Drinking water in St. Aegyd am Neuwalde, Mariazell
One supply zone, water supplier: Gemeindewerke Rüti ZH.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
8630 Rüti ZH
Gemeindewerke Rüti ZHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 10.7 mg/l | 40 mg/l | 27 % | Mean · 8630 Rüti ZH |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · 8630 Rüti ZH |
| Sulphate | 8.8 mg/l | — | — | Mean · 8630 Rüti ZH |
| Sodium | 6.9 mg/l | 200 mg/l | 3 % | Mean · 8630 Rüti ZH |
Show all recorded parameters (15 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 44.3 KBE/ml | 300 1/ml | — | Mean · 8630 Rüti ZH |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · 8630 Rüti ZH |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · 8630 Rüti ZH |
Chemical parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Fluoride | 0.1 mg/l | 1.5 mg/l | 7 % | Mean · 8630 Rüti ZH |
| Nitrate | 10.7 mg/l | 40 mg/l | 27 % | Mean · 8630 Rüti ZH |
Indicator parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 9.7 mg/l | — | — | Mean · 8630 Rüti ZH |
| Conductivity (25 °C) | 487.7 µS/cm | — | — | Mean · 8630 Rüti ZH |
| pH | 7.4 | — | — | Mean · 8630 Rüti ZH |
| Sodium | 6.9 mg/l | 200 mg/l | 3 % | Mean · 8630 Rüti ZH |
| Sulphate | 8.8 mg/l | — | — | Mean · 8630 Rüti ZH |
| Temperature | 12.9 °C | — | — | Mean · 8630 Rüti ZH |
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 86.8 mg/l | — | — | Mean · 8630 Rüti ZH |
| Magnesium | 15.5 mg/l | — | — | Mean · 8630 Rüti ZH |
| Potassium | 1.4 mg/l | — | — | Mean · 8630 Rüti ZH |
| Total hardness | 28.1 °fH | — | — | Mean · 8630 Rüti ZH |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 8630
Frequently asked questions about drinking water in St. Aegyd am Neuwalde, Mariazell
- How hard is the water in St. Aegyd am Neuwalde, Mariazell?
- Gemeindewerke Rüti ZH publishes a total hardness of 28.1 °fH for the supply zone 8630 Rüti ZH — that corresponds to 15.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in St. Aegyd am Neuwalde, Mariazell?
- Gemeindewerke Rüti ZH publishes a nitrate value of 10.7 mg/l for the supply zone 8630 Rüti ZH. The statutory parametric value is 40 mg/l; the measured value represents 27 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in St. Aegyd am Neuwalde, Mariazell?
- Gemeindewerke Rüti ZH. The values shown here come from the supply zone 8630 Rüti ZH and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.