Skip to content
maunawai.info

Drinking water in St. Gallen

One supply zone, water supplier: St.Galler Stadtwerke.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Stadt St.Gallen

St.Galler Stadtwerke

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.1 °dH
Hardness range medium
Key values Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Stadt St.Gallen
Escherichia coli (E. coli) 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Stadt St.Gallen
Sulphate 33 mg/l Mean · Stadt St.Gallen
Sodium 6 mg/l 200 mg/l
3 %
Mean · Stadt St.Gallen

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Show all recorded parameters (24 — most recent value per parameter)

Microbiology (3)

Microbiology – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Stadt St.Gallen
Escherichia coli (E. coli) 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Stadt St.Gallen
Intestinal enterococci 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Stadt St.Gallen

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (1)

Chemical parameters – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Stadt St.Gallen

PFAS (4)

PFAS – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Perfluorohexane sulfonic acid (PFHxS) < 0.001 µg/l
below limit of quantification
0.3 µg/l
< 0.3 % *
Mean · Stadt St.Gallen
Perfluorohexanoic acid (PFHxA) 0.001 µg/l Mean · Stadt St.Gallen
Perfluorooctanesulfonic acid (PFOS) 0.003 µg/l 0.3 µg/l
1 %
Mean · Stadt St.Gallen
Perfluorooctanoic acid (PFOA) < 0.001 µg/l
below limit of quantification
0.5 µg/l
< 0.2 % *
Mean · Stadt St.Gallen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.001 µg/l
below limit of quantification
0.1 µg/l
< 1 % *
Mean · Stadt St.Gallen
Chlorothalonil metabolite R471811 0.029 µg/l 0.1 µg/l
29 %
Mean · Stadt St.Gallen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7 mg/l Mean · Stadt St.Gallen
Conductivity (25 °C) 305 µS/cm Mean · Stadt St.Gallen
Iron < 0.005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Mean · Stadt St.Gallen
Manganese < 0.0001 mg/l
below limit of quantification
50 µg/l
< 0.2 % *
Mean · Stadt St.Gallen
pH 8.02 Mean · Stadt St.Gallen
Sodium 6 mg/l 200 mg/l
3 %
Mean · Stadt St.Gallen
Sulphate 33 mg/l Mean · Stadt St.Gallen
Temperature 9.9 °C Mean · Stadt St.Gallen
Turbidity < 0.1 TE/F
below limit of quantification
Mean · Stadt St.Gallen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Stadt St.Gallen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/l Mean · Stadt St.Gallen
Dissolved organic carbon (DOC) 0.88 mg/l Mean · Stadt St.Gallen
Magnesium 8 mg/l Mean · Stadt St.Gallen
Potassium 1.5 mg/l Mean · Stadt St.Gallen
Total hardness 16.2 °fH Mean · Stadt St.Gallen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/668/stgaller-stadtwerke/3272/stadt-stgallen · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 9000

Frequently asked questions about drinking water in St. Gallen

How hard is the water in St. Gallen?
St.Galler Stadtwerke publishes a total hardness of 16.2 °fH for the supply zone Stadt St.Gallen — that corresponds to 9.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in St. Gallen?
St.Galler Stadtwerke publishes a nitrate value of 4 mg/l for the supply zone Stadt St.Gallen. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in St. Gallen?
St.Galler Stadtwerke. The values shown here come from the supply zone Stadt St.Gallen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.

No data yet

For 7 postcodes 9008, 9010, 9011, 9012, 9014, 9015, 9016 there is no verified assignment yet.