Drinking water in Wurmlingen
One supply zone, water supplier: Gemeinde Wurmlingen.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Reinwasser (Langental- u. Spitzwiesenquellen) - Probenahmeort Wurmlingen / HB Faulenrain
Gemeinde WurmlingenAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
16.3 °dH
Hardness range hart
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,8 mg/l | 50 mg/l | 16 % | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 8,2 mg/l | 250 mg/l | 3 % | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (83 — most recent value per parameter)
Chemical parameters (44)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,0005 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Atrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Benzene | < 0,00025 mg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Benzo(a)pyrene | < 0,000001 mg/l below limit of quantification | 10 ng/l | < 10 % * | Single value |
| Benzo(b)fluoranthene | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Bisphenol A | < 0,00001 mg/l below limit of quantification | 2.5 µg/l | < 0.4 % * | Single value |
| Boron | < 0,02 mg/l below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Bromate | < 0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Bromodichloromethane | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Cadmium | < 0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chlorate | < 0,02 mg/l below limit of quantification | 70 µg/l | < 29 % * | Single value |
| Chlorite | < 0,05 mg/l below limit of quantification | 0.2 mg/l | < 25 % * | Single value |
| Chromium | < 0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | < 0,001 mg/l below limit of quantification | 2 mg/l | < < 0.1 % * | Single value |
| Cyanide | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Dibromoacetic acid | < 3,0 µg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Dichloroacetic acid | < 3,0 µg/l below limit of quantification | — | — | Single value |
| Fluoride | < 0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Indeno(1,2,3-cd)pyrene | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metazachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metolachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Monobromoacetic acid | < 3,0 µg/l below limit of quantification | — | — | Single value |
| Monochloroacetic acid | < 3,0 µg/l below limit of quantification | — | — | Single value |
| Nickel | < 0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 7,8 mg/l | 50 mg/l | 16 % | Single value |
| Nitrite | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Pesticides — Total | (n. b.) mg/l not determined | 0.5 µg/l | — | Single value |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Trichloroacetic acid | < 3,0 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | < 0,0005 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | (n. b.) mg/l not determined | 50 µg/l | — | Single value |
| Uranium | 0,0002 mg/l | 10 µg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | < 0,0010 µg/l below limit of quantification | — | — | Single value |
Indicator parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Calcite dissolution capacity | -38 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 3,5 mg/l | 250 mg/l | 1 % | Single value |
| Conductivity (25 °C) | 527 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | < 0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| pH | 7,54 | 6,5–9,5 | — | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
| Sulphate | 8,2 mg/l | 250 mg/l | 3 % | Single value |
| Temperature | 10,6 °C | — | — | Single value |
| Total organic carbon (TOC) | 1,3 mg/l | ohne anormale Veränderung | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorine dioxide | < 0,1 mg/l below limit of quantification | — | — | Single value |
Further parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,7 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | n.u. mmol/l not determined | — | — | Single value |
| Calcium | 112 mg/l | — | — | Single value |
| Carbonate hardness | 2,83 mmol/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Hydrogen carbonate | 345 mg/l | — | — | Single value |
| Magnesium | 2,9 mg/l | — | — | Single value |
| Oxygen | 9,0 mg/l | — | — | Single value |
| Phosphate | < 0,02 mg/l below limit of quantification | — | — | Single value |
| Potassium | 0,4 mg/l | — | — | Single value |
| Saturation index | 0,45 | — | — | Single value |
| Total hardness | 2,91 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://api.wasserportal.info/api/public/qualitaet/trinkwasseranalyse/251b8d06-b04c-46eb-8af2-8443206066be · 13.10.2025 · 22.09.2025 - 02.10.2025 (Prüfzeitraum); Probenahme 22.09.2025 09:24 · retrieved on 27/07/2026
Postcodes in this zone: 78573
Frequently asked questions about drinking water in Wurmlingen
- How hard is the water in Wurmlingen?
- Gemeinde Wurmlingen publishes a total hardness of 2,91 mmol/l for the supply zone Reinwasser (Langental- u. Spitzwiesenquellen) - Probenahmeort Wurmlingen / HB Faulenrain — that corresponds to 16.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 13.10.2025, retrieved on 27/07/2026.
- How much nitrate is in the drinking water in Wurmlingen?
- Gemeinde Wurmlingen publishes a nitrate value of 7,8 mg/l for the supply zone Reinwasser (Langental- u. Spitzwiesenquellen) - Probenahmeort Wurmlingen / HB Faulenrain. The statutory parametric value is 50 mg/l; the measured value represents 16 % of the parametric value. Basis: 13.10.2025, retrieved on 27/07/2026.
- Who supplies the drinking water in Wurmlingen?
- Gemeinde Wurmlingen. The values shown here come from the supply zone Reinwasser (Langental- u. Spitzwiesenquellen) - Probenahmeort Wurmlingen / HB Faulenrain and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.