Skip to content
maunawai.info

Drinking water in Wil AG

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
19.6 °dH
Hardness range hard
Key values Wil AG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 29 mg/l 40 mg/l
73 %
Mean · Wil AG
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Wil AG
Show all recorded parameters (5 — most recent value per parameter)

Microbiology (3)

Microbiology – Wil AG
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 10 KBE/ml 300 1/ml Mean · Wil AG
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Wil AG
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Wil AG

Chemical parameters (1)

Chemical parameters – Wil AG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 29 mg/l 40 mg/l
73 %
Mean · Wil AG

Further parameters (1)

Further parameters – Wil AG
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 35 °fH Mean · Wil AG

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5276

Show 2 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
25.2 °dH
Hardness range hard
Key values Etzgen - Mettau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Etzgen - Mettau
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Etzgen - Mettau
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Etzgen - Mettau
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Etzgen - Mettau
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Etzgen - Mettau
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Etzgen - Mettau

Chemical parameters (1)

Chemical parameters – Etzgen - Mettau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Etzgen - Mettau

Further parameters (3)

Further parameters – Etzgen - Mettau
Parameter Value Parametric value Share of the parametric value Reference
Calcium 126 mg/l Mean · Etzgen - Mettau
Magnesium 30.1 mg/l Mean · Etzgen - Mettau
Total hardness 45 °fH Mean · Etzgen - Mettau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5276

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.8 °dH
Hardness range hard
Key values Hottwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 13 mg/l 40 mg/l
33 %
Mean · Hottwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hottwil
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Hottwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 29.5 KBE/ml 300 1/ml Mean · Hottwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hottwil
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Hottwil

Chemical parameters (1)

Chemical parameters – Hottwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 13 mg/l 40 mg/l
33 %
Mean · Hottwil

Further parameters (3)

Further parameters – Hottwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 106.5 mg/l Mean · Hottwil
Magnesium 17.7 mg/l Mean · Hottwil
Total hardness 33.5 °fH Mean · Hottwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 5276

Frequently asked questions about drinking water in Wil AG

How hard is the water in Wil AG?
Wasserversorgung Mettauertal publishes a total hardness of 35 °fH for the supply zone Wil AG — that corresponds to 19.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2022, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Wil AG?
Wasserversorgung Mettauertal publishes a nitrate value of 29 mg/l for the supply zone Wil AG. The statutory parametric value is 40 mg/l; the measured value represents 73 % of the parametric value. Basis: 2022, retrieved on 07/08/2026.
Who supplies the drinking water in Wil AG?
Wasserversorgung Mettauertal. The values shown here come from the supply zone Wil AG and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.