Skip to content
maunawai.info

Italy · Comune

Drinking water in Benevello

One supply zone, published by it-s-i-s-i-srl. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello

it-s-i-s-i-srl

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 18/06/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,7 mg/l 50 mg/l
5 %
Single value
Sulphate 40 mg/l 250 mg/l
16 %
Single value
Show all recorded parameters (16 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0,5 mg/l
below limit of quantification
1.5 mg/l
< 33 % *
Single value
Nitrate 2,7 mg/l 50 mg/l
5 %
Single value
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Chloride 2,7 mg/l 250 mg/l
1 %
Single value
Colour Assente
not detectable
accettabile per i consumatori, senza variazioni anomale Single value
Conductivity (25 °C) 260 µS/cm a 20°C 2,500 µS/cm Single value
Odour Non percettibile
not detectable
accettabile per i consumatori, senza variazioni anomale Single value
pH 8,06 6,5–9,5 Single value
Sulphate 40 mg/l 250 mg/l
16 %
Single value
Taste Non percettibile
not detectable
accettabile per i consumatori, senza variazioni anomale Single value
Turbidity < 0,8 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (2)

Treatment substances – Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine mg/l Cl2
not determined
Single value
Total chlorine mg/l Cl2
not determined
Single value

Further parameters (2)

Further parameters – Rete di distribuzione - Comune di Montelupo Albese, Benevello, Rodello
Parameter Value Parametric value Share of the parametric value Reference
Dry residue mg/l
not determined
Single value
Total hardness °F
not determined
Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).