Drinking water in Winkelhaid
One supply zone, water supplier: ZV Wasserversorgung Gruppe Winkelhaid.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Winkelhaid, Feuerwehrhaus, Geräteraum, WB, ZGA 1230/0574/00716
ZV Wasserversorgung Gruppe WinkelhaidAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 02/06/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
6.7 °dH
Hardness range weich
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 4,9 mg/l | 50 mg/l | 10 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 12 mg/l | 250 mg/l | 5 % | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (115 — most recent value per parameter)
Chemical parameters (77)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,2 µg/l below limit of quantification | 3 µg/l | < 7 % * | Single value |
| 2,4-D | <0,02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,009 mg/l | 10 µg/l | 90 % | Single value |
| Atrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Azoxystrobin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bentazone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0,2 µg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | <0,001 µg/l below limit of quantification | 10 ng/l | < 10 % * | Single value |
| Benzo(b)fluoranthene | <0,002 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,002 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,002 µg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,4 µg/l below limit of quantification | 2.5 µg/l | < 16 % * | Single value |
| Boron | <0,02 mg/l below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Boscalid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Bromoxynil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Carbendazim | <0,02 µg/l below limit of quantification | — | — | Single value |
| Carbetamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chloridazon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chromium | <0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Clopyralid | <0,05 µg/l below limit of quantification | — | — | Single value |
| Copper | 0,006 mg/l | 2 mg/l | 0.3 % | Single value |
| Cyanide | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Single value |
| Desethylatrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | <0,5 µg/l below limit of quantification | — | — | Single value |
| Dicamba | <0,05 µg/l below limit of quantification | — | — | Single value |
| Dichlorprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diflufenican | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimefuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethenamid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethoate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethidimuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethofumesate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Flufenacet | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,11 mg/l | 1.5 mg/l | 7 % | Single value |
| Glyphosate | <0,05 µg/l below limit of quantification | — | — | Single value |
| Imidacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Lenacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| MCPA | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mecoprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0,00003 mg/l below limit of quantification | 1 µg/l | < 3 % * | Single value |
| Metalaxyl | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metamitron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metribuzin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nickel | <0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nicosulfuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nitrate | 4,9 mg/l | 50 mg/l | 10 % | Single value |
| Nitrite | <0,030 mg/l below limit of quantification | 0.5 mg/l | < 6 % * | Single value |
| Pendimethalin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Polycyclic aromatic hydrocarbons | n.n. µg/l not detectable | 0.1 µg/l | — | Single value |
| Propazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propiconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prosulfocarb | <0,02 µg/l below limit of quantification | — | — | Single value |
| Quinmerac | <0,02 µg/l below limit of quantification | — | — | Single value |
| Selenium | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Simazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tebuconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Thiacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Triadimenol | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,5 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,2 µg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,5 µg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | n.n. µg/l not detectable | 50 µg/l | — | Single value |
| Uranium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,002 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,0017 µg/l below limit of quantification | — | — | Single value |
Indicator parameters (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Chloride | 6,5 mg/l | 250 mg/l | 3 % | Single value |
| Colour | farblos Unit not stated in the document | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 251 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 8,1 | 6,5–9,5 | — | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
| Sulphate | 12 mg/l | 250 mg/l | 5 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 15,4 °C | — | — | Single value |
| Total organic carbon (TOC) | 0,71 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | 0,39 FNU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Base capacity to pH 8.2 | <0,10 mmol/l below limit of quantification | — | — | Single value |
| Calcium | 33 mg/l | — | — | Single value |
| Hardness range (WRMG) | weich | — | — | Single value |
| Magnesium | 8,9 mg/l | — | — | Single value |
| Oxygen | 9,8 mg/l | — | — | Single value |
| Phosphate | 0,3 mg/l | — | — | Single value |
| Potassium | 5 mg/l | — | — | Single value |
| Total hardness | 1,2 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.winkelhaid.de/sites/default/files/imce/files/pb_ab2506900-1.pdf · 02.06.2025 · Probenahme 20.05.2025, Prüfzeitraum 20.05.2025 - 02.06.2025 · retrieved on 25/07/2026
Postcodes in this zone: 90610
Frequently asked questions about drinking water in Winkelhaid
- How hard is the water in Winkelhaid?
- ZV Wasserversorgung Gruppe Winkelhaid publishes a total hardness of 1,2 mmol/l for the supply zone Winkelhaid, Feuerwehrhaus, Geräteraum, WB, ZGA 1230/0574/00716 — that corresponds to 6.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 02.06.2025, retrieved on 25/07/2026.
- How much nitrate is in the drinking water in Winkelhaid?
- ZV Wasserversorgung Gruppe Winkelhaid publishes a nitrate value of 4,9 mg/l for the supply zone Winkelhaid, Feuerwehrhaus, Geräteraum, WB, ZGA 1230/0574/00716. The statutory parametric value is 50 mg/l; the measured value represents 10 % of the parametric value. Basis: 02.06.2025, retrieved on 25/07/2026.
- Who supplies the drinking water in Winkelhaid?
- ZV Wasserversorgung Gruppe Winkelhaid. The values shown here come from the supply zone Winkelhaid, Feuerwehrhaus, Geräteraum, WB, ZGA 1230/0574/00716 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.