Skip to content
maunawai.info

Italy · Comune

Drinking water in Rignano Flaminio

5 supply zones, published by ACEA ATO 2 S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Zona 1 San Sisinio

ACEA ATO 2 S.p.A.
Water hardness
28.6 °dH
Key values Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 0,50 mg/L NO3 50 mg/l
1 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 91,4 mg/L SO4 250 mg/l
37 %
Median
Sodium 32,8 mg/L Na 200 mg/l
16 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 5,40 µg/L As 10 µg/l
54 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,142 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,99 mg/L 1.5 mg/l
66 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 0,50 mg/L NO3 50 mg/l
1 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 1,70 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 4,6 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 44,1 mg/L Cl 250 mg/l
18 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 944 µS/cm 2,500 µS/cm Median
Iron 44,5 µg/L Fe 0.2 mg/l Median
Manganese 0,70 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,30 pH 6,5–9,5 Median
Sodium 32,8 mg/L Na 200 mg/l
16 %
Median
Sulphate 91,4 mg/L SO4 250 mg/l
37 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 15,0 °C Median
Total organic carbon (TOC) 0,36 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,24 mg/L Cl2 Median

Further parameters (13)

Further parameters – Zona 1 San Sisinio
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 432 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 135,00 mg/L Ca Median
Dry residue 719 mg/L Median
Hydrogen carbonate 527 mg/L HCO3 Median
Magnesium 42,30 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 8,95 mg/L K Median
Silicate / silicic acid 39,4 mg/L SiO2 Median
Thallium <0,20 µg/L Tl
below limit of quantification
Median
Total hardness 51,1 °F Median
Vanadium 1,00 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Zona 2 Monte Onorio

ACEA ATO 2 S.p.A.
Water hardness
10.5 °dH
Key values Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 15,40 mg/L NO3 50 mg/l
31 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL
not detectable
0/100 ml Median
Sulphate 18,6 mg/L SO4 250 mg/l
7 %
Median
Sodium 22,2 mg/L Na 200 mg/l
11 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL
not detectable
0/100 ml Median
Intestinal enterococci Conforme N/100 mL
not detectable
0/100 ml Median

Chemical parameters (28)

Chemical parameters – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 8,00 µg/L As 10 µg/l
80 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,066 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,80 mg/L 1.5 mg/l
53 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 15,40 mg/L NO3 50 mg/l
31 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total 2,8 µg/L 30 µg/l
9 %
Median
Uranium 3,70 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 8,5 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 19,2 mg/L Cl 250 mg/l
8 %
Median
Coliform bacteria Conforme MPN/100 mL
not detectable
0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 473 µS/cm 2,500 µS/cm Median
Iron 12,1 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,80 pH 6,5–9,5 Median
Sodium 22,2 mg/L Na 200 mg/l
11 %
Median
Sulphate 18,6 mg/L SO4 250 mg/l
7 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 15,0 °C Median
Total organic carbon (TOC) 0,52 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,18 mg/L Cl2 Median

Further parameters (13)

Further parameters – Zona 2 Monte Onorio
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 217 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 54,60 mg/L Ca Median
Dry residue 338 mg/L Median
Hydrogen carbonate 265 mg/L HCO3 Median
Magnesium 12,10 mg/L Mg Median
Phosphate 165 µg/L P2O5 Median
Potassium 25,40 mg/L K Median
Silicate / silicic acid 54,3 mg/L SiO2 Median
Thallium <0,20 µg/L Tl
below limit of quantification
Median
Total hardness 18,7 °F Median
Vanadium 9,20 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 3 EX MAREMMA

ACEA ATO 2 S.p.A.
Water hardness
8.8 °dH
Key values ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 19,60 mg/L NO3 50 mg/l
39 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 10,2 mg/L SO4 250 mg/l
4 %
Median
Sodium 21,0 mg/L Na 200 mg/l
11 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 9,10 µg/L As 10 µg/l
91 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,085 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,64 mg/L 1.5 mg/l
43 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 19,60 mg/L NO3 50 mg/l
39 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total 2,4 µg/L 30 µg/l
8 %
Median
Uranium 3,15 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 4,0 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 16,7 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 427 µS/cm 2,500 µS/cm Median
Iron <5,0 µg/L Fe
below limit of quantification
0.2 mg/l Median
Manganese <0,2 µg/L Mn
below limit of quantification
50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,95 pH 6,5–9,5 Median
Sodium 21,0 mg/L Na 200 mg/l
11 %
Median
Sulphate 10,2 mg/L SO4 250 mg/l
4 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 14,5 °C Median
Total organic carbon (TOC) 0,49 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,16 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 3 EX MAREMMA
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 204 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 47,35 mg/L Ca Median
Dry residue 305 mg/L Median
Hydrogen carbonate 249 mg/L HCO3 Median
Magnesium 9,39 mg/L Mg Median
Phosphate 238 µg/L P2O5 Median
Potassium 25,75 mg/L K Median
Silicate / silicic acid 46,4 mg/L SiO2 Median
Thallium <0,20 µg/L Tl
below limit of quantification
Median
Total hardness 15,7 °F Median
Vanadium 20,10 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Zona 4 Punta Verde

ACEA ATO 2 S.p.A.
Water hardness
9 °dH
Key values Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 20,55 mg/L NO3 50 mg/l
41 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 12,45 mg/L SO4 250 mg/l
5 %
Median
Sodium 20,8 mg/L Na 200 mg/l
10 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 7,68 µg/L As 10 µg/l
77 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,039 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,55 mg/L 1.5 mg/l
37 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 20,55 mg/L NO3 50 mg/l
41 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total 2,15 µg/L 30 µg/l
7 %
Median
Uranium 3,20 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 11,3 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 18,2 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 429 µS/cm 2,500 µS/cm Median
Iron <5,0 µg/L Fe
below limit of quantification
0.2 mg/l Median
Manganese <0,2 µg/L Mn
below limit of quantification
50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,80 pH 6,5–9,5 Median
Sodium 20,8 mg/L Na 200 mg/l
10 %
Median
Sulphate 12,45 mg/L SO4 250 mg/l
5 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 14,5 °C Median
Total organic carbon (TOC) 0,49 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,16 mg/L Cl2 Median

Further parameters (13)

Further parameters – Zona 4 Punta Verde
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 199 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 47,20 mg/L Ca Median
Dry residue 306 mg/L Median
Hydrogen carbonate 243 mg/L HCO3 Median
Magnesium 10,02 mg/L Mg Median
Phosphate µg/L P2O5
not determined
Median
Potassium 25,20 mg/L K Median
Silicate / silicic acid 63,4 mg/L SiO2 Median
Thallium <0,20 µg/L Tl
below limit of quantification
Median
Total hardness 16,0 °F Median
Vanadium 19,90 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 5 POGGIO D'ORO

ACEA ATO 2 S.p.A.
Water hardness
9.2 °dH
Key values ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 12,70 mg/L NO3 50 mg/l
25 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 12,9 mg/L SO4 250 mg/l
5 %
Median
Sodium 18,9 mg/L Na 200 mg/l
9 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 7,63 µg/L As 10 µg/l
76 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,038 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,36 mg/L 1.5 mg/l
24 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 12,70 mg/L NO3 50 mg/l
25 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total 2,15 µg/L 30 µg/l
7 %
Median
Uranium 2,40 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 6,0 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 19,1 mg/L Cl 250 mg/l
8 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 430 µS/cm 2,500 µS/cm Median
Iron <5,0 µg/L Fe
below limit of quantification
0.2 mg/l Median
Manganese <0,2 µg/L Mn
below limit of quantification
50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,80 pH 6,5–9,5 Median
Sodium 18,9 mg/L Na 200 mg/l
9 %
Median
Sulphate 12,9 mg/L SO4 250 mg/l
5 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 14,5 °C Median
Total organic carbon (TOC) 0,49 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,15 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 5 POGGIO D'ORO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 199 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 49,40 mg/L Ca Median
Dry residue 307 mg/L Median
Hydrogen carbonate 243 mg/L HCO3 Median
Magnesium 9,26 mg/L Mg Median
Phosphate 264 µg/L P2O5 Median
Potassium 21,10 mg/L K Median
Silicate / silicic acid 72,6 mg/L SiO2 Median
Thallium <0,20 µg/L Tl
below limit of quantification
Median
Total hardness 16,5 °F Median
Vanadium 20,00 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).