Skip to content
maunawai.info

Italy · Comune

Drinking water in Anguillara Sabazia

5 supply zones, published by ACEA ATO 2 S.p.A.. The values come from the publications of the Italian water suppliers (gestori), which D.Lgs. 18/2023 requires of them from 12 January 2026. Italian parametric values apply: trihalomethanes 30 instead of 50 µg/l, chromium 25 µg/l, uranium 30 instead of 10 µg/l; for hardness there is no maximum value, it is given in French degrees (°F).

ZONA 1 MONTANO

ACEA ATO 2 S.p.A.
Water hardness
13.5 °dH
Key values ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median
Nitrate 15,20 mg/L NO3 50 mg/l
30 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 16,9 mg/L SO4 250 mg/l
7 %
Median
Sodium 18,8 mg/L Na 200 mg/l
9 %
Median
Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 9,00 µg/L As 10 µg/l
90 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,135 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,042 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,99 mg/L 1.5 mg/l
66 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 15,20 mg/L NO3 50 mg/l
30 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 2,19 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median

Indicator parameters (16)

Indicator parameters – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 3,5 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 17,9 mg/L Cl 250 mg/l
7 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 551 µS/cm 2,500 µS/cm Median
Iron 8,1 µg/L Fe 0.2 mg/l Median
Manganese 1,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,00 pH 6,5–9,5 Median
Sodium 18,8 mg/L Na 200 mg/l
9 %
Median
Sulphate 16,9 mg/L SO4 250 mg/l
7 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 18,5 °C Median
Total organic carbon (TOC) 0,56 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 1 MONTANO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 271 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 72,90 mg/L Ca Median
Dry residue 394 mg/L Median
Hydrogen carbonate 328 mg/L HCO3 Median
Magnesium 15,65 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 23,15 mg/L K Median
Silicate / silicic acid 53,8 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 24,1 °F Median
Vanadium 14,90 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 2 COLLE BIADARO

ACEA ATO 2 S.p.A.
Water hardness
13.4 °dH
Key values ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median
Nitrate 28,25 mg/L NO3 50 mg/l
56 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 31,2 mg/L SO4 250 mg/l
12 %
Median
Sodium 41,0 mg/L Na 200 mg/l
21 %
Median
Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 6,95 µg/L As 10 µg/l
70 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,272 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,004 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 1,08 mg/L 1.5 mg/l
72 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 28,25 mg/L NO3 50 mg/l
56 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 3,40 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median

Indicator parameters (16)

Indicator parameters – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 5,7 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 61,7 mg/L Cl 250 mg/l
25 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 768 µS/cm 2,500 µS/cm Median
Iron 8,8 µg/L Fe 0.2 mg/l Median
Manganese 0,70 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 6,60 pH 6,5–9,5 Median
Sodium 41,0 mg/L Na 200 mg/l
21 %
Median
Sulphate 31,2 mg/L SO4 250 mg/l
12 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 19,0 °C Median
Total organic carbon (TOC) 0,32 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 2 COLLE BIADARO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 275 mg/L CaCO3 Median
Beryllium 0,40 µg/L Be Median
Bromide µg/L Br
not determined
Median
Calcium 61,90 mg/L Ca Median
Dry residue 549,5 mg/L Median
Hydrogen carbonate 336 mg/L HCO3 Median
Magnesium 20,45 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 63,50 mg/L K Median
Silicate / silicic acid <50 mg/L SiO2
below limit of quantification
Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 23,9 °F Median
Vanadium 1,00 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 3 PONTON DELL'ELCE

ACEA ATO 2 S.p.A.
Water hardness
19.3 °dH
Key values ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median
Nitrate 3,01 mg/L NO3 50 mg/l
6 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 16,95 mg/L SO4 250 mg/l
7 %
Median
Sodium 3,9 mg/L Na 200 mg/l
2 %
Median
Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 1,00 µg/L As 10 µg/l
10 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,021 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,002 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,11 mg/L 1.5 mg/l
7 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 3,01 mg/L NO3 50 mg/l
6 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 1,00 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median

Indicator parameters (16)

Indicator parameters – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 1,0 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 6,5 mg/L Cl 250 mg/l
3 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 582 µS/cm 2,500 µS/cm Median
Iron 6,4 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,50 pH 6,5–9,5 Median
Sodium 3,9 mg/L Na 200 mg/l
2 %
Median
Sulphate 16,95 mg/L SO4 250 mg/l
7 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 16,0 °C Median
Total organic carbon (TOC) 0,30 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,19 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 3 PONTON DELL'ELCE
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 339 mg/L CaCO3 Median
Beryllium <0,2 µg/L Be
below limit of quantification
Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 106,50 mg/L Ca Median
Dry residue 416 mg/L Median
Hydrogen carbonate 413 mg/L HCO3 Median
Magnesium 19,15 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 1,30 mg/L K Median
Silicate / silicic acid 5,4 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 34,5 °F Median
Vanadium 1,00 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 4 COLLE SABAZIO

ACEA ATO 2 S.p.A.
Water hardness
0.4 °dH
Key values ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median
Nitrate 2,15 mg/L NO3 50 mg/l
4 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 0,557 mg/L SO4 250 mg/l
0.2 %
Median
Sodium 3,4 mg/L Na 200 mg/l
2 %
Median
Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 6,15 µg/L As 10 µg/l
62 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,077 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,002 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,39 mg/L 1.5 mg/l
26 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 2,15 mg/L NO3 50 mg/l
4 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 0,55 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median

Indicator parameters (16)

Indicator parameters – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 6,7 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 2,3 mg/L Cl 250 mg/l
0.9 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 43 µS/cm 2,500 µS/cm Median
Iron 5,0 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,40 pH 6,5–9,5 Median
Sodium 3,4 mg/L Na 200 mg/l
2 %
Median
Sulphate 0,557 mg/L SO4 250 mg/l
0.2 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 19,0 °C Median
Total organic carbon (TOC) 0,32 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 4 COLLE SABAZIO
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 21 mg/L CaCO3 Median
Beryllium 0,20 µg/L Be Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 1,94 mg/L Ca Median
Dry residue 58 mg/L Median
Hydrogen carbonate 13 mg/L HCO3 Median
Magnesium 0,54 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 5,46 mg/L K Median
Silicate / silicic acid 23,5 mg/L SiO2 Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 0,7 °F Median
Vanadium 4,00 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

ZONA 5 LE PANTANE

ACEA ATO 2 S.p.A.
Water hardness
1.7 °dH
Key values ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median
Nitrate 10,00 mg/L NO3 50 mg/l
20 %
Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Sulphate 4,68 mg/L SO4 250 mg/l
2 %
Median
Sodium 8,6 mg/L Na 200 mg/l
4 %
Median
Show all recorded parameters (61 — most recent value per parameter)

Microbiology (2)

Microbiology – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) Conforme MPN/100 mL 0/100 ml Median
Intestinal enterococci Conforme N/100 mL 0/100 ml Median

Chemical parameters (28)

Chemical parameters – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,1 µg/L
below limit of quantification
3 µg/l
< 3 % *
Median
Acrylamide <0,03 µg/L
below limit of quantification
0.1 µg/l
< 30 % *
Median
Antimony <1,0 µg/L Sb
below limit of quantification
10 µg/l Median
Arsenic 1,00 µg/L As 10 µg/l
10 %
Median
Bisphenol A <0,25 µg/L
below limit of quantification
2.5 µg/l
< 10 % *
Median
Boron 0,133 mg/L B 1.5 mg/l Median
Cadmium <0,2 µg/L Cd
below limit of quantification
5 µg/l Median
Chlorate <0,05 mg/L ClO3
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chlorite <0,05 mg/L ClO2
below limit of quantification
0,25 — bzw. 0,70 bei Desinfektion mit Chlordioxid Median
Chromium <5,0 µg/L Cr
below limit of quantification
25 µg/l Median
Copper 0,005 mg/L Cu 2 mg/l Median
Cyanide <10 µg/L CN
below limit of quantification
50 µg/l Median
Epichlorohydrin <0,05 µg/L
below limit of quantification
0.1 µg/l
< 50 % *
Median
Fluoride 0,73 mg/L 1.5 mg/l
49 %
Median
Haloacetic acids (HAA) - µg/L
not determined
60 µg/l Median
Lead <0,2 µg/L Pb
below limit of quantification
10 µg/l Median
Mercury <0,2 µg/L Hg
below limit of quantification
1 µg/l Median
Nickel <2,0 µg/L Ni
below limit of quantification
20 µg/l Median
Nitrate 10,00 mg/L NO3 50 mg/l
20 %
Median
Nitrite <0,05 mg/L NO2
below limit of quantification
0.5 mg/l
< 10 % *
Median
Pesticides — Total - µg/L
not determined
0.5 µg/l Median
Polycyclic aromatic hydrocarbons - µg/L
not determined
0.1 µg/l Median
Selenium <1,0 µg/L Se
below limit of quantification
20 µg/l Median
Tetrachloroethene <1,0 µg/L
below limit of quantification
Median
Trichloroethene <1,0 µg/L
below limit of quantification
Median
Trihalomethanes — Total <1,0 µg/L
below limit of quantification
30 µg/l
< 3 % *
Median
Uranium 0,65 µg/L U 30 µg/l Median
Vinyl chloride <0,1 µg/L
below limit of quantification
0.5 µg/l
< 20 % *
Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS - µg/L
not determined
0.1 µg/l Median

Indicator parameters (16)

Indicator parameters – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 23,9 µg/L Al 0.2 mg/l Median
Ammonium <0,1 mg/L NH4
below limit of quantification
0.5 mg/l
< 20 % *
Median
Chloride 5,7 mg/L Cl 250 mg/l
2 %
Median
Coliform bacteria Conforme MPN/100 mL 0/100 ml Median
Colour Incolore Scala Pt/C accettabile per i consumatori, senza variazioni anomale Median
Conductivity (25 °C) 117 µS/cm 2,500 µS/cm Median
Iron 5,0 µg/L Fe 0.2 mg/l Median
Manganese 0,20 µg/L Mn 50 µg/l Median
Odour 0 Diluiz. 25 accettabile per i consumatori, senza variazioni anomale Median
pH 7,00 pH 6,5–9,5 Median
Sodium 8,6 mg/L Na 200 mg/l
4 %
Median
Sulphate 4,68 mg/L SO4 250 mg/l
2 %
Median
Taste 0 tasso diluz. accettabile per i consumatori, senza variazioni anomale Median
Temperature 19,0 °C Median
Total organic carbon (TOC) 0,86 mg/L C senza variazioni anomale Median
Turbidity <0,5 NTU
below limit of quantification
accettabile per i consumatori, senza variazioni anomale Median

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Treatment substances (1)

Treatment substances – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Free chlorine 0,20 mg/L Cl2 Median

Further parameters (13)

Further parameters – ZONA 5 LE PANTANE
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 44 mg/L CaCO3 Median
Beryllium 0,45 µg/L Be Median
Bromide <50 µg/L Br
below limit of quantification
Median
Calcium 9,18 mg/L Ca Median
Dry residue 111 mg/L Median
Hydrogen carbonate 54 mg/L HCO3 Median
Magnesium 1,76 mg/L Mg Median
Phosphate <50 µg/L P2O5
below limit of quantification
Median
Potassium 8,48 mg/L K Median
Silicate / silicic acid <50 mg/L SiO2
below limit of quantification
Median
Thallium <0,2 µg/L Tl
below limit of quantification
Median
Total hardness 3,1 °F Median
Vanadium 4,50 µg/L V 0.14 mg/l Median

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Legal basis: Art. 18 D.Lgs. 18/2023 as amended by D.Lgs. 102/2025 (transposition of EU Directive 2020/2184). The values are not official — the publication of the Gestore, to which every row links, remains authoritative. Assignment of the comune: information in the analysis document, resolved against the municipality list of ISTAT (territorial status 01.01.2026, CC BY 4.0).