How hard is the water in Zullwil?

Gemeinde Fehren publishes a total hardness of 25.3 °fH for the supply zone Fehren — that corresponds to 14.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Zullwil?

Gemeinde Fehren publishes a nitrate value of 13.1 mg/l for the supply zone Fehren. The statutory parametric value is 40 mg/l; the measured value represents 33 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.

Who supplies the drinking water in Zullwil?

Gemeinde Fehren. The values shown here come from the supply zone Fehren and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Zullwil

One supply zone, water supplier: Gemeinde Fehren.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Fehren

Gemeinde Fehren

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

14.2 °dH

Hardness range hard

Key values Fehren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	13.1 mg/l	40 mg/l	33 %	Mean · Fehren
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Fehren

Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Fehren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	190 KBE/ml	300 1/ml	—	Mean · Fehren
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Fehren
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Fehren

Chemical parameters (1)

Chemical parameters – Fehren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	13.1 mg/l	40 mg/l	33 %	Mean · Fehren

Further parameters (3)

Further parameters – Fehren
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	94.7 mg/l	—	—	Mean · Fehren
Magnesium	4.1 mg/l	—	—	Mean · Fehren
Total hardness	25.3 °fH	—	—	Mean · Fehren

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1473/gemeinde-fehren/3246/fehren · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 4234

Frequently asked questions about drinking water in Zullwil

How hard is the water in Zullwil?: Gemeinde Fehren publishes a total hardness of 25.3 °fH for the supply zone Fehren — that corresponds to 14.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Zullwil?: Gemeinde Fehren publishes a nitrate value of 13.1 mg/l for the supply zone Fehren. The statutory parametric value is 40 mg/l; the measured value represents 33 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Zullwil?: Gemeinde Fehren. The values shown here come from the supply zone Fehren and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.