Skip to content
maunawai.info

Drinking water in Ulmen

5 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
7.6 °dH
Hardness range soft
Key values HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Sassen (WW),TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Sassen (WW),TW
Lead 0.4 µg/L 10 µg/l
4 %
Mean · HB Sassen (WW),TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Sassen (WW),TW
Sulphate 13 mg/L 250 mg/l
5 %
Mean · HB Sassen (WW),TW
Sodium 8.7 mg/L 200 mg/l
4 %
Mean · HB Sassen (WW),TW
Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Sassen (WW),TW

Chemical parameters (14)

Chemical parameters – HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.3 µg/L
below limit of quantification
5 µg/l
< 6 % *
Mean · HB Sassen (WW),TW
Arsenic < 0.6 µg/L
below limit of quantification
10 µg/l
< 6 % *
Mean · HB Sassen (WW),TW
Boron < 0.05 mg/L
below limit of quantification
1 mg/l
< 5 % *
Mean · HB Sassen (WW),TW
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · HB Sassen (WW),TW
Copper 0.006 mg/L 2 mg/l
0.3 %
Mean · HB Sassen (WW),TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Sassen (WW),TW
Fluoride 0.41 mg/L 1.5 mg/l
27 %
Mean · HB Sassen (WW),TW
Lead 0.4 µg/L 10 µg/l
4 %
Mean · HB Sassen (WW),TW
Mercury < 0.05 µg/L
below limit of quantification
1 µg/l
< 5 % *
Mean · HB Sassen (WW),TW
Nickel < 0.5 µg/L
below limit of quantification
20 µg/l
< 3 % *
Mean · HB Sassen (WW),TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Sassen (WW),TW
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · HB Sassen (WW),TW
Selenium < 0.6 µg/L
below limit of quantification
10 µg/l
< 6 % *
Mean · HB Sassen (WW),TW
Uranium 0.2 µg/L 10 µg/l
2 %
Mean · HB Sassen (WW),TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Sassen (WW),TW

Indicator parameters (10)

Indicator parameters – HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.01 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Mean · HB Sassen (WW),TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · HB Sassen (WW),TW
Chloride 10 mg/L 250 mg/l
4 %
Mean · HB Sassen (WW),TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Sassen (WW),TW
Iron < 0.005 mg/L
below limit of quantification
0.2 mg/l
< 3 % *
Mean · HB Sassen (WW),TW
Manganese < 0.002 mg/L
below limit of quantification
50 µg/l
< 4 % *
Mean · HB Sassen (WW),TW
pH 8.1 - 6,5–9,5 Mean · HB Sassen (WW),TW
Sodium 8.7 mg/L 200 mg/l
4 %
Mean · HB Sassen (WW),TW
Sulphate 13 mg/L 250 mg/l
5 %
Mean · HB Sassen (WW),TW
Temperature 10.9 °C Mean · HB Sassen (WW),TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Sassen (WW),TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 26.2 mg/L Mean · HB Sassen (WW),TW
Magnesium 20.3 mg/L Mean · HB Sassen (WW),TW
Potassium 4.8 mg/L Mean · HB Sassen (WW),TW
Total hardness 1.35 mmol/l Mean · HB Sassen (WW),TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2684695381/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 56766

Show 4 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
6.8 °dH
Hardness range soft
Key values HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.0091 µg/L 0.1 µg/l
9 %
Mean · HB Ulmen (WW), TW
Nitrate 3.1 mg/L 50 mg/l
6 %
Mean · HB Ulmen (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Ulmen (WW), TW
Sulphate 3.3 mg/L 250 mg/l
1 %
Mean · HB Ulmen (WW), TW
Sodium 35 mg/L 200 mg/l
18 %
Mean · HB Ulmen (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Ulmen (WW), TW

Chemical parameters (14)

Chemical parameters – HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Boron 0.02 mg/L 1 mg/l
2 %
Mean · HB Ulmen (WW), TW
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · HB Ulmen (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Fluoride 0.27 mg/L 1.5 mg/l
18 %
Mean · HB Ulmen (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Nitrate 3.1 mg/L 50 mg/l
6 %
Mean · HB Ulmen (WW), TW
Nitrite < 0.02 mg/L
below limit of quantification
0.5 mg/l
< 4 % *
Mean · HB Ulmen (WW), TW
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · HB Ulmen (WW), TW
Uranium 0.1 µg/L 10 µg/l
1 %
Mean · HB Ulmen (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.0091 µg/L 0.1 µg/l
9 %
Mean · HB Ulmen (WW), TW

Indicator parameters (10)

Indicator parameters – HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · HB Ulmen (WW), TW
Ammonium < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · HB Ulmen (WW), TW
Chloride 45.3 mg/L 250 mg/l
18 %
Mean · HB Ulmen (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Ulmen (WW), TW
Iron 0.025 mg/L 0.2 mg/l
13 %
Mean · HB Ulmen (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Ulmen (WW), TW
pH 7.92 - 6,5–9,5 Mean · HB Ulmen (WW), TW
Sodium 35 mg/L 200 mg/l
18 %
Mean · HB Ulmen (WW), TW
Sulphate 3.3 mg/L 250 mg/l
1 %
Mean · HB Ulmen (WW), TW
Temperature 9.1 °C Mean · HB Ulmen (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Ulmen (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 17.5 mg/L Mean · HB Ulmen (WW), TW
Magnesium 18.2 mg/L Mean · HB Ulmen (WW), TW
Potassium 12.8 mg/L Mean · HB Ulmen (WW), TW
Total hardness 1.22 mmol/l Mean · HB Ulmen (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2684695155/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 56766

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
17 °dH
Hardness range hard
Key values Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Höchstberg HB, Auslauf
Nitrate 8.4 mg/L 50 mg/l
17 %
Mean · Höchstberg HB, Auslauf
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Höchstberg HB, Auslauf
Sulphate 25 mg/L 250 mg/l
10 %
Mean · Höchstberg HB, Auslauf
Sodium 12.8 mg/L 200 mg/l
6 %
Mean · Höchstberg HB, Auslauf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Höchstberg HB, Auslauf

Chemical parameters (14)

Chemical parameters – Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Boron < 0.02 mg/L
below limit of quantification
1 mg/l
< 2 % *
Mean · Höchstberg HB, Auslauf
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · Höchstberg HB, Auslauf
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Fluoride 0.13 mg/L 1.5 mg/l
9 %
Mean · Höchstberg HB, Auslauf
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Nitrate 8.4 mg/L 50 mg/l
17 %
Mean · Höchstberg HB, Auslauf
Nitrite < 0.02 mg/L
below limit of quantification
0.5 mg/l
< 4 % *
Mean · Höchstberg HB, Auslauf
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · Höchstberg HB, Auslauf
Uranium 0.3 µg/L 10 µg/l
3 %
Mean · Höchstberg HB, Auslauf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Höchstberg HB, Auslauf

Indicator parameters (10)

Indicator parameters – Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
Ammonium 0.01 mg/L 0.5 mg/l
2 %
Mean · Höchstberg HB, Auslauf
Chloride 23.2 mg/L 250 mg/l
9 %
Mean · Höchstberg HB, Auslauf
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Höchstberg HB, Auslauf
Iron < 0.005 mg/L
below limit of quantification
0.2 mg/l
< 3 % *
Mean · Höchstberg HB, Auslauf
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Höchstberg HB, Auslauf
pH 7.87 - 6,5–9,5 Mean · Höchstberg HB, Auslauf
Sodium 12.8 mg/L 200 mg/l
6 %
Mean · Höchstberg HB, Auslauf
Sulphate 25 mg/L 250 mg/l
10 %
Mean · Höchstberg HB, Auslauf
Temperature 8.7 °C Mean · Höchstberg HB, Auslauf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Höchstberg HB, Auslauf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 76.2 mg/L Mean · Höchstberg HB, Auslauf
Magnesium 28.1 mg/L Mean · Höchstberg HB, Auslauf
Potassium 2.1 mg/L Mean · Höchstberg HB, Auslauf
Total hardness 3.03 mmol/l Mean · Höchstberg HB, Auslauf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2695695002/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 56766

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.7 °dH
Hardness range hard
Key values PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · PW Uersfeld (WW) ,TW
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Mean · PW Uersfeld (WW) ,TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · PW Uersfeld (WW) ,TW
Sulphate 13 mg/L 250 mg/l
5 %
Mean · PW Uersfeld (WW) ,TW
Sodium 12.6 mg/L 200 mg/l
6 %
Mean · PW Uersfeld (WW) ,TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · PW Uersfeld (WW) ,TW

Chemical parameters (14)

Chemical parameters – PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Boron < 0.02 mg/L
below limit of quantification
1 mg/l
< 2 % *
Mean · PW Uersfeld (WW) ,TW
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · PW Uersfeld (WW) ,TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Fluoride 0.2 mg/L 1.5 mg/l
13 %
Mean · PW Uersfeld (WW) ,TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Mean · PW Uersfeld (WW) ,TW
Nitrite < 0.02 mg/L
below limit of quantification
0.5 mg/l
< 4 % *
Mean · PW Uersfeld (WW) ,TW
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · PW Uersfeld (WW) ,TW
Uranium < 0.1 µg/L
below limit of quantification
10 µg/l
< 1 % *
Mean · PW Uersfeld (WW) ,TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · PW Uersfeld (WW) ,TW

Indicator parameters (10)

Indicator parameters – PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
Ammonium < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · PW Uersfeld (WW) ,TW
Chloride 22.9 mg/L 250 mg/l
9 %
Mean · PW Uersfeld (WW) ,TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · PW Uersfeld (WW) ,TW
Iron < 0.005 mg/L
below limit of quantification
0.2 mg/l
< 3 % *
Mean · PW Uersfeld (WW) ,TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · PW Uersfeld (WW) ,TW
pH 8.01 - 6,5–9,5 Mean · PW Uersfeld (WW) ,TW
Sodium 12.6 mg/L 200 mg/l
6 %
Mean · PW Uersfeld (WW) ,TW
Sulphate 13 mg/L 250 mg/l
5 %
Mean · PW Uersfeld (WW) ,TW
Temperature 9.4 °C Mean · PW Uersfeld (WW) ,TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – PW Uersfeld (WW) ,TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/L Mean · PW Uersfeld (WW) ,TW
Magnesium 41.3 mg/L Mean · PW Uersfeld (WW) ,TW
Potassium 2.3 mg/L Mean · PW Uersfeld (WW) ,TW
Total hardness 2.97 mmol/l Mean · PW Uersfeld (WW) ,TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2696698100/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 56766

Übergabeschacht Kölnische-Höfe (WW), TW

TWIST RLP - Übergabeschacht Kölnische-Höfe (WW), TW

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Übergabeschacht Kölnische-Höfe (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Übergabeschacht Kölnische-Höfe (WW), TW
Show all recorded parameters (4 — most recent value per parameter)

Microbiology (1)

Microbiology – Übergabeschacht Kölnische-Höfe (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Übergabeschacht Kölnische-Höfe (WW), TW

Indicator parameters (3)

Indicator parameters – Übergabeschacht Kölnische-Höfe (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Übergabeschacht Kölnische-Höfe (WW), TW
pH 7.98 - 6,5–9,5 Mean · Übergabeschacht Kölnische-Höfe (WW), TW
Temperature 11.5 °C Mean · Übergabeschacht Kölnische-Höfe (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2692695026/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 56766

Frequently asked questions about drinking water in Ulmen

How hard is the water in Ulmen?
TWIST RLP - HB Sassen (WW),TW publishes a total hardness of 1.35 mmol/l for the supply zone HB Sassen (WW),TW — that corresponds to 7.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Ulmen?
TWIST RLP - HB Sassen (WW),TW publishes a nitrate value of 5.9 mg/L for the supply zone HB Sassen (WW),TW. The statutory parametric value is 50 mg/l; the measured value represents 12 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Are PFAS detectable in the drinking water in Ulmen?
TWIST RLP - HB Sassen (WW),TW publishes for the supply zone HB Sassen (WW),TW a sum value PFAS-20 of 0 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Ulmen?
TWIST RLP - HB Sassen (WW),TW. The values shown here come from the supply zone HB Sassen (WW),TW and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.