Skip to content
maunawai.info

Drinking water in Zirndorf

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 15/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16.5 °dH
Hardness range hard
Key values Alte Veste
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 12,6 mg/l 50 mg/l
25 %
Single value · Alte Veste
Sulphate 31,0 mg/l 250 mg/l
12 %
Single value · Alte Veste
Sodium 11,6 mg/l 200 mg/l
6 %
Single value · Alte Veste
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Alte Veste
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,11 mg/l 1.5 mg/l
7 %
Single value · Alte Veste
Nitrate 12,6 mg/l 50 mg/l
25 %
Single value · Alte Veste

Indicator parameters (7)

Indicator parameters – Alte Veste
Parameter Value Parametric value Share of the parametric value Reference
Chloride 39,6 mg/l 250 mg/l
16 %
Single value · Alte Veste
Conductivity (25 °C) 596 µS/cm 2,790 µS/cm Single value · Alte Veste
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Alte Veste
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value · Alte Veste
pH 7,76 pH 6,5–9,5 Single value · Alte Veste
Sodium 11,6 mg/l 200 mg/l
6 %
Single value · Alte Veste
Sulphate 31,0 mg/l 250 mg/l
12 %
Single value · Alte Veste

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Alte Veste
Parameter Value Parametric value Share of the parametric value Reference
Magnesium 36,0 mg/l Single value · Alte Veste
Oxygen 10,1 mg/l Single value · Alte Veste
Potassium 4,72 mg/l Single value · Alte Veste
Total hardness 16,5 °dH Single value · Alte Veste

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-zirndorf.de/wasser/wasseranalyse.html · Probenahme am 03.07.2025 / Prüfbericht vom 15.07.2025 · retrieved on 11/07/2026

Postcodes in this zone: 90513

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 15/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
21.4 °dH
Hardness range hard
Key values Weitersdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,72 mg/l 50 mg/l
1 %
Single value · Weitersdorf
Sulphate 39,3 mg/l 250 mg/l
16 %
Single value · Weitersdorf
Sodium 12,6 mg/l 200 mg/l
6 %
Single value · Weitersdorf
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Weitersdorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,64 mg/l 1.5 mg/l
43 %
Single value · Weitersdorf
Nitrate 0,72 mg/l 50 mg/l
1 %
Single value · Weitersdorf

Indicator parameters (7)

Indicator parameters – Weitersdorf
Parameter Value Parametric value Share of the parametric value Reference
Chloride 29,8 mg/l 250 mg/l
12 %
Single value · Weitersdorf
Conductivity (25 °C) 745 µS/cm 2,790 µS/cm Single value · Weitersdorf
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Weitersdorf
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value · Weitersdorf
pH 7,67 pH 6,5–9,5 Single value · Weitersdorf
Sodium 12,6 mg/l 200 mg/l
6 %
Single value · Weitersdorf
Sulphate 39,3 mg/l 250 mg/l
16 %
Single value · Weitersdorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Weitersdorf
Parameter Value Parametric value Share of the parametric value Reference
Magnesium 43,7 mg/l Single value · Weitersdorf
Oxygen 9,88 mg/l Single value · Weitersdorf
Potassium 15,9 mg/l Single value · Weitersdorf
Total hardness 21,4 °dH Single value · Weitersdorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-zirndorf.de/wasser/wasseranalyse.html · Probenahme am 03.07.2025 / Prüfbericht vom 15.07.2025 · retrieved on 11/07/2026

Postcodes in this zone: 90513

Frequently asked questions about drinking water in Zirndorf

How hard is the water in Zirndorf?
Stadtwerke Zirndorf GmbH publishes a total hardness of 16.5 °dH for the supply zone Alte Veste (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Zirndorf?
Stadtwerke Zirndorf GmbH publishes a nitrate value of 12,6 mg/l for the supply zone Alte Veste. The statutory parametric value is 50 mg/l; the measured value represents 25 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Zirndorf?
Stadtwerke Zirndorf GmbH. The values shown here come from the supply zone Alte Veste and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.