Skip to content
maunawai.info

Drinking water in Wilster

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

stadtwerke-wilster gesamt

Stadtwerke Wilster

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
9.2 °dH
Hardness range medium
Key values stadtwerke-wilster gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,2 mg/l 50 mg/l
2 %
Mean · Source [1]
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Source [1]
Escherichia coli (E. coli) 0 /100 ml 0/100 ml — Maximum · Median 0 · Source [1]
Sulphate 41 mg/l 250 mg/l
16 %
Mean · Source [1]
Sodium 14,3 mg/l 200 mg/l
7 %
Mean · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (53 — most recent value per parameter)

Microbiology (2)

Microbiology – stadtwerke-wilster gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 /100 ml 0/100 ml — Maximum · Median 0 · Source [1]
Intestinal enterococci 0 /100 ml 0/100 ml — Maximum · Median 0 · Source [1]

Chemical parameters (25)

Chemical parameters – stadtwerke-wilster gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Mean · Source [1]
Antimony <0,0001 mg/l
below limit of quantification
5 µg/l
< 2 % *
Mean · Source [1]
Arsenic <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Mean · Source [1]
Benzene <0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Mean · Source [1]
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
10 ng/l
< 30 % *
Mean · Source [1]
Bisphenol A <0,00005 mg/l
below limit of quantification
2.5 µg/l
< 2 % *
Mean · Source [2]
Boron <0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Mean · Source [1]
Bromate <0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Mean · Source [1]
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Mean · Source [1]
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Mean · Source [1]
Copper 0,022 mg/l 2 mg/l
1 %
Mean · Source [1]
Cyanide <0,004 mg/l
below limit of quantification
50 µg/l
< 8 % *
Mean · Source [1]
Fluoride 0,09 mg/l 1.5 mg/l
6 %
Mean · Source [1]
Haloacetic acids (HAA) 0 mg/l — — Mean · Source [2]
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Source [1]
Mercury <0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean · Source [1]
Nickel <0,001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Mean · Source [1]
Nitrate 1,2 mg/l 50 mg/l
2 %
Mean · Source [1]
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Source [1]
Pesticides — Total 0 mg/l 0.5 µg/l
0 %
Mean · Source [1]
Polycyclic aromatic hydrocarbons 0 mg/l 0.1 µg/l
0 %
Mean · Source [1]
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Source [1]
Tetrachloroethene and Trichloroethene (sum) 0 mg/l 10 µg/l
0 %
Mean · Source [1]
Trihalomethanes — Total 0 mg/l 50 µg/l
0 %
Mean · Source [1]
Uranium 0,0002 mg/l 10 µg/l
2 %
Mean · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (17)

Indicator parameters – stadtwerke-wilster gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean · Source [1]
Ammonium <0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Mean · Source [1]
Calcite dissolution capacity 6,0 mg/l 5 mg/l CaCO3 — Mean · Source [2]
Chloride 30 mg/l 250 mg/l
12 %
Mean · Source [1]
Coliform bacteria 0 /100 ml 0/100 ml — Maximum · Median 0 · Source [1]
Colony count 22 °C 0 /ml ohne anormale Veränderung — Mean · Source [1]
Colony count 36 °C 0 /ml ohne anormale Veränderung — Mean · Source [1]
Colour <0,1 1/m
below limit of quantification
0.5 m⁻¹ — Mean · Source [1]
Conductivity (25 °C) 390 µS/cm 2,790 µS/cm — Mean · Source [1]
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean · Source [1]
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean · Source [1]
pH 7,48 - 6,5–9,5 — Mean · Source [1]
Sodium 14,3 mg/l 200 mg/l
7 %
Mean · Source [1]
Sulphate 41 mg/l 250 mg/l
16 %
Mean · Source [1]
Temperature 12 °C — — Mean · Source [1]
Total organic carbon (TOC) 0,65 mg/l ohne anormale Veränderung — Mean · Source [1]
Turbidity 0,11 NTU 1 NTU — Mean · Source [1]

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – stadtwerke-wilster gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,18 mmol/l — — Mean · Source [1]
Base capacity to pH 8.2 0,15 mmol/l — — Mean · Source [1]
Calcium 58 mg/l — — Mean · Source [1]
Carbonate hardness 6,1 °dH — — Mean · Source [1]
Magnesium 4 mg/l — — Mean · Source [1]
Oxygen 9,3 mg/l — — Mean · Source [1]
Potassium 1,5 mg/l — — Mean · Source [1]
Total hardness 9,15 °dH — — Mean · Source [1]
Zinc <0,01 mg/l
below limit of quantification
— — Mean · Source [1]

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 25554

Show 1 more supply zone

WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang

Stadtwerke Wilster

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.2 °dH
Hardness range medium
Key values WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,72 mg/l 50 mg/l
3 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Single value
Sulphate 43,2 mg/l 250 mg/l
17 %
Single value
Sodium 14,7 mg/l 200 mg/l
7 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (52 — most recent value per parameter)

Microbiology (1)

Microbiology – WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Single value

Chemical parameters (20)

Chemical parameters – WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,5 µg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Antimony < 0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene < 0,5 µg/l
below limit of quantification
1 µg/l
< 50 % *
Single value
Benzo(a)pyrene < 0,01 µg/l
below limit of quantification
10 ng/l
< 100 % *
Single value
Bisphenol A < 0,05 µg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron 0,03 mg/l 1 mg/l
3 %
Single value
Bromate < 0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Copper < 0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Single value
Cyanide < 0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel < 0,001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 1,72 mg/l 50 mg/l
3 %
Single value
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Trihalomethanes — Total < 0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Uranium < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (1)

Metabolites – WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
Dimethylsulfamide (DMS) < 0,10 µg/l
below limit of quantification
— — Single value

Indicator parameters (18)

Indicator parameters – WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Calcite dissolution capacity 0,1 mg/l 5 mg/l CaCO3 — Single value
Chloride 29,5 mg/l 250 mg/l
12 %
Single value
Coliform bacteria 0 KBE/100 ml 0/100 ml — Single value
Colony count 22 °C 0 KBE/ml ohne anormale Veränderung — Single value
Colony count 36 °C 0 KBE/ml ohne anormale Veränderung — Single value
Colour farblos
Unit not stated in the document
0.5 m⁻¹ — Single value
Conductivity (25 °C) 406 µS/cm 2,790 µS/cm — Single value
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Odour o. B. für den Verbraucher annehmbar — Single value
Oxidisability 0,70 mg/l 5 mg/l O2 — Single value
pH 19,1 °C 6,5–9,5 — Single value
Sodium 14,7 mg/l 200 mg/l
7 %
Single value
Sulphate 43,2 mg/l 250 mg/l
17 %
Single value
Taste o. B. für den Verbraucher annehmbar — Single value
Temperature 10,3 °C — — Single value
Total organic carbon (TOC) 0,8 mg/l ohne anormale Veränderung — Single value
Turbidity 0,11 FNU 1 NTU — Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (12)

Further parameters – WW Kleve, Achtern Barg, 25554 Kleve / Pumpenkeller, Spülbecken, Wasserwerksausgang
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,21 mmol/l — — Single value
Base capacity to pH 8.2 0,05 mmol/l — — Single value
Calcium 58,0 mg/l — — Single value
Carbonate hardness 6,20 °dH — — Single value
Hydrogen carbonate 135 mg/l — — Single value
Magnesium 4,7 mg/l — — Single value
Oxygen 10,4 mg/l — — Single value
Phosphate < 0,1 mg/l
below limit of quantification
— — Single value
Potassium 1,7 mg/l — — Single value
Saturation index -0,01 — — Single value
Total hardness 9,20 °dH — — Single value
Zinc 0,003 mg/l — — Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://stadtwerke-wilster.de/wp-content/uploads/2026/06/Analyse-WW-Kleve-2025-11.pdf · 12.12.2025 · 04.11.2025 - 12.12.2025 · retrieved on 08/07/2026

Postcodes in this zone: 25554

Frequently asked questions about drinking water in Wilster

How hard is the water in Wilster?
Stadtwerke Wilster publishes a total hardness of 9.2 °dH for the supply zone stadtwerke-wilster gesamt (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/07/2026.
How much nitrate is in the drinking water in Wilster?
Stadtwerke Wilster publishes a nitrate value of 1,2 mg/l for the supply zone stadtwerke-wilster gesamt. The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/07/2026.
Who supplies the drinking water in Wilster?
Stadtwerke Wilster. The values shown here come from the supply zone stadtwerke-wilster gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.