Italy · Comune

Drinking water in Capizzone

One supply zone, published by Uniacque S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Comune di Capizzone Punto rete Municipio

Uniacque S.p.A.

Water hardness

8.4 °dH

Key values Comune di Capizzone Punto rete Municipio
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	7 mg/l	50 mg/l	14 %	Single value · Comune di Capizzone - Punto rete Municipio
Sulphate	4 mg/l	250 mg/l	2 %	Single value · Comune di Capizzone - Punto rete Municipio
Sodium	0.8 mg/l	200 mg/l	0.4 %	Single value · Comune di Capizzone - Punto rete Municipio

Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Comune di Capizzone Punto rete Municipio
Parameter	Value	Parametric value	Share of the parametric value	Reference
Fluoride	0.07 mg/l	1.5 mg/l	5 %	Single value · Comune di Capizzone - Punto rete Municipio
Nitrate	7 mg/l	50 mg/l	14 %	Single value · Comune di Capizzone - Punto rete Municipio

Indicator parameters (4)

Indicator parameters – Comune di Capizzone Punto rete Municipio
Parameter	Value	Parametric value	Share of the parametric value	Reference
Conductivity (25 °C)	243 µS/cm	2,500 µS/cm	—	Single value · Comune di Capizzone - Punto rete Municipio
pH	8.1 Unita' pH	6,5–9,5	—	Single value · Comune di Capizzone - Punto rete Municipio
Sodium	0.8 mg/l	200 mg/l	0.4 %	Single value · Comune di Capizzone - Punto rete Municipio
Sulphate	4 mg/l	250 mg/l	2 %	Single value · Comune di Capizzone - Punto rete Municipio

Further parameters (5)

Further parameters – Comune di Capizzone Punto rete Municipio
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	47 mg/l	—	—	Single value · Comune di Capizzone - Punto rete Municipio
Dry residue	170 mg/l	—	—	Single value · Comune di Capizzone - Punto rete Municipio
Hydrogen carbonate	159 mg/l	—	—	Single value · Comune di Capizzone - Punto rete Municipio
Magnesium	8 mg/l	—	—	Single value · Comune di Capizzone - Punto rete Municipio
Total hardness	15 °F	—	—	Single value · Comune di Capizzone - Punto rete Municipio

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.uniacque.bg.it/qualita-dellacqua/i-parametri-del-tuo-comune/?comune=Capizzone%3BMunicipio · 30/06/2026 · 30/06/2026 · retrieved on 12/08/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).