Skip to content
maunawai.info

Italy · Comune

Drinking water in Civitella San Paolo

3 supply zones, published by ACEA ATO 2 S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

ZONA 1 MONTINALLO

ACEA ATO 2 S.p.A.
Water hardness
34.7 °dH
Key values ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 2,28 mg/L NO3 50 mg/l
5 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 131,5 mg/L SO4 250 mg/l
53 %
Median
Sodium 58,2 mg/L Na 200 mg/l
29 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 1,10 µg/L As 10 µg/l
11 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,504 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,004 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,26 mg/L 1.5 mg/l
17 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 2,28 mg/L NO3 50 mg/l
5 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 1,04 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 3,7 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 64,8 mg/L Cl 250 mg/l
26 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 1315 µS/cm 2,500 µS/cm Median
Iron 20,4 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,00 pH 6,5–9,5 Median
Sodium 58,2 mg/L Na 200 mg/l
29 %
Median
Sulphate 131,5 mg/L SO4 250 mg/l
53 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 16,0 °C Median
Total organic carbon (TOC) 0,30 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,18 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 1 MONTINALLO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 510 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide µg/L Br
not determined
Median
Calcium 207,00 mg/L Ca Median
Dry residue 997 mg/L Median
Hydrogen carbonate 583 mg/L HCO3 Median
Magnesium 44,40 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 2,48 mg/L K Median
Silicate / silicic acid 30,1 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 62,0 °F Median
Vanadium <1,0 µg/L V
below limit of quantification
0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 2 MICIANO

ACEA ATO 2 S.p.A.
Water hardness
45.6 °dH
Key values ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 0,50 mg/L NO3 50 mg/l
1 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 216 mg/L SO4 250 mg/l
86 %
Median
Sodium 82,3 mg/L Na 200 mg/l
41 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 5,00 µg/L As 10 µg/l
50 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,244 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper <0,001 mg/L Cu
below limit of quantification
2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,46 mg/L 1.5 mg/l
31 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 0,50 mg/L NO3 50 mg/l
1 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 2,10 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 12,5 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 116,0 mg/L Cl 250 mg/l
46 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 1594 µS/cm 2,500 µS/cm Median
Iron 44,2 µg/L Fe 0.2 mg/l Median
Manganese 1,10 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,10 pH 6,5–9,5 Median
Sodium 82,3 mg/L Na 200 mg/l
41 %
Median
Sulphate 216 mg/L SO4 250 mg/l
86 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 15,0 °C Median
Total organic carbon (TOC) 0,36 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,22 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 2 MICIANO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 564 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide 50 µg/L Br Median
Calcium 230,00 mg/L Ca Median
Dry residue 1208 mg/L Median
Hydrogen carbonate 688 mg/L HCO3 Median
Magnesium 58,10 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 5,22 mg/L K Median
Silicate / silicic acid 38,7 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 81,4 °F Median
Vanadium <1,0 µg/L V
below limit of quantification
0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Zona 3 Peschiera

ACEA ATO 2 S.p.A.
Water hardness
20.4 °dH
Key values Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median
Nitrate 2,29 mg/L NO3 50 mg/l
5 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 11,5 mg/L SO4 250 mg/l
5 %
Median
Sodium 2,9 mg/L Na 200 mg/l
1 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 1,00 µg/L As 10 µg/l
10 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,021 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,001 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,10 mg/L 1.5 mg/l
7 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 2,29 mg/L NO3 50 mg/l
5 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 1,00 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 1,0 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 5,4 mg/L Cl 250 mg/l
2 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 609 µS/cm 2,500 µS/cm Median
Iron 7,4 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,40 pH 6,5–9,5 Median
Sodium 2,9 mg/L Na 200 mg/l
1 %
Median
Sulphate 11,5 mg/L SO4 250 mg/l
5 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 13,0 °C Median
Total organic carbon (TOC) 0,45 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,16 mg/L Cl2 Median

Further parameters (13)

Further parameters – Zona 3 Peschiera
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 367 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 111,50 mg/L Ca Median
Dry residue 435,5 mg/L Median
Hydrogen carbonate 448 mg/L HCO3 Median
Magnesium 20,95 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 1,08 mg/L K Median
Silicate / silicic acid 5,4 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 36,5 °F Median
Vanadium <1,0 µg/L V
below limit of quantification
0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).