Italy · Comune

Drinking water in Medole

One supply zone, published by SICAM S.r.l. (Gruppo SISAM). The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Rete di Medole

SICAM S.r.l. (Gruppo SISAM)

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness

13.4 °dH

Key values Rete di Medole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	10,00 mg/l	50 mg/l	20 %	Mean
Sulphate	30,50 mg/l	250 mg/l	12 %	Mean
Sodium	4,20 mg/l	200 mg/l	2 %	Mean

Show all recorded parameters (18 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Rete di Medole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Arsenic	0,78 µg/l	10 µg/l	8 %	Mean
Fluoride	0,22 mg/l	1.5 mg/l	15 %	Mean
Nitrate	10,00 mg/l	50 mg/l	20 %	Mean
Nitrite	0,02 mg/l	0.5 mg/l	4 %	Mean

Indicator parameters (8)

Indicator parameters – Rete di Medole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Ammonium	0,05 mg/l	0.5 mg/l	10 %	Mean
Chloride	3,55 mg/l	250 mg/l	1 %	Mean
Conductivity (25 °C)	375,00 µS/cm	2,500 µS/cm	—	Mean
Iron	34,55 µg/l	0.2 mg/l	17 %	Mean
Manganese	7,30 µg/l	50 µg/l	15 %	Mean
pH	7,90 unità di pH	6,5–9,5	—	Mean
Sodium	4,20 mg/l	200 mg/l	2 %	Mean
Sulphate	30,50 mg/l	250 mg/l	12 %	Mean

Treatment substances (1)

Treatment substances – Rete di Medole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Free chlorine	0,05 mg/l	—	—	Mean

Further parameters (5)

Further parameters – Rete di Medole
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	59,50 mg/l	—	—	Mean
Dry residue	285,00 mg/l	—	—	Mean
Magnesium	22,50 mg/l	—	—	Mean
Potassium	1,04 mg/l	—	—	Mean
Total hardness	24,00 °F	—	—	Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: http://www.sisamspa.it/attachments/article/153/Medole_2_2025.pdf · 01/07/25 – 31/12/25 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).