Skip to content
maunawai.info

Drinking water in Wil ZH

One supply zone, water supplier: Wasserversorgung Wil ZH.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wil ZH / Hüslihof / Buchenloo

Wasserversorgung Wil ZH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
15 °dH
Hardness range hard
Key values Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.3 mg/l 40 mg/l
23 %
Mean · Wil ZH / Hüslihof / Buchenloo
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wil ZH / Hüslihof / Buchenloo
Sulphate 14.7 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Sodium 4.7 mg/l 200 mg/l
2 %
Mean · Wil ZH / Hüslihof / Buchenloo
Show all recorded parameters (17 — most recent value per parameter)

Microbiology (3)

Microbiology – Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 21 KBE/ml 300 1/ml Mean · Wil ZH / Hüslihof / Buchenloo
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wil ZH / Hüslihof / Buchenloo
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Wil ZH / Hüslihof / Buchenloo

Chemical parameters (2)

Chemical parameters – Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Wil ZH / Hüslihof / Buchenloo
Nitrate 9.3 mg/l 40 mg/l
23 %
Mean · Wil ZH / Hüslihof / Buchenloo

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Mean · Wil ZH / Hüslihof / Buchenloo
Chlorothalonil metabolite R471811 0.121 µg/l 0.1 µg/l
121 % Mean above the parametric value
Mean · Wil ZH / Hüslihof / Buchenloo

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (6)

Indicator parameters – Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Chloride 4.3 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Conductivity (25 °C) 454 µS/cm Mean · Wil ZH / Hüslihof / Buchenloo
pH 7.35 Mean · Wil ZH / Hüslihof / Buchenloo
Sodium 4.7 mg/l 200 mg/l
2 %
Mean · Wil ZH / Hüslihof / Buchenloo
Sulphate 14.7 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Temperature 15.2 °C Mean · Wil ZH / Hüslihof / Buchenloo

Further parameters (4)

Further parameters – Wil ZH / Hüslihof / Buchenloo
Parameter Value Parametric value Share of the parametric value Reference
Calcium 84.3 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Magnesium 14 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Potassium 0.58 mg/l Mean · Wil ZH / Hüslihof / Buchenloo
Total hardness 26.8 °fH Mean · Wil ZH / Hüslihof / Buchenloo

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8196

Frequently asked questions about drinking water in Wil ZH

How hard is the water in Wil ZH?
Wasserversorgung Wil ZH publishes a total hardness of 26.8 °fH for the supply zone Wil ZH / Hüslihof / Buchenloo — that corresponds to 15 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Wil ZH?
Wasserversorgung Wil ZH publishes a nitrate value of 9.3 mg/l for the supply zone Wil ZH / Hüslihof / Buchenloo. The statutory parametric value is 40 mg/l; the measured value represents 23 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Wil ZH?
Wasserversorgung Wil ZH. The values shown here come from the supply zone Wil ZH / Hüslihof / Buchenloo and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.