Skip to content
maunawai.info

Drinking water in Stadtlauringen

10 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Hochbehälter III. Altenmünster

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
25.4 °dH
Hardness range 3
Key values Hochbehälter III. Altenmünster
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter III. Altenmünster
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter III. Altenmünster
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter III. Altenmünster
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter III. Altenmünster

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (20 — most recent value per parameter)

Chemical parameters (7)

Chemical parameters – Hochbehälter III. Altenmünster
Parameter Value Parametric value Share of the parametric value Reference
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Hochbehälter III. Altenmünster
Copper < 0,01 mg/l
below limit of quantification
2 mg/l
< 0.5 % *
Single value · Hochbehälter III. Altenmünster
Fluoride 0,39 mg/l 1.5 mg/l
26 %
Single value · Hochbehälter III. Altenmünster
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter III. Altenmünster
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Hochbehälter III. Altenmünster
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter III. Altenmünster
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Hochbehälter III. Altenmünster

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Hochbehälter III. Altenmünster
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Hochbehälter III. Altenmünster
Ammonium < 0,025 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value · Hochbehälter III. Altenmünster
Chloride 17,4 mg/l 250 mg/l
7 %
Single value · Hochbehälter III. Altenmünster
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Hochbehälter III. Altenmünster
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Hochbehälter III. Altenmünster
pH 7,38 pH 6,5–9,5 Single value · Hochbehälter III. Altenmünster
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter III. Altenmünster
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter III. Altenmünster

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Hochbehälter III. Altenmünster
Parameter Value Parametric value Share of the parametric value Reference
Calcium 116 mg/l Single value · Hochbehälter III. Altenmünster
Hardness range (WRMG) 3 Single value · Hochbehälter III. Altenmünster
Magnesium 39,9 mg/l Single value · Hochbehälter III. Altenmünster
Potassium 2,6 mg/l Single value · Hochbehälter III. Altenmünster
Total hardness 25,4 °dH Single value · Hochbehälter III. Altenmünster

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Show 9 more supply zones

Hochbehälter II. Reichm.hsn.

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
20.8 °dH
Hardness range 3
Key values Hochbehälter II. Reichm.hsn.
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,6 mg/l 50 mg/l
9 %
Single value · Hochbehälter II. Reichm.hsn.
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter II. Reichm.hsn.
Sulphate 45,5 mg/l 250 mg/l
18 %
Single value · Hochbehälter II. Reichm.hsn.
Sodium 3,2 mg/l 200 mg/l
2 %
Single value · Hochbehälter II. Reichm.hsn.

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (20 — most recent value per parameter)

Chemical parameters (7)

Chemical parameters – Hochbehälter II. Reichm.hsn.
Parameter Value Parametric value Share of the parametric value Reference
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Hochbehälter II. Reichm.hsn.
Copper 0,01 mg/l 2 mg/l
0.5 %
Single value · Hochbehälter II. Reichm.hsn.
Fluoride 0,14 mg/l 1.5 mg/l
9 %
Single value · Hochbehälter II. Reichm.hsn.
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter II. Reichm.hsn.
Nickel 0,002 mg/l 20 µg/l
10 %
Single value · Hochbehälter II. Reichm.hsn.
Nitrate 4,6 mg/l 50 mg/l
9 %
Single value · Hochbehälter II. Reichm.hsn.
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Hochbehälter II. Reichm.hsn.

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Hochbehälter II. Reichm.hsn.
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Hochbehälter II. Reichm.hsn.
Ammonium < 0,025 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value · Hochbehälter II. Reichm.hsn.
Chloride 8,1 mg/l 250 mg/l
3 %
Single value · Hochbehälter II. Reichm.hsn.
Iron 0,038 mg/l 0.2 mg/l
19 %
Single value · Hochbehälter II. Reichm.hsn.
Manganese 0,005 mg/l 50 µg/l
10 %
Single value · Hochbehälter II. Reichm.hsn.
pH 7,64 pH 6,5–9,5 Single value · Hochbehälter II. Reichm.hsn.
Sodium 3,2 mg/l 200 mg/l
2 %
Single value · Hochbehälter II. Reichm.hsn.
Sulphate 45,5 mg/l 250 mg/l
18 %
Single value · Hochbehälter II. Reichm.hsn.

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Hochbehälter II. Reichm.hsn.
Parameter Value Parametric value Share of the parametric value Reference
Calcium 96,3 mg/l Single value · Hochbehälter II. Reichm.hsn.
Hardness range (WRMG) 3 Single value · Hochbehälter II. Reichm.hsn.
Magnesium 28,6 mg/l Single value · Hochbehälter II. Reichm.hsn.
Potassium 1,5 mg/l Single value · Hochbehälter II. Reichm.hsn.
Total hardness 20,8 °dH Single value · Hochbehälter II. Reichm.hsn.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Hochbehälter I. Stadtlauringen

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
25.4 °dH
Hardness range 3
Key values Hochbehälter I. Stadtlauringen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter I. Stadtlauringen
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter I. Stadtlauringen
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter I. Stadtlauringen
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter I. Stadtlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (20 — most recent value per parameter)

Chemical parameters (7)

Chemical parameters – Hochbehälter I. Stadtlauringen
Parameter Value Parametric value Share of the parametric value Reference
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Hochbehälter I. Stadtlauringen
Copper < 0,01 mg/l
below limit of quantification
2 mg/l
< 0.5 % *
Single value · Hochbehälter I. Stadtlauringen
Fluoride 0,39 mg/l 1.5 mg/l
26 %
Single value · Hochbehälter I. Stadtlauringen
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter I. Stadtlauringen
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Hochbehälter I. Stadtlauringen
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter I. Stadtlauringen
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Hochbehälter I. Stadtlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Hochbehälter I. Stadtlauringen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Hochbehälter I. Stadtlauringen
Ammonium < 0,025 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value · Hochbehälter I. Stadtlauringen
Chloride 17,4 mg/l 250 mg/l
7 %
Single value · Hochbehälter I. Stadtlauringen
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Hochbehälter I. Stadtlauringen
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Hochbehälter I. Stadtlauringen
pH 7,38 pH 6,5–9,5 Single value · Hochbehälter I. Stadtlauringen
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter I. Stadtlauringen
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter I. Stadtlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Hochbehälter I. Stadtlauringen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 116 mg/l Single value · Hochbehälter I. Stadtlauringen
Hardness range (WRMG) 3 Single value · Hochbehälter I. Stadtlauringen
Magnesium 39,9 mg/l Single value · Hochbehälter I. Stadtlauringen
Potassium 2,6 mg/l Single value · Hochbehälter I. Stadtlauringen
Total hardness 25,4 °dH Single value · Hochbehälter I. Stadtlauringen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Hochbehälter IV. Oberlauringen

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
25.4 °dH
Hardness range 3
Key values Hochbehälter IV. Oberlauringen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter IV. Oberlauringen
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter IV. Oberlauringen
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter IV. Oberlauringen
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter IV. Oberlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (20 — most recent value per parameter)

Chemical parameters (7)

Chemical parameters – Hochbehälter IV. Oberlauringen
Parameter Value Parametric value Share of the parametric value Reference
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Hochbehälter IV. Oberlauringen
Copper < 0,01 mg/l
below limit of quantification
2 mg/l
< 0.5 % *
Single value · Hochbehälter IV. Oberlauringen
Fluoride 0,39 mg/l 1.5 mg/l
26 %
Single value · Hochbehälter IV. Oberlauringen
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Hochbehälter IV. Oberlauringen
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Hochbehälter IV. Oberlauringen
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Hochbehälter IV. Oberlauringen
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Hochbehälter IV. Oberlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Hochbehälter IV. Oberlauringen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Hochbehälter IV. Oberlauringen
Ammonium < 0,025 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value · Hochbehälter IV. Oberlauringen
Chloride 17,4 mg/l 250 mg/l
7 %
Single value · Hochbehälter IV. Oberlauringen
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Hochbehälter IV. Oberlauringen
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Hochbehälter IV. Oberlauringen
pH 7,38 pH 6,5–9,5 Single value · Hochbehälter IV. Oberlauringen
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Hochbehälter IV. Oberlauringen
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Hochbehälter IV. Oberlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Hochbehälter IV. Oberlauringen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 116 mg/l Single value · Hochbehälter IV. Oberlauringen
Hardness range (WRMG) 3 Single value · Hochbehälter IV. Oberlauringen
Magnesium 39,9 mg/l Single value · Hochbehälter IV. Oberlauringen
Potassium 2,6 mg/l Single value · Hochbehälter IV. Oberlauringen
Total hardness 25,4 °dH Single value · Hochbehälter IV. Oberlauringen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
25.4 °dH
Hardness range 3
Key values Leinach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Leinach
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Leinach
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Leinach
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Leinach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (21 — most recent value per parameter)

Chemical parameters (8)

Chemical parameters – Leinach
Parameter Value Parametric value Share of the parametric value Reference
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Leinach
Copper 0,002 mg/l 2 mg/l
0.1 %
Single value · Leinach
Fluoride 0,39 mg/l 1.5 mg/l
26 %
Single value · Leinach
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value · Leinach
Nickel 0,001 mg/l 20 µg/l
5 %
Single value · Leinach
Nitrate 7,7 mg/l 50 mg/l
15 %
Single value · Leinach
Nitrite < 0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Leinach
Uranium 0,001 mg/l 10 µg/l
10 %
Single value · Leinach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (8)

Indicator parameters – Leinach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Leinach
Ammonium < 0,025 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value · Leinach
Chloride 17,4 mg/l 250 mg/l
7 %
Single value · Leinach
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Leinach
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Leinach
pH 7,38 pH 6,5–9,5 Single value · Leinach
Sodium 17,3 mg/l 200 mg/l
9 %
Single value · Leinach
Sulphate 108 mg/l 250 mg/l
43 %
Single value · Leinach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Leinach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 116 mg/l Single value · Leinach
Hardness range (WRMG) 3 Single value · Leinach
Magnesium 39,9 mg/l Single value · Leinach
Potassium 2,6 mg/l Single value · Leinach
Total hardness 25,4 °dH Single value · Leinach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Verbandsgebiet Stadtlauringer Gruppe (Hochbehälter I-IV und Leinach)

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Verbandsgebiet Stadtlauringer Gruppe (Hochbehälter I-IV und Leinach)
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,0000016 mg/l 0.1 µg/l
2 %
Single value
Show all recorded parameters (2 — most recent value per parameter)

PFAS (2)

PFAS – Verbandsgebiet Stadtlauringer Gruppe (Hochbehälter I-IV und Leinach)
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,0000016 mg/l Single value
Sum of PFAS 0,0000016 mg/l 0.1 µg/l
2 %
Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

HB Altenmünster

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – HB Altenmünster
Parameter Value Parametric value Share of the parametric value Reference
Uranium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · HB Altenmünster

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

HB Oberlauringen

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – HB Oberlauringen
Parameter Value Parametric value Share of the parametric value Reference
Uranium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · HB Oberlauringen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

HB Reichm.hausen

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – HB Reichm.hausen
Parameter Value Parametric value Share of the parametric value Reference
Uranium 0,001 mg/l 10 µg/l
10 %
Single value · HB Reichm.hausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

HB Stadtlauringen

stadtlauringen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – HB Stadtlauringen
Parameter Value Parametric value Share of the parametric value Reference
Uranium 0,001 mg/l 10 µg/l
10 %
Single value · HB Stadtlauringen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 97488

Frequently asked questions about drinking water in Stadtlauringen

How hard is the water in Stadtlauringen?
stadtlauringen publishes a total hardness of 25.4 °dH for the supply zone Hochbehälter III. Altenmünster (hardness range 3). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/08/2026.
How much nitrate is in the drinking water in Stadtlauringen?
stadtlauringen publishes a nitrate value of 7,7 mg/l for the supply zone Hochbehälter III. Altenmünster. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/08/2026.
Who supplies the drinking water in Stadtlauringen?
stadtlauringen. The values shown here come from the supply zone Hochbehälter III. Altenmünster and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.