Skip to content
maunawai.info

Drinking water in Zarpen

One supply zone, water supplier: Stadtwerke Reinfeld (Holstein) - Ver- und Entsorgung - Wasserversorgung.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,46 mg/l 50 mg/l
5 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 2,4 mg/l 250 mg/l
1 %
Single value
Sodium 36,9 mg/l 200 mg/l
18 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (21 — most recent value per parameter)

Microbiology (2)

Microbiology – Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (6)

Chemical parameters – Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Copper 0,008 mg/l 2 mg/l
0.4 %
Single value
Fluoride 0,17 mg/l 1.5 mg/l
11 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Nitrate 2,46 mg/l 50 mg/l
5 %
Single value
Nitrite 0,06 mg/l 0.5 mg/l
12 %
Single value
Uranium < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,23 mg/l 0.5 mg/l
46 %
Single value
Chloride 12,4 mg/l 250 mg/l
5 %
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese 0,026 mg/l 50 µg/l
52 %
Single value
Odour o.B. für den Verbraucher annehmbar Single value
pH 7,40 6,5–9,5 Single value
Sodium 36,9 mg/l 200 mg/l
18 %
Single value
Sulphate 2,4 mg/l 250 mg/l
1 %
Single value
Total organic carbon (TOC) 1,8 mg/l ohne anormale Veränderung Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Calcium 70,3 mg/l Single value
Magnesium 16,0 mg/l Single value
Phosphate < 0,1 mg/l
below limit of quantification
Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.reinfeld.de/media/custom/3145_1127_1.PDF · April 2024 · retrieved on 25/07/2026

Postcodes in this zone: 23619

Frequently asked questions about drinking water in Zarpen

How much nitrate is in the drinking water in Zarpen?
Stadtwerke Reinfeld (Holstein) - Ver- und Entsorgung - Wasserversorgung publishes a nitrate value of 2,46 mg/l for the supply zone Werksausgang. The statutory parametric value is 50 mg/l; the measured value represents 5 % of the parametric value. Basis: Publication by the water supplier, retrieved on 25/07/2026.
Who supplies the drinking water in Zarpen?
Stadtwerke Reinfeld (Holstein) - Ver- und Entsorgung - Wasserversorgung. The values shown here come from the supply zone Werksausgang and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.