Skip to content
maunawai.info

Drinking water in Tangerhütte u.a.

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
2.7 °dH
Hardness range weich
Key values Groß Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Sulphate 11 mg/l 250 mg/l
4 %
Mean
Sodium 7,2 mg/l 200 mg/l
4 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (38 — most recent value per parameter)

Microbiology (1)

Microbiology – Groß Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 in 100 ml 0/100 ml Mean

Chemical parameters (18)

Chemical parameters – Groß Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,00050 mg/l
below limit of quantification
3 µg/l
< 17 % *
Mean
Antimony <0,0010 mg/l
below limit of quantification
5 µg/l
< 20 % *
Mean
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Benzene <0,00030 mg/l
below limit of quantification
1 µg/l
< 30 % *
Mean
Benzo(a)pyrene <0,0000025 mg/l
below limit of quantification
10 ng/l
< 25 % *
Mean
Boron <0,100 mg/l
below limit of quantification
1 mg/l
< 10 % *
Mean
Cadmium <0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Mean
Chromium <0,000050 mg/l
below limit of quantification
25 µg/l
< 0.2 % *
Mean
Copper <0,0020 mg/l
below limit of quantification
2 mg/l
< 0.1 % *
Mean
Cyanide <0,010 mg/l
below limit of quantification
50 µg/l
< 20 % *
Mean
Fluoride <0,20 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury <0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Nickel <0,0020 mg/l
below limit of quantification
20 µg/l
< 10 % *
Mean
Nitrate <1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Mean
Nitrite <0,010 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Uranium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (13)

Indicator parameters – Groß Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,020 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Mean
Ammonium <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Chloride 6,5 mg/l 250 mg/l
3 %
Mean
Coliform bacteria 0 in 100 ml 0/100 ml Mean
Colony count 22 °C 0 n/ml ohne anormale Veränderung Mean
Colony count 36 °C 0 n/ml ohne anormale Veränderung Mean
Colour 0,17 m-1 0.5 m⁻¹ Mean
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Mean
Sodium 7,2 mg/l 200 mg/l
4 %
Mean
Sulphate 11 mg/l 250 mg/l
4 %
Mean
Total organic carbon (TOC) 0,79 mg/l ohne anormale Veränderung Mean
Turbidity 0,23 NTU 1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Groß Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 18,4 mg/l Mean
Hardness range (WRMG) weich - Mean
Magnesium 1,6 mg/l Mean
Potassium 0,8 mg/l Mean
Silicate / silicic acid 18,22 mg/l Mean
Total hardness 2,7 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://wvso.de/wp-content/uploads/2026/04/GrSchwarzlosen.pdf · April 2026 · 2025 · retrieved on 11/07/2026

Postcodes in this zone: 39517

Show 1 more supply zone

WVG WW Gr. Schwarzlosen

WVG WW Gr. Schwarzlosen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values WVG WW Gr. Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 7,894 mg/l 250 mg/l
3 %
Mean · WVG WW Gr. Schwarzlosen
Sodium 6,14 mg/l 200 mg/l
3 %
Mean · WVG WW Gr. Schwarzlosen
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – WVG WW Gr. Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Copper 0,13 mg/l 2 mg/l
7 %
Mean · WVG WW Gr. Schwarzlosen
Nickel 0,0021 mg/l 20 µg/l
10 %
Mean · WVG WW Gr. Schwarzlosen

Indicator parameters (6)

Indicator parameters – WVG WW Gr. Schwarzlosen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,0238 mg/l 0.2 mg/l
12 %
Mean · WVG WW Gr. Schwarzlosen
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Mean · WVG WW Gr. Schwarzlosen
Chloride 5,746 mg/l 250 mg/l
2 %
Mean · WVG WW Gr. Schwarzlosen
Iron 0,011 mg/l 0.2 mg/l
5 %
Mean · WVG WW Gr. Schwarzlosen
Sodium 6,14 mg/l 200 mg/l
3 %
Mean · WVG WW Gr. Schwarzlosen
Sulphate 7,894 mg/l 250 mg/l
3 %
Mean · WVG WW Gr. Schwarzlosen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://lavst.azurewebsites.net/wasserkarte/gemeinden/15083030b.pdf · Jahresmittel 2023 · Jahresmittel 2023 · retrieved on 18/08/2026

Postcodes in this zone: 39517

Frequently asked questions about drinking water in Tangerhütte u.a.

How hard is the water in Tangerhütte u.a.?
TWM Trinkwasserversorgung Magdeburg publishes a total hardness of 2.7 °dH for the supply zone Groß Schwarzlosen (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: April 2026, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Tangerhütte u.a.?
TWM Trinkwasserversorgung Magdeburg publishes a nitrate value of <1,0 mg/l for the supply zone Groß Schwarzlosen. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: April 2026, retrieved on 11/07/2026.
Who supplies the drinking water in Tangerhütte u.a.?
TWM Trinkwasserversorgung Magdeburg. The values shown here come from the supply zone Groß Schwarzlosen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.