Italy · Comune
Drinking water in Bornasco
2 supply zones, published by Pavia Acque. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).
Bornasco (vasca)
Pavia AcqueNo date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 UFC/100 mL | 0/100 ml | — | Single value · Bornasco (vasca) |
Show all recorded parameters (4 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 UFC/100 mL | 0/100 ml | — | Single value · Bornasco (vasca) |
| Intestinal enterococci | 0 UFC/100 mL | 0/100 ml | — | Single value · Bornasco (vasca) |
Indicator parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 UFC/100 mL | 0/100 ml | — | Single value · Bornasco (vasca) |
| Colony count 22 °C | < 1 UFC/1 mL below limit of quantification | senza variazioni anomale | — | Single value · Bornasco (vasca) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
C-Bornasco (RETE BORNASCO)
Pavia AcqueThese values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 24/06/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | < 1,5 mg/L NO3 below limit of quantification | 50 mg/l | < 3 % * | Single value · C-Bornasco (RETE BORNASCO) |
| Sulphate | 6 mg/L SO4 | 250 mg/l | 2 % | Single value · C-Bornasco (RETE BORNASCO) |
| Sodium | 7 mg/L Na | 200 mg/l | 3 % | Single value · C-Bornasco (RETE BORNASCO) |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (18 — most recent value per parameter)
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Arsenic | 2 µg/L As | 10 µg/l | 20 % | Single value · C-Bornasco (RETE BORNASCO) |
| Fluoride | < 0,1 mg/L F below limit of quantification | 1.5 mg/l | < 7 % * | Single value · C-Bornasco (RETE BORNASCO) |
| Nitrate | < 1,5 mg/L NO3 below limit of quantification | 50 mg/l | < 3 % * | Single value · C-Bornasco (RETE BORNASCO) |
| Nitrite | < 0,05 mg/L NO2 below limit of quantification | 0.5 mg/l | < 10 % * | Single value · C-Bornasco (RETE BORNASCO) |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | < 0,1 mg/L NH4 below limit of quantification | 0.5 mg/l | < 20 % * | Single value · C-Bornasco (RETE BORNASCO) |
| Chloride | 2 mg/L Cl | 250 mg/l | 0.8 % | Single value · C-Bornasco (RETE BORNASCO) |
| Conductivity (25 °C) | 348 µS/cm | 2,500 µS/cm | — | Single value · C-Bornasco (RETE BORNASCO) |
| pH | 7,6 unità pH | 6,5–9,5 | — | Single value · C-Bornasco (RETE BORNASCO) |
| Sodium | 7 mg/L Na | 200 mg/l | 3 % | Single value · C-Bornasco (RETE BORNASCO) |
| Sulphate | 6 mg/L SO4 | 250 mg/l | 2 % | Single value · C-Bornasco (RETE BORNASCO) |
| Total organic carbon (TOC) | < 0,3 mg/L C below limit of quantification | senza variazioni anomale | — | Single value · C-Bornasco (RETE BORNASCO) |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Bromide | < 0,05 mg/L Br below limit of quantification | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Calcium | 53 mg/L Ca | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Dry residue | 216 mg/L | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Magnesium | 12,2 mg/L Mg | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Phosphate | < 0,15 mg/L P2O5 below limit of quantification | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Potassium | 1,7 mg/L K | — | — | Single value · C-Bornasco (RETE BORNASCO) |
| Total hardness | 18 °F | — | — | Single value · C-Bornasco (RETE BORNASCO) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).