Skip to content
maunawai.info

Italy · Comune

Drinking water in Montescano

5 supply zones, published by Pavia Acque. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Gerenzago

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
6.7 °dH
Key values Gerenzago
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 1,5 mg/L NO3
below limit of quantification
50 mg/l
< 3 % *
Single value · Gerenzago
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Gerenzago
Sulphate 3 mg/L SO4 250 mg/l
1 %
Single value · Gerenzago
Sodium 7 mg/L Na 200 mg/l
3 %
Single value · Gerenzago

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (22)

Chemical parameters – Gerenzago
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Single value · Gerenzago
Antimony < 1 µg/L Sb
below limit of quantification
10 µg/l
< 10 % *
Single value · Gerenzago
Arsenic 3 µg/L As 10 µg/l
30 %
Single value · Gerenzago
Benzene < 0,1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Gerenzago
Bromodichloromethane < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Cadmium < 0,5 µg/L Cd
below limit of quantification
5 µg/l
< 10 % *
Single value · Gerenzago
Chromium < 1 µg/L Cr
below limit of quantification
50 µg/l
< 2 % *
Single value · Gerenzago
Copper < 0,1 mg/L Cu
below limit of quantification
2 mg/l
< 5 % *
Single value · Gerenzago
Dibromochloromethane < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Fluoride < 0,1 mg/L F
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Gerenzago
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Gerenzago
Nickel < 1 µg/L Ni
below limit of quantification
20 µg/l
< 5 % *
Single value · Gerenzago
Nitrate < 1,5 mg/L NO3
below limit of quantification
50 mg/l
< 3 % *
Single value · Gerenzago
Nitrite < 0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Gerenzago
Tetrachloroethene < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Tetrachloroethene and Trichloroethene (sum) < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Gerenzago
Tribromomethane (bromoform) < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Trichloroethene < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Trichloromethane (chloroform) < 0,1 µg/L
below limit of quantification
Single value · Gerenzago
Trihalomethanes — Total < 1 µg/L
below limit of quantification
30 µg/l
< 3 % *
Single value · Gerenzago
Uranium < 1 µg/L U
below limit of quantification
30 µg/l
< 3 % *
Single value · Gerenzago
Vinyl chloride < 0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Gerenzago

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Gerenzago
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Gerenzago
Chloride 2 mg/L Cl 250 mg/l
0.8 %
Single value · Gerenzago
Conductivity (25 °C) 235 µS/cm 2,500 µS/cm Single value · Gerenzago
Iron 7 µg/L Fe 0.2 mg/l
3 %
Single value · Gerenzago
Manganese < 5 µg/L Mn
below limit of quantification
50 µg/l
< 10 % *
Single value · Gerenzago
pH 8,0 unità pH 6,5–9,5 Single value · Gerenzago
Sodium 7 mg/L Na 200 mg/l
3 %
Single value · Gerenzago
Sulphate 3 mg/L SO4 250 mg/l
1 %
Single value · Gerenzago
Total organic carbon (TOC) < 0,3 mg/L C
below limit of quantification
senza variazioni anomale Single value · Gerenzago

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Gerenzago
Parameter Value Parametric value Share of the parametric value Reference
Bromide < 0,05 mg/L Br
below limit of quantification
Single value · Gerenzago
Calcium 35 mg/L Ca Single value · Gerenzago
Dry residue 146 mg/L Single value · Gerenzago
Magnesium 7,2 mg/L Mg Single value · Gerenzago
Phosphate 0,19 mg/L P2O5 Single value · Gerenzago
Potassium 1,4 mg/L K Single value · Gerenzago
Total hardness 12 °F Single value · Gerenzago
Vanadium < 1 µg/L V
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value · Gerenzago
Zinc 7 µg/L Zn Single value · Gerenzago

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.22_BSP_Zenevredo.pdf · 30/04/2024 · Campionamento 22-23/04/2024, Analisi 23-30/04/2024 · retrieved on 08/07/2026

Inverno e Monteleone

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
6.7 °dH
Key values Inverno e Monteleone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 1,5 mg/L NO3
below limit of quantification
50 mg/l
< 3 % *
Single value · Inverno e Monteleone
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Inverno e Monteleone
Sulphate 2 mg/L SO4 250 mg/l
0.8 %
Single value · Inverno e Monteleone
Sodium 8 mg/L Na 200 mg/l
4 %
Single value · Inverno e Monteleone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (22)

Chemical parameters – Inverno e Monteleone
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Single value · Inverno e Monteleone
Antimony < 1 µg/L Sb
below limit of quantification
10 µg/l
< 10 % *
Single value · Inverno e Monteleone
Arsenic 4 µg/L As 10 µg/l
40 %
Single value · Inverno e Monteleone
Benzene < 0,1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Inverno e Monteleone
Bromodichloromethane 0,2 µg/L Single value · Inverno e Monteleone
Cadmium < 0,5 µg/L Cd
below limit of quantification
5 µg/l
< 10 % *
Single value · Inverno e Monteleone
Chromium < 1 µg/L Cr
below limit of quantification
50 µg/l
< 2 % *
Single value · Inverno e Monteleone
Copper < 0,1 mg/L Cu
below limit of quantification
2 mg/l
< 5 % *
Single value · Inverno e Monteleone
Dibromochloromethane 0,2 µg/L Single value · Inverno e Monteleone
Fluoride < 0,1 mg/L F
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Inverno e Monteleone
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Inverno e Monteleone
Nickel < 1 µg/L Ni
below limit of quantification
20 µg/l
< 5 % *
Single value · Inverno e Monteleone
Nitrate < 1,5 mg/L NO3
below limit of quantification
50 mg/l
< 3 % *
Single value · Inverno e Monteleone
Nitrite < 0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Inverno e Monteleone
Tetrachloroethene < 0,1 µg/L
below limit of quantification
Single value · Inverno e Monteleone
Tetrachloroethene and Trichloroethene (sum) < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Inverno e Monteleone
Tribromomethane (bromoform) < 0,1 µg/L
below limit of quantification
Single value · Inverno e Monteleone
Trichloroethene < 0,1 µg/L
below limit of quantification
Single value · Inverno e Monteleone
Trichloromethane (chloroform) 0,2 µg/L Single value · Inverno e Monteleone
Trihalomethanes — Total < 1 µg/L
below limit of quantification
30 µg/l
< 3 % *
Single value · Inverno e Monteleone
Uranium < 1 µg/L U
below limit of quantification
30 µg/l
< 3 % *
Single value · Inverno e Monteleone
Vinyl chloride < 0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Inverno e Monteleone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Inverno e Monteleone
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Inverno e Monteleone
Chloride 2 mg/L Cl 250 mg/l
0.8 %
Single value · Inverno e Monteleone
Conductivity (25 °C) 259 µS/cm 2,500 µS/cm Single value · Inverno e Monteleone
Iron < 5 µg/L Fe
below limit of quantification
0.2 mg/l
< 3 % *
Single value · Inverno e Monteleone
Manganese < 5 µg/L Mn
below limit of quantification
50 µg/l
< 10 % *
Single value · Inverno e Monteleone
pH 7,9 unità pH 6,5–9,5 Single value · Inverno e Monteleone
Sodium 8 mg/L Na 200 mg/l
4 %
Single value · Inverno e Monteleone
Sulphate 2 mg/L SO4 250 mg/l
0.8 %
Single value · Inverno e Monteleone
Total organic carbon (TOC) < 0,3 mg/L C
below limit of quantification
senza variazioni anomale Single value · Inverno e Monteleone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Inverno e Monteleone
Parameter Value Parametric value Share of the parametric value Reference
Bromide < 0,05 mg/L Br
below limit of quantification
Single value · Inverno e Monteleone
Calcium 36 mg/L Ca Single value · Inverno e Monteleone
Dry residue 160 mg/L Single value · Inverno e Monteleone
Magnesium 8,6 mg/L Mg Single value · Inverno e Monteleone
Phosphate < 0,15 mg/L P2O5
below limit of quantification
Single value · Inverno e Monteleone
Potassium 1,2 mg/L K Single value · Inverno e Monteleone
Total hardness 12 °F Single value · Inverno e Monteleone
Vanadium < 1 µg/L V
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value · Inverno e Monteleone
Zinc 6 µg/L Zn Single value · Inverno e Monteleone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.22_BSP_Zenevredo.pdf · 30/04/2024 · Campionamento 22-23/04/2024, Analisi 23-30/04/2024 · retrieved on 08/07/2026

Montalto Pavese

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16.2 °dH
Key values Montalto Pavese
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6 mg/L NO3 50 mg/l
12 %
Single value · Montalto Pavese
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montalto Pavese
Sulphate 51 mg/L SO4 250 mg/l
20 %
Single value · Montalto Pavese
Sodium 24 mg/L Na 200 mg/l
12 %
Single value · Montalto Pavese

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (22)

Chemical parameters – Montalto Pavese
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Single value · Montalto Pavese
Antimony < 1 µg/L Sb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montalto Pavese
Arsenic 2 µg/L As 10 µg/l
20 %
Single value · Montalto Pavese
Benzene < 0,1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Montalto Pavese
Bromodichloromethane 0,1 µg/L Single value · Montalto Pavese
Cadmium < 0,5 µg/L Cd
below limit of quantification
5 µg/l
< 10 % *
Single value · Montalto Pavese
Chromium < 1 µg/L Cr
below limit of quantification
50 µg/l
< 2 % *
Single value · Montalto Pavese
Copper < 0,1 mg/L Cu
below limit of quantification
2 mg/l
< 5 % *
Single value · Montalto Pavese
Dibromochloromethane 0,5 µg/L Single value · Montalto Pavese
Fluoride < 0,1 mg/L F
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Montalto Pavese
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montalto Pavese
Nickel 1 µg/L Ni 20 µg/l
5 %
Single value · Montalto Pavese
Nitrate 6 mg/L NO3 50 mg/l
12 %
Single value · Montalto Pavese
Nitrite < 0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Montalto Pavese
Tetrachloroethene 0,2 µg/L Single value · Montalto Pavese
Tetrachloroethene and Trichloroethene (sum) < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Montalto Pavese
Tribromomethane (bromoform) 1,3 µg/L Single value · Montalto Pavese
Trichloroethene < 0,1 µg/L
below limit of quantification
Single value · Montalto Pavese
Trichloromethane (chloroform) < 0,1 µg/L
below limit of quantification
Single value · Montalto Pavese
Trihalomethanes — Total 2 µg/L 30 µg/l
7 %
Single value · Montalto Pavese
Uranium 1 µg/L U 30 µg/l
3 %
Single value · Montalto Pavese
Vinyl chloride < 0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Montalto Pavese

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Montalto Pavese
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Montalto Pavese
Chloride 31 mg/L Cl 250 mg/l
12 %
Single value · Montalto Pavese
Conductivity (25 °C) 616 µS/cm 2,500 µS/cm Single value · Montalto Pavese
Iron 8 µg/L Fe 0.2 mg/l
4 %
Single value · Montalto Pavese
Manganese < 5 µg/L Mn
below limit of quantification
50 µg/l
< 10 % *
Single value · Montalto Pavese
pH 7,8 unità pH 6,5–9,5 Single value · Montalto Pavese
Sodium 24 mg/L Na 200 mg/l
12 %
Single value · Montalto Pavese
Sulphate 51 mg/L SO4 250 mg/l
20 %
Single value · Montalto Pavese
Total organic carbon (TOC) 0,49 mg/L C senza variazioni anomale Single value · Montalto Pavese

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Montalto Pavese
Parameter Value Parametric value Share of the parametric value Reference
Bromide 0,07 mg/L Br Single value · Montalto Pavese
Calcium 84 mg/L Ca Single value · Montalto Pavese
Dry residue 382 mg/L Single value · Montalto Pavese
Magnesium 19,3 mg/L Mg Single value · Montalto Pavese
Phosphate < 0,15 mg/L P2O5
below limit of quantification
Single value · Montalto Pavese
Potassium 1,9 mg/L K Single value · Montalto Pavese
Total hardness 29 °F Single value · Montalto Pavese
Vanadium < 1 µg/L V
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value · Montalto Pavese
Zinc 68 µg/L Zn Single value · Montalto Pavese

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.22_BSP_Zenevredo.pdf · 30/04/2024 · Campionamento 22-23/04/2024, Analisi 23-30/04/2024 · retrieved on 08/07/2026

Montescano

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
15.7 °dH
Key values Montescano
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6 mg/L NO3 50 mg/l
12 %
Single value · Montescano
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montescano
Sulphate 46 mg/L SO4 250 mg/l
18 %
Single value · Montescano
Sodium 23 mg/L Na 200 mg/l
12 %
Single value · Montescano

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (22)

Chemical parameters – Montescano
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Single value · Montescano
Antimony < 1 µg/L Sb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montescano
Arsenic 2 µg/L As 10 µg/l
20 %
Single value · Montescano
Benzene < 0,1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Montescano
Bromodichloromethane 0,2 µg/L Single value · Montescano
Cadmium < 0,5 µg/L Cd
below limit of quantification
5 µg/l
< 10 % *
Single value · Montescano
Chromium < 1 µg/L Cr
below limit of quantification
50 µg/l
< 2 % *
Single value · Montescano
Copper < 0,1 mg/L Cu
below limit of quantification
2 mg/l
< 5 % *
Single value · Montescano
Dibromochloromethane 0,6 µg/L Single value · Montescano
Fluoride < 0,1 mg/L F
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Montescano
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Montescano
Nickel 2 µg/L Ni 20 µg/l
10 %
Single value · Montescano
Nitrate 6 mg/L NO3 50 mg/l
12 %
Single value · Montescano
Nitrite < 0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Montescano
Tetrachloroethene 0,3 µg/L Single value · Montescano
Tetrachloroethene and Trichloroethene (sum) < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Montescano
Tribromomethane (bromoform) 2,4 µg/L Single value · Montescano
Trichloroethene < 0,1 µg/L
below limit of quantification
Single value · Montescano
Trichloromethane (chloroform) < 0,1 µg/L
below limit of quantification
Single value · Montescano
Trihalomethanes — Total 3 µg/L 30 µg/l
10 %
Single value · Montescano
Uranium 1 µg/L U 30 µg/l
3 %
Single value · Montescano
Vinyl chloride < 0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Montescano

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Montescano
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Montescano
Chloride 30 mg/L Cl 250 mg/l
12 %
Single value · Montescano
Conductivity (25 °C) 596 µS/cm 2,500 µS/cm Single value · Montescano
Iron < 5 µg/L Fe
below limit of quantification
0.2 mg/l
< 3 % *
Single value · Montescano
Manganese < 5 µg/L Mn
below limit of quantification
50 µg/l
< 10 % *
Single value · Montescano
pH 7,6 unità pH 6,5–9,5 Single value · Montescano
Sodium 23 mg/L Na 200 mg/l
12 %
Single value · Montescano
Sulphate 46 mg/L SO4 250 mg/l
18 %
Single value · Montescano
Total organic carbon (TOC) 0,40 mg/L C senza variazioni anomale Single value · Montescano

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Montescano
Parameter Value Parametric value Share of the parametric value Reference
Bromide 0,05 mg/L Br Single value · Montescano
Calcium 82 mg/L Ca Single value · Montescano
Dry residue 370 mg/L Single value · Montescano
Magnesium 18,2 mg/L Mg Single value · Montescano
Phosphate < 0,15 mg/L P2O5
below limit of quantification
Single value · Montescano
Potassium 1,8 mg/L K Single value · Montescano
Total hardness 28 °F Single value · Montescano
Vanadium < 1 µg/L V
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value · Montescano
Zinc 12 µg/L Zn Single value · Montescano

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.22_BSP_Zenevredo.pdf · 30/04/2024 · Campionamento 22-23/04/2024, Analisi 23-30/04/2024 · retrieved on 08/07/2026

Zenevredo Fraz. Bettola

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
19 °dH
Key values Zenevredo Fraz. Bettola
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 25 mg/L NO3 50 mg/l
50 %
Single value · Zenevredo - Fraz. Bettola
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Sulphate 69 mg/L SO4 250 mg/l
28 %
Single value · Zenevredo - Fraz. Bettola
Sodium 31 mg/L Na 200 mg/l
16 %
Single value · Zenevredo - Fraz. Bettola

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (51 — most recent value per parameter)

Chemical parameters (33)

Chemical parameters – Zenevredo Fraz. Bettola
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Single value · Zenevredo - Fraz. Bettola
2,6-Dichlorobenzamide (BAM) 0,08 µg/L Single value · Zenevredo - Fraz. Bettola
Antimony < 1 µg/L Sb
below limit of quantification
10 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Arsenic 1 µg/L As 10 µg/l
10 %
Single value · Zenevredo - Fraz. Bettola
Atrazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Bentazone < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Benzene < 0,1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Bromodichloromethane < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Cadmium < 0,5 µg/L Cd
below limit of quantification
5 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Chromium 8 µg/L Cr 50 µg/l
16 %
Single value · Zenevredo - Fraz. Bettola
Copper < 0,1 mg/L Cu
below limit of quantification
2 mg/l
< 5 % *
Single value · Zenevredo - Fraz. Bettola
Desethylatrazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Desethylterbuthylazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Dibromochloromethane < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Fluoride 0,1 mg/L F 1.5 mg/l
7 %
Single value · Zenevredo - Fraz. Bettola
Lead < 1 µg/L Pb
below limit of quantification
10 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Metolachlor < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Molinate < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Nickel 3 µg/L Ni 20 µg/l
15 %
Single value · Zenevredo - Fraz. Bettola
Nitrate 25 mg/L NO3 50 mg/l
50 %
Single value · Zenevredo - Fraz. Bettola
Nitrite < 0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Pesticides — Total 0,13 µg/L 0.5 µg/l
26 %
Single value · Zenevredo - Fraz. Bettola
Propazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Simazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Terbuthylazine < 0,02 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Tetrachloroethene < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Tetrachloroethene and Trichloroethene (sum) < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
Tribromomethane (bromoform) < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Trichloroethene < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Trichloromethane (chloroform) < 0,1 µg/L
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Trihalomethanes — Total < 1 µg/L
below limit of quantification
30 µg/l
< 3 % *
Single value · Zenevredo - Fraz. Bettola
Uranium 2 µg/L U 30 µg/l
7 %
Single value · Zenevredo - Fraz. Bettola
Vinyl chloride < 0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Zenevredo - Fraz. Bettola

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Zenevredo Fraz. Bettola
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Zenevredo - Fraz. Bettola
Chloride 58 mg/L Cl 250 mg/l
23 %
Single value · Zenevredo - Fraz. Bettola
Conductivity (25 °C) 895 µS/cm 2,500 µS/cm Single value · Zenevredo - Fraz. Bettola
Iron 30 µg/L Fe 0.2 mg/l
15 %
Single value · Zenevredo - Fraz. Bettola
Manganese < 5 µg/L Mn
below limit of quantification
50 µg/l
< 10 % *
Single value · Zenevredo - Fraz. Bettola
pH 7,4 unità pH 6,5–9,5 Single value · Zenevredo - Fraz. Bettola
Sodium 31 mg/L Na 200 mg/l
16 %
Single value · Zenevredo - Fraz. Bettola
Sulphate 69 mg/L SO4 250 mg/l
28 %
Single value · Zenevredo - Fraz. Bettola
Total organic carbon (TOC) 0,42 mg/L C senza variazioni anomale Single value · Zenevredo - Fraz. Bettola

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Zenevredo Fraz. Bettola
Parameter Value Parametric value Share of the parametric value Reference
Bromide 0,13 mg/L Br Single value · Zenevredo - Fraz. Bettola
Calcium 136 mg/L Ca Single value · Zenevredo - Fraz. Bettola
Dry residue 555 mg/L Single value · Zenevredo - Fraz. Bettola
Magnesium 24,4 mg/L Mg Single value · Zenevredo - Fraz. Bettola
Phosphate < 0,15 mg/L P2O5
below limit of quantification
Single value · Zenevredo - Fraz. Bettola
Potassium 1,2 mg/L K Single value · Zenevredo - Fraz. Bettola
Total hardness 34 °F Single value · Zenevredo - Fraz. Bettola
Vanadium < 1 µg/L V
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value · Zenevredo - Fraz. Bettola
Zinc 14 µg/L Zn Single value · Zenevredo - Fraz. Bettola

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/10/2024.04.22_BSP_Zenevredo.pdf · 30/04/2024 · Campionamento 22-23/04/2024, Analisi 23-30/04/2024 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).