Skip to content
maunawai.info

Italy · Comune

Drinking water in Gravina di Catania

One supply zone, published by SIDRA S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Comune di Gravina di Catania

SIDRA S.p.A.
Key values Comune di Gravina di Catania
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 UFC 0/100 ml Maximum · Comune di Gravina di Catania
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (2)

Microbiology – Comune di Gravina di Catania
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 UFC 0/100 ml Maximum · Comune di Gravina di Catania
Intestinal enterococci 0 UFC 0/100 ml Maximum · Comune di Gravina di Catania

Indicator parameters (5)

Indicator parameters – Comune di Gravina di Catania
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 UFC 0/100 ml Maximum · Comune di Gravina di Catania
Conductivity (25 °C) 888 µScm a 20°C 2,500 µS/cm Maximum · Comune di Gravina di Catania
pH 7.42 unità di pH 6,5–9,5 Maximum · Comune di Gravina di Catania
Temperature 18.9 °C Maximum · Comune di Gravina di Catania
Turbidity 2.05 NTU accettabile per i consumatori, senza variazioni anomale Maximum · Comune di Gravina di Catania

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://sidraspa.it/area-comunicazione/analisi-dell-acqua/ · Rilevazione 06/07/2026 · Prelievi dal 06.07.2026 al 06.07.2026 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).