Skip to content
maunawai.info

Italy · Comune

Drinking water in Noale

One supply zone, published by VERITAS S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Water hardness
16.2 °dH
Key values Noale
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,0015 µg/l
below limit of quantification
0.1 µg/l
< 2 % *
Single value
Nitrate 18,48 mg/l 50 mg/l
37 %
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Escherichia coli (E. coli) Non rilevato UFC/100ml
not detectable
0/100 ml Single value
Sulphate 20,12 mg/l 250 mg/l
8 %
Single value
Sodium 4,72 mg/l 200 mg/l
2 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (98 — most recent value per parameter)

Microbiology (2)

Microbiology – Noale
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Non rilevato UFC/100ml
not detectable
0/100 ml Single value
Intestinal enterococci Non rilevato UFC/100ml
not detectable
0/100 ml Single value

Chemical parameters (66)

Chemical parameters – Noale
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
2,6-Dichlorobenzamide (BAM) <0,01 µg/l
below limit of quantification
Single value
Aclonifen <0,01 µg/l
below limit of quantification
Single value
Acrylamide <0,03 µg/l
below limit of quantification
0.1 µg/l
< 30 % *
Single value
Aldrin <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
AMPA <0,02 µg/l
below limit of quantification
Single value
Antimony <0,2 µg/l
below limit of quantification
10 µg/l
< 2 % *
Single value
Arsenic <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine <0,01 µg/l
below limit of quantification
Single value
Azoxystrobin <0,01 µg/l
below limit of quantification
Single value
Bentazone <0,01 µg/l
below limit of quantification
Single value
Benzene <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Benzo(a)pyrene <0,0025 µg/l
below limit of quantification
10 ng/l
< 25 % *
Single value
Bisphenol A <0,25 µg/l
below limit of quantification
2.5 µg/l
< 10 % *
Single value
Boron 0,01 mg/l 1.5 mg/l
0.7 %
Single value
Boscalid <0,025 µg/l
below limit of quantification
Single value
Bromate <3 µg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,1 µg/l
below limit of quantification
5 µg/l
< 2 % *
Single value
Chlorate <0,1 µg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value
Chlorite <0,1 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value
Chromium 1,17 µg/l 25 µg/l
5 %
Single value
Clomazone <0,01 µg/l
below limit of quantification
Single value
Copper 0,001 mg/l 2 mg/l
< 0.1 %
Single value
Cyanide <10 µg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Dieldrin <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Diuron <0,01 µg/l
below limit of quantification
Single value
Epichlorohydrin <0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value
Fludioxonil <0,01 µg/l
below limit of quantification
Single value
Flufenacet <0,01 µg/l
below limit of quantification
Single value
Fluopicolide <0,01 µg/l
below limit of quantification
Single value
Fluoride 0,08 mg/l 1.5 mg/l
5 %
Single value
Glyphosate <0,02 µg/l
below limit of quantification
Single value
Haloacetic acids (HAA) <3 µg/l
below limit of quantification
60 µg/l
< 5 % *
Single value
Heptachlor <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Heptachlor epoxide <0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Imidacloprid <0,01 µg/l
below limit of quantification
Single value
Isoproturon <0,01 µg/l
below limit of quantification
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Lenacil <0,01 µg/l
below limit of quantification
Single value
Linuron <0,01 µg/l
below limit of quantification
Single value
MCPA <0,010 µg/l
below limit of quantification
Single value
Mecoprop <0,010 µg/l
below limit of quantification
Single value
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Metamitron <0,01 µg/l
below limit of quantification
Single value
Metolachlor <0,01 µg/l
below limit of quantification
Single value
Metribuzin <0,01 µg/l
below limit of quantification
Single value
Microcystin-LR <0,01 µg/l
below limit of quantification
1 µg/l
< 1 % *
Single value
Molinate <0,01 µg/l
below limit of quantification
Single value
Nickel <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nicosulfuron <0,025 µg/l
below limit of quantification
Single value
Nitrate 18,48 mg/l 50 mg/l
37 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total 0,06 µg/l 0.5 µg/l
12 %
Single value
Polycyclic aromatic hydrocarbons <0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Propamocarb <0,01 µg/l
below limit of quantification
Single value
Pyrimethanil <0,01 µg/l
below limit of quantification
Single value
Quinoxyfen <0,01 µg/l
below limit of quantification
Single value
Rimsulfuron <0,025 µg/l
below limit of quantification
Single value
Selenium <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Tebufenozide <0,01 µg/l
below limit of quantification
Single value
Tetrachloroethene and Trichloroethene (sum) 1,06 µg/l 10 µg/l
11 %
Single value
Tetraconazole <0,01 µg/l
below limit of quantification
Single value
Trifluralin <0,01 µg/l
below limit of quantification
Single value
Trihalomethanes — Total 0,21 µg/l 30 µg/l
0.7 %
Single value
Uranium <30 µg/l
below limit of quantification
30 µg/l
< 100 % *
Single value
Vinyl chloride <0,1 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (3)

PFAS – Noale
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,0015 µg/l
below limit of quantification
20 ng/l
< 8 % *
Single value
Sum of PFAS <0,0015 µg/l
below limit of quantification
0.1 µg/l
< 2 % *
Single value
Trifluoroacetic acid (TFA) 0,27 µg/l 10 µg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (18)

Indicator parameters – Noale
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 8,47 µg/l 0.2 mg/l
4 %
Single value
Ammonium <0,05 mg/l NH4
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Chloride 6,30 mg/l 250 mg/l
3 %
Single value
Clostridium perfringens (including spores) Non rilevato UFC/100ml
not detectable
0/100 ml Single value
Coliform bacteria Non rilevato UFC/100ml
not detectable
0/100 ml Single value
Colony count 22 °C Non rilevato UFC/ml
not detectable
senza variazioni anomale Single value
Colour <5 unità Pt/Co
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value
Conductivity (25 °C) 487 µs/cm a 20°C 2,500 µS/cm Single value
Iron <5 µg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese <1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Odour Assente -
not detectable
accettabile per i consumatori, senza variazioni anomale Single value
pH 7,41 unità pH 6,5–9,5 Single value
Sodium 4,72 mg/l 200 mg/l
2 %
Single value
Sulphate 20,12 mg/l 250 mg/l
8 %
Single value
Taste Assente -
not detectable
accettabile per i consumatori, senza variazioni anomale Single value
Temperature 12,7 °C Single value
Total organic carbon (TOC) <0,3 mg/l
below limit of quantification
senza variazioni anomale Single value
Turbidity <0,1 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Noale
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,18 mg/l Single value

Further parameters (8)

Further parameters – Noale
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 265 mg/l CaCO3 Single value
Calcium 67,99 mg/l Single value
Dry residue 300 mg/l Single value
Hydrogen carbonate 323 mg/l HCO3 Single value
Magnesium 28,06 mg/l Single value
Potassium 1,11 mg/l Single value
Total hardness 29 °F Single value
Vanadium <1 µg/l
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).