Skip to content
maunawai.info

Italy · Comune

Drinking water in Bracciano

6 supply zones, published by ACEA ATO 2 S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

ZONA 1 FIORA

ACEA ATO 2 S.p.A.
Water hardness
6.6 °dH
Key values ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 15,90 mg/L NO3 50 mg/l
32 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 8,03 mg/L SO4 250 mg/l
3 %
Median
Sodium 24,1 mg/L Na 200 mg/l
12 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 8,75 µg/L As 10 µg/l
88 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,089 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 1,06 mg/L 1.5 mg/l
71 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 15,90 mg/L NO3 50 mg/l
32 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
 30 µg/l
< 3 % *
Median
Uranium 11,70 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 1,7 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 17,8 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 383 µS/cm 2,500 µS/cm — Median
Iron <5,0 µg/L Fe
below limit of quantification
 0.2 mg/l — Median
Manganese <0,2 µg/L Mn
below limit of quantification
 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 6,95 pH 6,5–9,5 — Median
Sodium 24,1 mg/L Na 200 mg/l
12 %
Median
Sulphate 8,03 mg/L SO4 250 mg/l
3 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 14,0 °C — — Median
Total organic carbon (TOC) 0,42 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – ZONA 1 FIORA
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 165 mg/L CaCO3 — — Median
Beryllium <0,2 µg/L Be
below limit of quantification
 — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 30,70 mg/L Ca — — Median
Dry residue 273,5 mg/L — — Median
Hydrogen carbonate 201 mg/L HCO3 — — Median
Magnesium 9,93 mg/L Mg — — Median
Phosphate 77 µg/L P2O5 — — Median
Potassium 29,60 mg/L K — — Median
Silicate / silicic acid 37,0 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 11,7 °F — — Median
Vanadium 11,90 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_1_fiora.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

Zona 2 Cisterna

ACEA ATO 2 S.p.A.
Water hardness
7.5 °dH
Key values Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 31,30 mg/L NO3 50 mg/l
63 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 15,6 mg/L SO4 250 mg/l
6 %
Median
Sodium 21,0 mg/L Na 200 mg/l
11 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 7,40 µg/L As 10 µg/l
74 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,052 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 0,88 mg/L 1.5 mg/l
59 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 31,30 mg/L NO3 50 mg/l
63 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total 0 µg/L 30 µg/l
0 %
Median
Uranium 3,20 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 2,7 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 23,1 mg/L Cl 250 mg/l
9 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 414 µS/cm 2,500 µS/cm — Median
Iron 5,0 µg/L Fe 0.2 mg/l — Median
Manganese 0,20 µg/L Mn 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 6,80 pH 6,5–9,5 — Median
Sodium 21,0 mg/L Na 200 mg/l
11 %
Median
Sulphate 15,6 mg/L SO4 250 mg/l
6 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 14,0 °C — — Median
Total organic carbon (TOC) 0,60 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,19 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – Zona 2 Cisterna
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 150 mg/L CaCO3 — — Median
Beryllium 0,50 µg/L Be — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 32,55 mg/L Ca — — Median
Dry residue 295,5 mg/L — — Median
Hydrogen carbonate 184 mg/L HCO3 — — Median
Magnesium 12,85 mg/L Mg — — Median
Phosphate 420 µg/L P2O5 — — Median
Potassium 28,40 mg/L K — — Median
Silicate / silicic acid 83,4 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 13,4 °F — — Median
Vanadium 21,10 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_2_cisterna.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

ZONA 3 LEGA

ACEA ATO 2 S.p.A.
Water hardness
2.6 °dH
Key values ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 7,05 mg/L NO3 50 mg/l
14 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 4,14 mg/L SO4 250 mg/l
2 %
Median
Sodium 14,3 mg/L Na 200 mg/l
7 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 5,30 µg/L As 10 µg/l
53 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,112 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 0,98 mg/L 1.5 mg/l
65 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 7,05 mg/L NO3 50 mg/l
14 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
 30 µg/l
< 3 % *
Median
Uranium 1,20 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 3,4 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 8,9 mg/L Cl 250 mg/l
4 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 199 µS/cm 2,500 µS/cm — Median
Iron <5,0 µg/L Fe
below limit of quantification
 0.2 mg/l — Median
Manganese <0,2 µg/L Mn
below limit of quantification
 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 7,20 pH 6,5–9,5 — Median
Sodium 14,3 mg/L Na 200 mg/l
7 %
Median
Sulphate 4,14 mg/L SO4 250 mg/l
2 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 15,0 °C — — Median
Total organic carbon (TOC) 0,30 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,18 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – ZONA 3 LEGA
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 86 mg/L CaCO3 — — Median
Beryllium <0,2 µg/L Be
below limit of quantification
 — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 11,30 mg/L Ca — — Median
Dry residue 153 mg/L — — Median
Hydrogen carbonate 105 mg/L HCO3 — — Median
Magnesium 4,52 mg/L Mg — — Median
Phosphate 305 µg/L P2O5 — — Median
Potassium 20,50 mg/L K — — Median
Silicate / silicic acid 75,1 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 4,7 °F — — Median
Vanadium 1,40 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_3_lega.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

Zona 4 Pero

ACEA ATO 2 S.p.A.
Water hardness
6.3 °dH
Key values Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 15,75 mg/L NO3 50 mg/l
32 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 8,14 mg/L SO4 250 mg/l
3 %
Median
Sodium 21,7 mg/L Na 200 mg/l
11 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 8,05 µg/L As 10 µg/l
81 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,100 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 1,19 mg/L 1.5 mg/l
79 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 15,75 mg/L NO3 50 mg/l
32 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
 30 µg/l
< 3 % *
Median
Uranium 8,90 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 3,0 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 17,5 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 359 µS/cm 2,500 µS/cm — Median
Iron <5,0 µg/L Fe
below limit of quantification
 0.2 mg/l — Median
Manganese <0,2 µg/L Mn
below limit of quantification
 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 7,10 pH 6,5–9,5 — Median
Sodium 21,7 mg/L Na 200 mg/l
11 %
Median
Sulphate 8,14 mg/L SO4 250 mg/l
3 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 16,0 °C — — Median
Total organic carbon (TOC) 0,31 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,22 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – Zona 4 Pero
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 153 mg/L CaCO3 — — Median
Beryllium <0,2 µg/L Be
below limit of quantification
 — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 28,70 mg/L Ca — — Median
Dry residue 257 mg/L — — Median
Hydrogen carbonate 187 mg/L HCO3 — — Median
Magnesium 9,58 mg/L Mg — — Median
Phosphate 152 µg/L P2O5 — — Median
Potassium 27,30 mg/L K — — Median
Silicate / silicic acid 52,1 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 11,2 °F — — Median
Vanadium 8,12 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_4_pero.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

ZONA 5 CAMPO SPORTIVO

ACEA ATO 2 S.p.A.
Water hardness
6.2 °dH
Key values ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 16,00 mg/L NO3 50 mg/l
32 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 8,07 mg/L SO4 250 mg/l
3 %
Median
Sodium 21,9 mg/L Na 200 mg/l
11 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 6,90 µg/L As 10 µg/l
69 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,092 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 1,02 mg/L 1.5 mg/l
68 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 16,00 mg/L NO3 50 mg/l
32 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
 30 µg/l
< 3 % *
Median
Uranium 11,43 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 2,7 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 17,6 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 358 µS/cm 2,500 µS/cm — Median
Iron <5,0 µg/L Fe
below limit of quantification
 0.2 mg/l — Median
Manganese <0,2 µg/L Mn
below limit of quantification
 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 7,00 pH 6,5–9,5 — Median
Sodium 21,9 mg/L Na 200 mg/l
11 %
Median
Sulphate 8,07 mg/L SO4 250 mg/l
3 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 13,0 °C — — Median
Total organic carbon (TOC) 0,28 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,06 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – ZONA 5 CAMPO SPORTIVO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 152 mg/L CaCO3 — — Median
Beryllium <0,2 µg/L Be
below limit of quantification
 — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 28,60 mg/L Ca — — Median
Dry residue 256 mg/L — — Median
Hydrogen carbonate 185 mg/L HCO3 — — Median
Magnesium 9,64 mg/L Mg — — Median
Phosphate 105 µg/L P2O5 — — Median
Potassium 27,40 mg/L K — — Median
Silicate / silicic acid 40,4 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 11,1 °F — — Median
Vanadium 13,83 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_5_campo_sportivo.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

ZONA 6 RINASCENTE

ACEA ATO 2 S.p.A.
Water hardness
5.8 °dH
Key values ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median
Nitrate 25,50 mg/L NO3 50 mg/l
51 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Sulphate 8,155 mg/L SO4 250 mg/l
3 %
Median
Sodium 15,3 mg/L Na 200 mg/l
8 %
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml — Median
Intestinal enterococci Conforme N/100 mL 0/100 ml — Median

Chemical parameters (28)

Chemical parameters – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
 3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
 0.1 µg/l
< 30 % *
Median
Antimony <1,00 µg/L Sb
below limit of quantification
 10 µg/l — Median
Arsenic 11,00 µg/L As 10 µg/l
110 % Mean above the parametric value
Median
Bisphenol A <0,25 µg/L
below limit of quantification
 2.5 µg/l
< 10 % *
Median
Boron 0,090 mg/L B 1.5 mg/l — Median
Cadmium <0,2 µg/L Cd
below limit of quantification
 5 µg/l — Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
 0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid — Median
Chromium <5,0 µg/L Cr
below limit of quantification
 25 µg/l — Median
Copper <0,001 mg/L Cu
below limit of quantification
 2 mg/l — Median
Cyanide <10 µg/L CN
below limit of quantification
 50 µg/l — Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
 0.1 µg/l
< 50 % *
Median
Fluoride 1,08 mg/L 1.5 mg/l
72 %
Median
Haloacetic acids (HAA) - µg/L
not determined
 60 µg/l — Median
Lead <0,2 µg/L Pb
below limit of quantification
 10 µg/l — Median
Mercury <0,2 µg/L Hg
below limit of quantification
 1 µg/l — Median
Nickel <2,0 µg/L Ni
below limit of quantification
 20 µg/l — Median
Nitrate 25,50 mg/L NO3 50 mg/l
51 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
 0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
 0.5 µg/l — Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
 0.1 µg/l — Median
Selenium <1,0 µg/L Se
below limit of quantification
 20 µg/l — Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trichloroethene <1,0 µg/L
below limit of quantification
 — — Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
 30 µg/l
< 3 % *
Median
Uranium 11,31 µg/L U 30 µg/l — Median
Vinyl chloride <0,1 µg/L
below limit of quantification
 0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

PFAS (1)

PFAS – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,10 µg/L
below limit of quantification
 0.1 µg/l
< 100 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 1,8 µg/L Al 0.2 mg/l — Median
Ammonium <0,1 mg/L NH4
below limit of quantification
 0.5 mg/l
< 20 % *
Median
Chloride 19,1 mg/L Cl 250 mg/l
8 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml — Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale — Median
Conductivity (25 °C) 320 µS/cm 2,500 µS/cm — Median
Iron <5,0 µg/L Fe
below limit of quantification
 0.2 mg/l — Median
Manganese <0,2 µg/L Mn
below limit of quantification
 50 µg/l — Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale — Median
pH 6,90 pH 6,5–9,5 — Median
Sodium 15,3 mg/L Na 200 mg/l
8 %
Median
Sulphate 8,155 mg/L SO4 250 mg/l
3 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale — Median
Temperature 14,5 °C — — Median
Total organic carbon (TOC) 0,25 mg/L C senza variazioni anomale — Median
Turbidity <0,5 NTU
below limit of quantification
 accettabile per i consumatori, senza variazioni anomale — Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 — — Median

Further parameters (13)

Further parameters – ZONA 6 RINASCENTE
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 116 mg/L CaCO3 — — Median
Beryllium <0,2 µg/L Be
below limit of quantification
 — — Median
Bromide <50 µg/L Br
below limit of quantification
 — — Median
Calcium 25,45 mg/L Ca — — Median
Dry residue 243 mg/L — — Median
Hydrogen carbonate 142 mg/L HCO3 — — Median
Magnesium 9,83 mg/L Mg — — Median
Phosphate 86 µg/L P2O5 — — Median
Potassium 23,30 mg/L K — — Median
Silicate / silicic acid 39,5 mg/L SiO2 — — Median
Thallium <0,2 µg/L Tl
below limit of quantification
 — — Median
Total hardness 10,3 °F — — Median
Vanadium 12,75 µg/L V 0.14 mg/l — Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.aceaato2.a-acqua.it/content/dam/acea-ato2/pdf/it/mappe-qualita/bracciano_zona_6_rinascente.pdf · luglio 2026 · luglio 2026 · retrieved on 08/07/2026

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).