Skip to content
maunawai.info

Drinking water in Weisenbach

One supply zone, water supplier: Gemeinde Weisenbach.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3,1
Hardness range WEICH
Key values Weisenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3,2 mg/l 50 mg/l
6 %
Single value
Lead <0,001
below limit of quantification
Unit not stated in the document
10 µg/l Single value
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Single value
Sodium 0,9
Unit not stated in the document
200 mg/l Single value
Show all recorded parameters (38 — most recent value per parameter)

Microbiology (2)

Microbiology – Weisenbach
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Single value
Intestinal enterococci 0
Unit not stated in the document
0/100 ml Single value

Chemical parameters (21)

Chemical parameters – Weisenbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic <0,001
below limit of quantification
Unit not stated in the document
10 µg/l Single value
Atrazine <0,000025 mg/l
below limit of quantification
Single value
Benzene <0,0005 mg/l
below limit of quantification
1 µg/l
< 50 % *
Single value
Boron <0,10 mg/l
below limit of quantification
1 mg/l
< 10 % *
Single value
Cadmium <0,0003
below limit of quantification
Unit not stated in the document
3 µg/l Single value
Copper <0,005
below limit of quantification
Unit not stated in the document
2 mg/l Single value
Fluoride <0,1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value
Hexazinone <0,000025 mg/l
below limit of quantification
Single value
Lead <0,001
below limit of quantification
Unit not stated in the document
10 µg/l Single value
Mercury <0,0001
below limit of quantification
Unit not stated in the document
1 µg/l Single value
Metalaxyl <0,000025 mg/l
below limit of quantification
Single value
Metolachlor <0,000025 mg/l
below limit of quantification
Single value
Nickel <0,002
below limit of quantification
Unit not stated in the document
20 µg/l Single value
Nitrate 3,2 mg/l 50 mg/l
6 %
Single value
Nitrite <0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine <0,000025 mg/l
below limit of quantification
Single value
Terbuthylazine <0,000025 mg/l
below limit of quantification
Single value
Tetrachloroethene <0,001
below limit of quantification
Single value
Trichloroethene <0,001
below limit of quantification
Single value
Uranium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Weisenbach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,03 mg/l 0.2 mg/l
15 %
Single value
Chloride 1,5 mg/l 250 mg/l
0.6 %
Single value
Coliform bacteria 0
Unit not stated in the document
0/100 ml Single value
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value
Iron <0,02
below limit of quantification
Unit not stated in the document
0.2 mg/l Single value
Manganese <0,005
below limit of quantification
Unit not stated in the document
50 µg/l Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 8,36 6,5–9,5 Single value
Sodium 0,9
Unit not stated in the document
200 mg/l Single value

Further parameters (6)

Further parameters – Weisenbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 22 mg/l Single value
Hardness range (WRMG) WEICH Single value
Magnesium 1,6 mg/l Single value
Oxygen 10,6 mg/l Single value
Potassium 1,8 mg/l Single value
Total hardness 3,1 Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weisenbach.de/,Lde/weisenbach_online/Leben+_+Wohnen/Wasserqualitaet.html · 26. Juni 2025 · 26. Juni 2025 · retrieved on 08/08/2026

Postcodes in this zone: 76599

Frequently asked questions about drinking water in Weisenbach

How hard is the water in Weisenbach?
Gemeinde Weisenbach publishes the hardness range WEICH for the supply zone Weisenbach. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 26. Juni 2025, retrieved on 08/08/2026.
How much nitrate is in the drinking water in Weisenbach?
Gemeinde Weisenbach publishes a nitrate value of 3,2 mg/l for the supply zone Weisenbach. The statutory parametric value is 50 mg/l; the measured value represents 6 % of the parametric value. Basis: 26. Juni 2025, retrieved on 08/08/2026.
Who supplies the drinking water in Weisenbach?
Gemeinde Weisenbach. The values shown here come from the supply zone Weisenbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.