Skip to content
maunawai.info

Italy · Comune

Drinking water in Minervino Murge

One supply zone, published by Acquedotto Pugliese S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Minervino Murge (BT)

Acquedotto Pugliese S.p.A.
Key values Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3 mg/l NO₃ 50 mg/l
6 %
Single value · Minervino Murge (BT)
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Escherichia coli (E. coli) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · Minervino Murge (BT)
Sulphate 14 mg/l SO₄ 250 mg/l
6 %
Single value · Minervino Murge (BT)
Sodium 13 mg/l Na 200 mg/l
7 %
Single value · Minervino Murge (BT)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (53 — most recent value per parameter)

Microbiology (2)

Microbiology – Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · Minervino Murge (BT)
Intestinal enterococci <1 numero/100 ml
below limit of quantification
0/100 ml Single value · Minervino Murge (BT)

Chemical parameters (26)

Chemical parameters – Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,4 µg/l
below limit of quantification
3 µg/l
< 13 % *
Single value · Minervino Murge (BT)
Antimony <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Arsenic 1 µg/l As 10 µg/l
10 %
Single value · Minervino Murge (BT)
Benzene <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Benzo(a)pyrene <0,003 µg/l
below limit of quantification
10 ng/l
< 30 % *
Single value · Minervino Murge (BT)
Boron <0,1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Minervino Murge (BT)
Bromate <2 µg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Minervino Murge (BT)
Cadmium <1,0 µg/l
below limit of quantification
5 µg/l
< 20 % *
Single value · Minervino Murge (BT)
Chlorate <0,10 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value · Minervino Murge (BT)
Chlorite <0,10 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Single value · Minervino Murge (BT)
Chromium <1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Single value · Minervino Murge (BT)
Copper <0,1 mg/l
below limit of quantification
2 mg/l
< 5 % *
Single value · Minervino Murge (BT)
Cyanide <10 µg/l
below limit of quantification
50 µg/l
< 20 % *
Single value · Minervino Murge (BT)
Epichlorohydrin <0,02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value · Minervino Murge (BT)
Fluoride 0,2 mg/l F 1.5 mg/l
13 %
Single value · Minervino Murge (BT)
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Nickel <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value · Minervino Murge (BT)
Nitrate 3 mg/l NO₃ 50 mg/l
6 %
Single value · Minervino Murge (BT)
Nitrite <0,10 mg/l NO₂
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Minervino Murge (BT)
Pesticides — Total <0,01 µg/l
below limit of quantification
0.5 µg/l
< 2 % *
Single value · Minervino Murge (BT)
Polycyclic aromatic hydrocarbons <0,01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Selenium <1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Single value · Minervino Murge (BT)
Tetrachloroethene and Trichloroethene (sum) <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Minervino Murge (BT)
Trihalomethanes — Total <1 µg/l
below limit of quantification
30 µg/l
< 3 % *
Single value · Minervino Murge (BT)
Vinyl chloride <0,10 µg/l
below limit of quantification
0.5 µg/l
< 20 % *
Single value · Minervino Murge (BT)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (17)

Indicator parameters – Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 20 µg/l 0.2 mg/l
10 %
Single value · Minervino Murge (BT)
Ammonium <0,10 mg/l NH₄
below limit of quantification
0.5 mg/l
< 20 % *
Single value · Minervino Murge (BT)
Chloride 13 mg/l Cl 250 mg/l
5 %
Single value · Minervino Murge (BT)
Clostridium perfringens (including spores) <1 numero/100 ml
below limit of quantification
0/100 ml Single value · Minervino Murge (BT)
Coliform bacteria <1 numero/100 ml
below limit of quantification
0/100 ml Single value · Minervino Murge (BT)
Colony count 22 °C 0 numero/100 ml senza variazioni anomale Single value · Minervino Murge (BT)
Colour s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · Minervino Murge (BT)
Conductivity (25 °C) 344 µS/cm-1 a 20°C 2,500 µS/cm Single value · Minervino Murge (BT)
Iron <10 µg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Minervino Murge (BT)
Manganese <10 µg/l Mn
below limit of quantification
50 µg/l Single value · Minervino Murge (BT)
Odour s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · Minervino Murge (BT)
pH 7,7 Unità di pH 6,5–9,5 Single value · Minervino Murge (BT)
Sodium 13 mg/l Na 200 mg/l
7 %
Single value · Minervino Murge (BT)
Sulphate 14 mg/l SO₄ 250 mg/l
6 %
Single value · Minervino Murge (BT)
Taste s.v.r __ accettabile per i consumatori, senza variazioni anomale Single value · Minervino Murge (BT)
Total organic carbon (TOC) 0,95 mg/l senza variazioni anomale Single value · Minervino Murge (BT)
Turbidity 0,5 NTU accettabile per i consumatori, senza variazioni anomale Single value · Minervino Murge (BT)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
Total chlorine 0,2 mg/l Cl₂ Single value · Minervino Murge (BT)

Further parameters (7)

Further parameters – Minervino Murge (BT)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 52 mg/l Ca Single value · Minervino Murge (BT)
Dry residue 241 mg/l Single value · Minervino Murge (BT)
Hydrogen carbonate 220 mg/l HCO₃ Single value · Minervino Murge (BT)
Magnesium 8 mg/l Mg Single value · Minervino Murge (BT)
Potassium 2,9 mg/l K Single value · Minervino Murge (BT)
Total hardness 16 G.F. Single value · Minervino Murge (BT)
Vanadium <10 µg/l
below limit of quantification
0.14 mg/l
< 7 % *
Single value · Minervino Murge (BT)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aqp.it/scopri-acquedotto/qualita-acqua · Luglio - Dicembre 2025 · Luglio - Dicembre 2025 · retrieved on 07/08/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).