Skip to content
maunawai.info

Italy · Comune

Drinking water in Monrupino-Repentabor

One supply zone, published by Acquedotto del Carso S.p.A. / Kraški Vodovod d.d.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Key values it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,010 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Nitrate 7,0 mg/l 50 mg/l
14 %
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (45 — most recent value per parameter)

Microbiology (2)

Microbiology – it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value
Intestinal enterococci 0 UFC/100 ml 0/100 ml Single value

Chemical parameters (28)

Chemical parameters – it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acrylamide <0,02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value
Antimony <0,5 µg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Arsenic <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Benzo(a)pyrene <0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Boron 0,02 mg/l 1.5 mg/l
1 %
Single value
Bromate <2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Cadmium <0,5 µg/l
below limit of quantification
5 µg/l
< 10 % *
Single value
Chlorate <0,10 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value
Chlorite <0,10 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value
Chromium <1 µg/l
below limit of quantification
25 µg/l
< 4 % *
Single value
Copper <0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Single value
Cyanide <5 µg/l CN
below limit of quantification
50 µg/l Single value
Epichlorohydrin <0,05 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Fluoride 0,11 mg/l 1.5 mg/l
7 %
Single value
Haloacetic acids (HAA) <5 µg/l
below limit of quantification
60 µg/l
< 8 % *
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Microcystin-LR <0,01 µg/l
below limit of quantification
1 µg/l
< 1 % *
Single value
Nickel <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 7,0 mg/l 50 mg/l
14 %
Single value
Nitrite <0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Pesticides — Total <0,010 µg/l
below limit of quantification
0.5 µg/l
< 2 % *
Single value
Polycyclic aromatic hydrocarbons <0,020 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value
Selenium <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Tetrachloroethene and Trichloroethene (sum) 0,1 µg/l 10 µg/l
1 %
Single value
Trihalomethanes — Total 5,4 µg/l 30 µg/l
18 %
Single value
Uranium <0,5 µg/l
below limit of quantification
30 µg/l
< 2 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (3)

PFAS – it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,005 µg/l
below limit of quantification
20 ng/l
< 25 % *
Single value
Sum of PFAS <0,010 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Trifluoroacetic acid (TFA) 2,17 µg/l 10 µg/l
22 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (11)

Indicator parameters – it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <10 µg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Ammonium <0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Clostridium perfringens (including spores) 0 UFC/100 ml 0/100 ml Single value
Coliform bacteria 0 MPN/100 ml 0/100 ml Single value
Colony count 22 °C 0 UFC/ml senza variazioni anomale Single value
Colour <5 Hazen
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value
Conductivity (25 °C) 378 µS cm-1 a 20 °C 2,500 µS/cm Single value
Iron <10 µg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Odour 0 tasso di diluizione accettabile per i consumatori, senza variazioni anomale Single value
pH 7,8 Unità pH 6,5–9,5 Single value
Turbidity <0,2 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – it-acquedotto-carso gesamt
Parameter Value Parametric value Share of the parametric value Reference
Vanadium <1 µg/l
below limit of quantification
0.14 mg/l
< 0.7 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://ackv.it/wp-content/uploads/2026/05/03-Marzo-2026-2.pdf · Mese di marzo 2026 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).