Italy · Comune

Drinking water in Linarolo

2 supply zones, published by Pavia Acque. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

C-Linarolo

Pavia Acque

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 27/05/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness

5 °dH

Key values C-Linarolo
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	< 1,5 mg/L NO3 below limit of quantification	50 mg/l	< 3 % *	Single value · C-Linarolo
Lead	< 1 µg/L Pb below limit of quantification	10 µg/l	< 10 % *	Single value · C-Linarolo
Sulphate	< 1,5 mg/L SO4 below limit of quantification	250 mg/l	< 0.6 % *	Single value · C-Linarolo
Sodium	18 mg/L Na	200 mg/l	9 %	Single value · C-Linarolo

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (51 — most recent value per parameter)

Chemical parameters (33)

Chemical parameters – C-Linarolo
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	< 0,1 µg/L below limit of quantification	3 µg/l	< 3 % *	Single value · C-Linarolo
2,6-Dichlorobenzamide (BAM)	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Antimony	< 1 µg/L Sb below limit of quantification	10 µg/l	< 10 % *	Single value · C-Linarolo
Arsenic	8 µg/L As	10 µg/l	80 %	Single value · C-Linarolo
Atrazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Bentazone	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Benzene	< 0,1 µg/L below limit of quantification	1 µg/l	< 10 % *	Single value · C-Linarolo
Bromodichloromethane	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Cadmium	< 0,5 µg/L Cd below limit of quantification	5 µg/l	< 10 % *	Single value · C-Linarolo
Chromium	< 1 µg/L Cr below limit of quantification	50 µg/l	< 2 % *	Single value · C-Linarolo
Copper	< 0,1 mg/L Cu below limit of quantification	2 mg/l	< 5 % *	Single value · C-Linarolo
Desethylatrazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Desethylterbuthylazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Dibromochloromethane	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Fluoride	< 0,1 mg/L F below limit of quantification	1.5 mg/l	< 7 % *	Single value · C-Linarolo
Lead	< 1 µg/L Pb below limit of quantification	10 µg/l	< 10 % *	Single value · C-Linarolo
Metolachlor	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Molinate	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Nickel	2 µg/L Ni	20 µg/l	10 %	Single value · C-Linarolo
Nitrate	< 1,5 mg/L NO3 below limit of quantification	50 mg/l	< 3 % *	Single value · C-Linarolo
Nitrite	< 0,05 mg/L NO2 below limit of quantification	0.5 mg/l	< 10 % *	Single value · C-Linarolo
Pesticides — Total	< 0,02 µg/L below limit of quantification	0.5 µg/l	< 4 % *	Single value · C-Linarolo
Propazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Simazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Terbuthylazine	< 0,02 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Tetrachloroethene	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Tetrachloroethene and Trichloroethene (sum)	< 1 µg/L below limit of quantification	10 µg/l	< 10 % *	Single value · C-Linarolo
Tribromomethane (bromoform)	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Trichloroethene	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Trichloromethane (chloroform)	< 0,1 µg/L below limit of quantification	—	—	Single value · C-Linarolo
Trihalomethanes — Total	< 1 µg/L below limit of quantification	30 µg/l	< 3 % *	Single value · C-Linarolo
Uranium	< 1 µg/L U below limit of quantification	30 µg/l	< 3 % *	Single value · C-Linarolo
Vinyl chloride	< 0,1 µg/L below limit of quantification	0.5 µg/l	< 20 % *	Single value · C-Linarolo

Indicator parameters (9)

Indicator parameters – C-Linarolo
Parameter	Value	Parametric value	Share of the parametric value	Reference
Ammonium	< 0,1 mg/L NH4 below limit of quantification	0.5 mg/l	< 20 % *	Single value · C-Linarolo
Chloride	4 mg/L Cl	250 mg/l	2 %	Single value · C-Linarolo
Conductivity (25 °C)	231 µS/cm	2,500 µS/cm	—	Single value · C-Linarolo
Iron	< 5 µg/L Fe below limit of quantification	0.2 mg/l	< 3 % *	Single value · C-Linarolo
Manganese	< 5 µg/L Mn below limit of quantification	50 µg/l	< 10 % *	Single value · C-Linarolo
pH	8,0 unità pH	6,5–9,5	—	Single value · C-Linarolo
Sodium	18 mg/L Na	200 mg/l	9 %	Single value · C-Linarolo
Sulphate	< 1,5 mg/L SO4 below limit of quantification	250 mg/l	< 0.6 % *	Single value · C-Linarolo
Total organic carbon (TOC)	0,62 mg/L C	senza variazioni anomale	—	Single value · C-Linarolo

Further parameters (9)

Further parameters – C-Linarolo
Parameter	Value	Parametric value	Share of the parametric value	Reference
Bromide	< 0,05 mg/L Br below limit of quantification	—	—	Single value · C-Linarolo
Calcium	26 mg/L Ca	—	—	Single value · C-Linarolo
Dry residue	143 mg/L	—	—	Single value · C-Linarolo
Magnesium	6,2 mg/L Mg	—	—	Single value · C-Linarolo
Phosphate	0,20 mg/L P2O5	—	—	Single value · C-Linarolo
Potassium	0,82 mg/L K	—	—	Single value · C-Linarolo
Total hardness	9 °F	—	—	Single value · C-Linarolo
Vanadium	< 1 µg/L V below limit of quantification	0.14 mg/l	< 0.7 % *	Single value · C-Linarolo
Zinc	< 5 µg/L Zn below limit of quantification	—	—	Single value · C-Linarolo

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.paviaacque.it/wp-content/uploads/2024/11/2024.05.20_PV_Borgarello.pdf · 27/05/2024 · Campionamento 20/05/2024 - Analisi 21/05/2024-27/05/2024 · retrieved on 08/07/2026

Linarolo (serbatoio) Rapporto 2400139-012

Pavia Acque

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Linarolo (serbatoio) Rapporto 2400139-012
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 UFC/100 mL	0/100 ml	—	Single value · Linarolo (serbatoio) - Rapporto 2400139-012

Show all recorded parameters (4 — most recent value per parameter)

Microbiology (2)

Microbiology – Linarolo (serbatoio) Rapporto 2400139-012
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 UFC/100 mL	0/100 ml	—	Single value · Linarolo (serbatoio) - Rapporto 2400139-012
Intestinal enterococci	0 UFC/100 mL	0/100 ml	—	Single value · Linarolo (serbatoio) - Rapporto 2400139-012

Indicator parameters (2)

Indicator parameters – Linarolo (serbatoio) Rapporto 2400139-012
Parameter	Value	Parametric value	Share of the parametric value	Reference
Coliform bacteria	0 UFC/100 mL	0/100 ml	—	Single value · Linarolo (serbatoio) - Rapporto 2400139-012
Colony count 22 °C	<1 UFC/1 mL below limit of quantification	senza variazioni anomale	—	Single value · Linarolo (serbatoio) - Rapporto 2400139-012

Source: https://www.paviaacque.it/wp-content/uploads/2024/06/2024.03.18_ASM-PV_San-Genesio-ed-Uniti.pdf · 22-mar-24 · 18-mar-24 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).