Skip to content
maunawai.info

Italy · Comune

Drinking water in Cuasso al Monte

One supply zone, published by ALFA S.r.l.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Comune di Cuasso Al Monte

ALFA S.r.l.
Key values Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,015 µg/l 0.1 µg/l
15 %
Maximum · Comune di Cuasso Al Monte · Source [1]
Nitrate 5 mg/l 50 mg/l
10 %
Median · Comune di Cuasso Al Monte · Source [1]
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Escherichia coli (E. coli) 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Cuasso Al Monte · Source [1]
Sulphate 4 mg/l 250 mg/l
2 %
Median · Comune di Cuasso Al Monte · Source [1]
Sodium 4 mg/l 200 mg/l
2 %
Median · Comune di Cuasso Al Monte · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (59 — most recent value per parameter)

Microbiology (2)

Microbiology – Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Cuasso Al Monte · Source [1]
Intestinal enterococci 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Cuasso Al Monte · Source [1]

Chemical parameters (32)

Chemical parameters – Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,9 µg/l
below limit of quantification
3 µg/l
< 30 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Alachlor < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Antimony < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Arsenic 8 µg/l 10 µg/l
80 %
Median · Comune di Cuasso Al Monte · Source [1]
Atrazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Bentazone < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Benzene < 0,3 µg/l
below limit of quantification
1 µg/l
< 30 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Boron < 0,3 mg/l
below limit of quantification
1.5 mg/l
< 20 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Bromodichloromethane 1 µg/l Median · Comune di Cuasso Al Monte · Source [1]
Cadmium < 1,0 µg/l
below limit of quantification
5 µg/l
< 20 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Chlorate 0,23 mg/l 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median · Comune di Cuasso Al Monte · Source [2]
Chlorite < 0,05 mg/l
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Maximum · Comune di Cuasso Al Monte · Source [2]
Chromium < 5 µg/l
below limit of quantification
50 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Copper < 0,2 mg/l
below limit of quantification
2 mg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Dibromochloromethane 1 µg/l Median · Comune di Cuasso Al Monte · Source [2]
Fluoride 0,1 mg/l 1.5 mg/l
7 %
Median · Comune di Cuasso Al Monte · Source [1]
Haloacetic acids (HAA) 6 ug/l 60 µg/l
10 %
Median · Comune di Cuasso Al Monte · Source [3]
Lead < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Molinate < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Nickel < 2 µg/l
below limit of quantification
20 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Nitrate 5 mg/l 50 mg/l
10 %
Median · Comune di Cuasso Al Monte · Source [1]
Nitrite < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Propazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Selenium < 1 µg/l
below limit of quantification
20 µg/l
< 5 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Simazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Terbuthylazine < 0,01 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Tetrachloroethene < 1 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Tetrachloroethene and Trichloroethene (sum) < 1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Maximum · Comune di Cuasso Al Monte · Source [3]
Tribromomethane (bromoform) < 1 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Trichloroethene < 1 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Trichloromethane (chloroform) 2 µg/l Median · Comune di Cuasso Al Monte · Source [1]
Trihalomethanes — Total 3 µg/l 30 µg/l
10 %
Median · Comune di Cuasso Al Monte · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (4)

PFAS – Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
HFPO-DA (GenX) < 0,010 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Perfluorodecane sulfonic acid (PFDS) < 0,010 µg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Sum of PFAS 0,015 µg/l 0.1 µg/l
15 %
Maximum · Comune di Cuasso Al Monte · Source [1]
Trifluoroacetic acid (TFA) 1 µg/l 10 µg/l
10 %
Median · Comune di Cuasso Al Monte · Source [3]

Indicator parameters (13)

Indicator parameters – Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 10 µg/l 0.2 mg/l
5 %
Median · Comune di Cuasso Al Monte · Source [1]
Ammonium < 0,13 mg/l
below limit of quantification
0.5 mg/l
< 26 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Chloride 4 mg/l 250 mg/l
2 %
Median · Comune di Cuasso Al Monte · Source [1]
Clostridium perfringens (including spores) 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Cuasso Al Monte · Source [1]
Coliform bacteria 0 UFC/100ml 0/100 ml Maximum · Median 0 · Comune di Cuasso Al Monte · Source [1]
Colony count 22 °C 0 UFC/1ml senza variazioni anomale Median · Comune di Cuasso Al Monte · Source [1]
Iron 43 µg/l 0.2 mg/l
21 %
Median · Comune di Cuasso Al Monte · Source [1]
Manganese 7 µg/l 50 µg/l
14 %
Median · Comune di Cuasso Al Monte · Source [1]
pH 6,6 pH_unit 6,5–9,5 Median · Comune di Cuasso Al Monte · Source [1]
Sodium 4 mg/l 200 mg/l
2 %
Median · Comune di Cuasso Al Monte · Source [1]
Sulphate 4 mg/l 250 mg/l
2 %
Median · Comune di Cuasso Al Monte · Source [1]
Total organic carbon (TOC) < 0,3 mg/l
below limit of quantification
senza variazioni anomale Maximum · Comune di Cuasso Al Monte · Source [1]
Turbidity 0,43 NTU accettabile per i consumatori, senza variazioni anomale Median · Comune di Cuasso Al Monte · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Comune di Cuasso Al Monte
Parameter Value Parametric value Share of the parametric value Reference
Barium < 2 mg/l
below limit of quantification
Maximum · Comune di Cuasso Al Monte · Source [1]
Calcium 8 mg/l Median · Comune di Cuasso Al Monte · Source [1]
Dry residue 70 mg/l Median · Comune di Cuasso Al Monte · Source [1]
Magnesium 3 mg/l Median · Comune di Cuasso Al Monte · Source [1]
Potassium 2 mg/l Median · Comune di Cuasso Al Monte · Source [1]
Total hardness 3,2 ° f Median · Comune di Cuasso Al Monte · Source [1]
Vanadium < 10 µg/l
below limit of quantification
0.14 mg/l
< 7 % *
Maximum · Comune di Cuasso Al Monte · Source [1]
Zinc 8 µg/l Median · Comune di Cuasso Al Monte · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Sources: [1] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/Dati%20I%20e%20II%20Trimestre%202025_RETE.xlsx · I Semestre 2025_RETE_Alfa · Campionamenti dal 12.02.2025 al 23.06.2025 · retrieved on 08/07/2026 [2] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/III%20Trimestre.xlsx · III Trimestre 2025_RETE_Alfa · Campionamenti dal 02.07.2025 al 25.09.2025 · retrieved on 08/07/2026 [3] https://www.alfavarese.it/sites/default/files/public%3A//report_acqua/IV%20Trimestre.xlsx · IV Trimestre 2025_RETE_Alfa · Campionamenti dal 01.10.2025 al 27.11.2025 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).