Skip to content
maunawai.info

Italy · Comune

Drinking water in San Canzian d'Isonzo

One supply zone, published by IrisAcqua S.r.l.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Isola Morosini

IrisAcqua S.r.l.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
13.4 °dH
Key values Isola Morosini
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 16 mg/L 50 mg/l
32 %
Single value · Isola Morosini
Sulphate 26,0 mg/L 250 mg/l
10 %
Single value · Isola Morosini
Sodium 4,0 mg/L 200 mg/l
2 %
Single value · Isola Morosini
Show all recorded parameters (18 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Isola Morosini
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 1 µg/L 10 µg/l
10 %
Single value · Isola Morosini
Fluoride 0,10 mg/L 1.5 mg/l
7 %
Single value · Isola Morosini
Nitrate 16 mg/L 50 mg/l
32 %
Single value · Isola Morosini
Nitrite 0,02 mg/L 0.5 mg/l
4 %
Single value · Isola Morosini

Indicator parameters (7)

Indicator parameters – Isola Morosini
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,02 mg/L 0.5 mg/l
4 %
Single value · Isola Morosini
Chloride 5,0 mg/L 250 mg/l
2 %
Single value · Isola Morosini
Conductivity (25 °C) 414 µS/cm a 20°C 2,500 µS/cm Single value · Isola Morosini
Manganese 5 µg/L 50 µg/l
10 %
Single value · Isola Morosini
pH 7,6 unità pH a 20°C 6,5–9,5 Single value · Isola Morosini
Sodium 4,0 mg/L 200 mg/l
2 %
Single value · Isola Morosini
Sulphate 26,0 mg/L 250 mg/l
10 %
Single value · Isola Morosini

Treatment substances (1)

Treatment substances – Isola Morosini
Parameter Value Parametric value Share of the parametric value Reference
Total chlorine <0,02 mg/l Cl2
below limit of quantification
Single value · Isola Morosini

Further parameters (6)

Further parameters – Isola Morosini
Parameter Value Parametric value Share of the parametric value Reference
Calcium 58,0 mg/L Single value · Isola Morosini
Dry residue 300 mg/L Single value · Isola Morosini
Hydrogen carbonate 238 mg/L Single value · Isola Morosini
Magnesium 23 mg/L Single value · Isola Morosini
Potassium 1 mg/L Single value · Isola Morosini
Total hardness 24 °F Single value · Isola Morosini

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.irisacqua.it/wp-content/uploads/2020/07/QualitÃ-dellacqua-I-semestre-2018.pdf · Anno 2018 - I semestre · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).