Skip to content
maunawai.info

Drinking water in Wila

12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
20.4 °dH
Hardness range hard
Key values Au
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.05 mg/l 40 mg/l
23 %
Mean · Au
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au
Sulphate 5.75 mg/l Mean · Au
Sodium 6.15 mg/l 200 mg/l
3 %
Mean · Au
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Au
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Au
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Au

Chemical parameters (2)

Chemical parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Au
Nitrate 9.05 mg/l 40 mg/l
23 %
Mean · Au

Indicator parameters (4)

Indicator parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Chloride 10.25 mg/l Mean · Au
pH 7.2 Mean · Au
Sodium 6.15 mg/l 200 mg/l
3 %
Mean · Au
Sulphate 5.75 mg/l Mean · Au

Further parameters (4)

Further parameters – Au
Parameter Value Parametric value Share of the parametric value Reference
Calcium 98.05 mg/l Mean · Au
Magnesium 28.95 mg/l Mean · Au
Potassium 1.7 mg/l Mean · Au
Total hardness 36.4 °fH Mean · Au

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3406/au · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Show 11 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.4 °dH
Hardness range hard
Key values Büel
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.325 mg/l 40 mg/l
8 %
Mean · Büel
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Büel
Sulphate 2.05 mg/l Mean · Büel
Sodium 7.45 mg/l 200 mg/l
4 %
Mean · Büel
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Büel
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 102 KBE/ml 300 1/ml Mean · Büel
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Büel
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Büel

Chemical parameters (2)

Chemical parameters – Büel
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Büel
Nitrate 3.325 mg/l 40 mg/l
8 %
Mean · Büel

Indicator parameters (4)

Indicator parameters – Büel
Parameter Value Parametric value Share of the parametric value Reference
Chloride 11.1 mg/l Mean · Büel
pH 7.6 Mean · Büel
Sodium 7.45 mg/l 200 mg/l
4 %
Mean · Büel
Sulphate 2.05 mg/l Mean · Büel

Further parameters (4)

Further parameters – Büel
Parameter Value Parametric value Share of the parametric value Reference
Calcium 90.2 mg/l Mean · Büel
Magnesium 26.525 mg/l Mean · Büel
Potassium 0.875 mg/l Mean · Büel
Total hardness 34.675 °fH Mean · Büel

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1331/wasserversorgung-turbenthal/3397/buel · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Huben

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.5 °dH
Hardness range hard
Key values Huben
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.375 mg/l 40 mg/l
11 %
Mean · Huben
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben
Sulphate 2.75 mg/l Mean · Huben
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Huben
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Huben
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.25 KBE/ml 300 1/ml Mean · Huben
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Huben

Chemical parameters (2)

Chemical parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Huben
Nitrate 4.375 mg/l 40 mg/l
11 %
Mean · Huben

Indicator parameters (4)

Indicator parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.375 mg/l Mean · Huben
pH 7.75 Mean · Huben
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Huben
Sulphate 2.75 mg/l Mean · Huben

Further parameters (4)

Further parameters – Huben
Parameter Value Parametric value Share of the parametric value Reference
Calcium 74.7 mg/l Mean · Huben
Magnesium 17.65 mg/l Mean · Huben
Potassium 1.375 mg/l Mean · Huben
Total hardness 25.9 °fH Mean · Huben

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3404/huben · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hard
Key values Loch
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.35 mg/l 40 mg/l
11 %
Mean · Loch
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch
Sulphate 2.35 mg/l Mean · Loch
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Loch
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Loch
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 26.5 KBE/ml 300 1/ml Mean · Loch
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Loch

Chemical parameters (2)

Chemical parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Loch
Nitrate 4.35 mg/l 40 mg/l
11 %
Mean · Loch

Indicator parameters (4)

Indicator parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.35 mg/l Mean · Loch
pH 7.55 Mean · Loch
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Loch
Sulphate 2.35 mg/l Mean · Loch

Further parameters (4)

Further parameters – Loch
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72.95 mg/l Mean · Loch
Magnesium 17.7 mg/l Mean · Loch
Potassium 1.3 mg/l Mean · Loch
Total hardness 25.45 °fH Mean · Loch

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3408/loch · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Neubrunn/Seelmatten

Wasserversorgung Turbenthal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.4 °dH
Hardness range hard
Key values Neubrunn/Seelmatten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.65 mg/l 40 mg/l
14 %
Mean · Neubrunn/Seelmatten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neubrunn/Seelmatten
Sulphate 2.75 mg/l Mean · Neubrunn/Seelmatten
Sodium 4.45 mg/l 200 mg/l
2 %
Mean · Neubrunn/Seelmatten
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Neubrunn/Seelmatten
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0.5 KBE/ml 300 1/ml Mean · Neubrunn/Seelmatten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neubrunn/Seelmatten
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Neubrunn/Seelmatten

Chemical parameters (2)

Chemical parameters – Neubrunn/Seelmatten
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Neubrunn/Seelmatten
Nitrate 5.65 mg/l 40 mg/l
14 %
Mean · Neubrunn/Seelmatten

Indicator parameters (4)

Indicator parameters – Neubrunn/Seelmatten
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.1 mg/l Mean · Neubrunn/Seelmatten
pH 7.6 Mean · Neubrunn/Seelmatten
Sodium 4.45 mg/l 200 mg/l
2 %
Mean · Neubrunn/Seelmatten
Sulphate 2.75 mg/l Mean · Neubrunn/Seelmatten

Further parameters (4)

Further parameters – Neubrunn/Seelmatten
Parameter Value Parametric value Share of the parametric value Reference
Calcium 77.05 mg/l Mean · Neubrunn/Seelmatten
Magnesium 19.95 mg/l Mean · Neubrunn/Seelmatten
Potassium 1.2 mg/l Mean · Neubrunn/Seelmatten
Total hardness 27.45 °fH Mean · Neubrunn/Seelmatten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15 °dH
Hardness range hard
Key values Oberhofen/Ramsberg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.9 mg/l 40 mg/l
12 %
Mean · Oberhofen/Ramsberg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberhofen/Ramsberg
Sulphate 2.75 mg/l Mean · Oberhofen/Ramsberg
Sodium 5.55 mg/l 200 mg/l
3 %
Mean · Oberhofen/Ramsberg
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Oberhofen/Ramsberg
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 75.5 KBE/ml 300 1/ml Mean · Oberhofen/Ramsberg
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberhofen/Ramsberg
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Oberhofen/Ramsberg

Chemical parameters (2)

Chemical parameters – Oberhofen/Ramsberg
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Oberhofen/Ramsberg
Nitrate 4.9 mg/l 40 mg/l
12 %
Mean · Oberhofen/Ramsberg

Indicator parameters (4)

Indicator parameters – Oberhofen/Ramsberg
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.35 mg/l Mean · Oberhofen/Ramsberg
pH 7.65 Mean · Oberhofen/Ramsberg
Sodium 5.55 mg/l 200 mg/l
3 %
Mean · Oberhofen/Ramsberg
Sulphate 2.75 mg/l Mean · Oberhofen/Ramsberg

Further parameters (4)

Further parameters – Oberhofen/Ramsberg
Parameter Value Parametric value Share of the parametric value Reference
Calcium 76.35 mg/l Mean · Oberhofen/Ramsberg
Magnesium 18.55 mg/l Mean · Oberhofen/Ramsberg
Potassium 1.5 mg/l Mean · Oberhofen/Ramsberg
Total hardness 26.7 °fH Mean · Oberhofen/Ramsberg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hard
Key values Schmidrüti
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.4 mg/l 40 mg/l
11 %
Mean · Schmidrüti
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schmidrüti
Sulphate 2.3 mg/l Mean · Schmidrüti
Sodium 5 mg/l 200 mg/l
3 %
Mean · Schmidrüti
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Schmidrüti
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 65.5 KBE/ml 300 1/ml Mean · Schmidrüti
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schmidrüti
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Schmidrüti

Chemical parameters (2)

Chemical parameters – Schmidrüti
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Schmidrüti
Nitrate 4.4 mg/l 40 mg/l
11 %
Mean · Schmidrüti

Indicator parameters (4)

Indicator parameters – Schmidrüti
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.55 mg/l Mean · Schmidrüti
pH 7.7 Mean · Schmidrüti
Sodium 5 mg/l 200 mg/l
3 %
Mean · Schmidrüti
Sulphate 2.3 mg/l Mean · Schmidrüti

Further parameters (4)

Further parameters – Schmidrüti
Parameter Value Parametric value Share of the parametric value Reference
Calcium 73.25 mg/l Mean · Schmidrüti
Magnesium 17.7 mg/l Mean · Schmidrüti
Potassium 1.4 mg/l Mean · Schmidrüti
Total hardness 25.55 °fH Mean · Schmidrüti

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Steinenbachtal

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hard
Key values Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.266 mg/l 40 mg/l
11 %
Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Sulphate 2.266 mg/l Mean · Steinenbachtal
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 20.67 KBE/ml 300 1/ml Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal

Chemical parameters (2)

Chemical parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Steinenbachtal
Nitrate 4.266 mg/l 40 mg/l
11 %
Mean · Steinenbachtal

Indicator parameters (4)

Indicator parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.533 mg/l Mean · Steinenbachtal
pH 7.466 Mean · Steinenbachtal
Sodium 4.9 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Sulphate 2.266 mg/l Mean · Steinenbachtal

Further parameters (4)

Further parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 72.933 mg/l Mean · Steinenbachtal
Magnesium 17.833 mg/l Mean · Steinenbachtal
Potassium 1.333 mg/l Mean · Steinenbachtal
Total hardness 25.533 °fH Mean · Steinenbachtal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3405/steinenbachtal · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.5 °dH
Hardness range hard
Key values Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.2 mg/l 40 mg/l
11 %
Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Sulphate 2.25 mg/l Mean · Steinenbachtal
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Steinenbachtal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Steinenbachtal

Chemical parameters (2)

Chemical parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Steinenbachtal
Nitrate 4.2 mg/l 40 mg/l
11 %
Mean · Steinenbachtal

Indicator parameters (4)

Indicator parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Chloride 5.6 mg/l Mean · Steinenbachtal
pH 7.4 Mean · Steinenbachtal
Sodium 4.85 mg/l 200 mg/l
2 %
Mean · Steinenbachtal
Sulphate 2.25 mg/l Mean · Steinenbachtal

Further parameters (4)

Further parameters – Steinenbachtal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 73.35 mg/l Mean · Steinenbachtal
Magnesium 18.4 mg/l Mean · Steinenbachtal
Potassium 1.3 mg/l Mean · Steinenbachtal
Total hardness 25.9 °fH Mean · Steinenbachtal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
22.7 °dH
Hardness range hard
Key values Tablat
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 25.85 mg/l 40 mg/l
65 %
Mean · Tablat
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Tablat
Sulphate 21.35 mg/l Mean · Tablat
Sodium 7.55 mg/l 200 mg/l
4 %
Mean · Tablat
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Tablat
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 7.5 KBE/ml 300 1/ml Mean · Tablat
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Tablat
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Tablat

Chemical parameters (2)

Chemical parameters – Tablat
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Tablat
Nitrate 25.85 mg/l 40 mg/l
65 %
Mean · Tablat

Indicator parameters (4)

Indicator parameters – Tablat
Parameter Value Parametric value Share of the parametric value Reference
Chloride 9.85 mg/l Mean · Tablat
pH 7.3 Mean · Tablat
Sodium 7.55 mg/l 200 mg/l
4 %
Mean · Tablat
Sulphate 21.35 mg/l Mean · Tablat

Further parameters (4)

Further parameters – Tablat
Parameter Value Parametric value Share of the parametric value Reference
Calcium 115.3 mg/l Mean · Tablat
Magnesium 28.65 mg/l Mean · Tablat
Potassium 0.75 mg/l Mean · Tablat
Total hardness 40.55 °fH Mean · Tablat

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.8 °dH
Hardness range hard
Key values Turbenthal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.95 mg/l 40 mg/l
12 %
Mean · Turbenthal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Turbenthal
Sulphate 2.85 mg/l Mean · Turbenthal
Sodium 5.55 mg/l 200 mg/l
3 %
Mean · Turbenthal
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Turbenthal
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0.5 KBE/ml 300 1/ml Mean · Turbenthal
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Turbenthal
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Turbenthal

Chemical parameters (2)

Chemical parameters – Turbenthal
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Turbenthal
Nitrate 4.95 mg/l 40 mg/l
12 %
Mean · Turbenthal

Indicator parameters (4)

Indicator parameters – Turbenthal
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.2 mg/l Mean · Turbenthal
pH 7.65 Mean · Turbenthal
Sodium 5.55 mg/l 200 mg/l
3 %
Mean · Turbenthal
Sulphate 2.85 mg/l Mean · Turbenthal

Further parameters (4)

Further parameters – Turbenthal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 75.1 mg/l Mean · Turbenthal
Magnesium 18.75 mg/l Mean · Turbenthal
Potassium 1.5 mg/l Mean · Turbenthal
Total hardness 26.4 °fH Mean · Turbenthal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8492

Wila Dorf

WV Wila

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.3 °dH
Hardness range hard
Key values Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7.1 mg/l 40 mg/l
18 %
Mean · Wila Dorf
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf
Sulphate 3 mg/l Mean · Wila Dorf
Sodium 3.6 mg/l 200 mg/l
2 %
Mean · Wila Dorf
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.67 KBE/ml 300 1/ml Mean · Wila Dorf
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wila Dorf

Chemical parameters (2)

Chemical parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0 mg/l 1.5 mg/l
0 %
Mean · Wila Dorf
Nitrate 7.1 mg/l 40 mg/l
18 %
Mean · Wila Dorf

Indicator parameters (4)

Indicator parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Chloride 4.67 mg/l Mean · Wila Dorf
pH 7.4 Mean · Wila Dorf
Sodium 3.6 mg/l 200 mg/l
2 %
Mean · Wila Dorf
Sulphate 3 mg/l Mean · Wila Dorf

Further parameters (4)

Further parameters – Wila Dorf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82.1 mg/l Mean · Wila Dorf
Magnesium 20.8 mg/l Mean · Wila Dorf
Potassium 1 mg/l Mean · Wila Dorf
Total hardness 29.1 °fH Mean · Wila Dorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/858/wv-wila/3402/wila-dorf · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8492

Frequently asked questions about drinking water in Wila

How hard is the water in Wila?
WV Wila publishes a total hardness of 36.4 °fH for the supply zone Au — that corresponds to 20.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Wila?
WV Wila publishes a nitrate value of 9.05 mg/l for the supply zone Au. The statutory parametric value is 40 mg/l; the measured value represents 23 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Wila?
WV Wila. The values shown here come from the supply zone Au and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.