Civitate (FG)
Iron 42 µg/l 0.2 mg/l
21 %
Single value · San Paolo Civitate (FG)
Manganese <10 µg/l Mn
below limit of quantification
50 µg/l Single value · San Paolo Civitate (FG)
Odour s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · San Paolo Civitate (FG)
pH 8 Unità di pH 6,5–9,5 Single value · San Paolo Civitate (FG)
Sodium 61 mg/l Na 200 mg/l
31 %
Single value · San Paolo Civitate (FG)
Sulphate 97 mg/l SO₄ 250 mg/l
39 %
Single value · San Paolo Civitate (FG)
Taste s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · San Paolo Civitate (FG)
Total organic carbon (TOC) 2,43 mg/l senza variazioni anomale Single value · San Paolo Civitate (FG)
Turbidity 0,5 NTU accettabile per i consumatori, senza variazioni anomale Single value · San Paolo Civitate (FG)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
Total chlorine <0,1 mg/l Cl₂
below limit of quantification
Single value · San Paolo Civitate (FG)

Further parameters (7)

Further parameters – San Paolo Civitate (FG)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 46 mg/l Ca Single value · San Paolo Civitate (FG)
Dry residue 416 mg/l Single value · San Paolo Civitate (FG)
Hydrogen carbonate 222 mg/l HCO₃ Single value · San Paolo Civitate (FG)
Magnesium 17 mg/l Mg Single value · San Paolo Civitate (FG)
Potassium 7 mg/l K Single value · San Paolo Civitate (FG)
Total hardness 18 G.F. Single value · San Paolo Civitate (FG)
Vanadium <10 µg/l
below limit of quantification
0.14 mg/l
< 7 % *
Single value · San Paolo Civitate (FG)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aqp.it/scopri-acquedotto/qualita-acqua · Luglio - Dicembre 2025 · Luglio - Dicembre 2025 · retrieved on 07/08/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).