Skip to content
maunawai.info

Drinking water in Walchwil

One supply zone, water supplier: Wasserversorgung Walchwil.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13.7 °dH
Hardness range medium
Key values Walchwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.75 mg/l 40 mg/l
14 %
Mean · Walchwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Walchwil
Show all recorded parameters (10 — most recent value per parameter)

Microbiology (3)

Microbiology – Walchwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria nn
not detectable
Unit not stated in the document
300 1/ml Mean · Walchwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Walchwil
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Walchwil

Chemical parameters (1)

Chemical parameters – Walchwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.75 mg/l 40 mg/l
14 %
Mean · Walchwil

PFAS (3)

PFAS – Walchwil
Parameter Value Parametric value Share of the parametric value Reference
Perfluorohexane sulfonic acid (PFHxS) 0 µg/l 0.3 µg/l
0 %
Mean · Walchwil
Perfluorooctanesulfonic acid (PFOS) 0 µg/l 0.3 µg/l
0 %
Mean · Walchwil
Perfluorooctanoic acid (PFOA) 0 µg/l 0.5 µg/l
0 %
Mean · Walchwil

Further parameters (3)

Further parameters – Walchwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 79.9 mg/l Mean · Walchwil
Magnesium 12.05 mg/l Mean · Walchwil
Total hardness 24.55 °fH Mean · Walchwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/820/wasserversorgung-walchwil/3633/walchwil · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 6318

Frequently asked questions about drinking water in Walchwil

How hard is the water in Walchwil?
Wasserversorgung Walchwil publishes a total hardness of 24.55 °fH for the supply zone Walchwil — that corresponds to 13.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Walchwil?
Wasserversorgung Walchwil publishes a nitrate value of 5.75 mg/l for the supply zone Walchwil. The statutory parametric value is 40 mg/l; the measured value represents 14 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Walchwil?
Wasserversorgung Walchwil. The values shown here come from the supply zone Walchwil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.