Skip to content
maunawai.info

Drinking water in Squillace, Stalettì

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren)

Wasserwerk Meckenbeuren

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.8 °dH
Hardness range hard
Key values Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17 mg/l 50 mg/l
34 %
Single value
Sulphate 14 mg/l 250 mg/l
6 %
Single value
Sodium 7,8 mg/l 200 mg/l
4 %
Single value
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17 mg/l 50 mg/l
34 %
Single value
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren)
Parameter Value Parametric value Share of the parametric value Reference
Chloride 9,7 mg/l 250 mg/l
4 %
Single value
Iron 0,036 mg/l 0.2 mg/l
18 %
Single value
Manganese < 0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
pH 7,21 6,5–9,5 Single value
Sodium 7,8 mg/l 200 mg/l
4 %
Single value
Sulphate 14 mg/l 250 mg/l
6 %
Single value
Temperature 15,1 ° C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 90,1 mg/l Single value
Hydrogen carbonate 351 mg/l Single value
Magnesium 18,2 mg/l Single value
Oxygen 8,7 mg/l Single value
Potassium 1,5 mg/l Single value
Total hardness 16,8 ° dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 88069

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values ON Tettnang
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (2)

Microbiology – ON Tettnang
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value

Indicator parameters (10)

Indicator parameters – ON Tettnang
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 MPN/100 ml 0/100 ml Single value
Colony count 22 °C 1 KBE/1 ml ohne anormale Veränderung Single value
Colony count 36 °C 1 KBE/1 ml ohne anormale Veränderung Single value
Colour ohne
Unit not stated in the document
0.5 m⁻¹ Single value
Conductivity (25 °C) 681 µS/cm 2,790 µS/cm Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,29 6,5–9,5 Single value
Taste n.u.
not determined
für den Verbraucher annehmbar Single value
Temperature 16,1 °C Single value
Turbidity < 0,1 FNU
below limit of quantification
1 NTU Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 88069

Frequently asked questions about drinking water in Squillace, Stalettì

How hard is the water in Squillace, Stalettì?
Wasserwerk Meckenbeuren publishes a total hardness of 16.8 °dH for the supply zone Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren) (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Squillace, Stalettì?
Wasserwerk Meckenbeuren publishes a nitrate value of 17 mg/l for the supply zone Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren). The statutory parametric value is 50 mg/l; the measured value represents 34 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Squillace, Stalettì?
Wasserwerk Meckenbeuren. The values shown here come from the supply zone Niederzone (Meckenbeuren, Brochenzell, Brugg, Habacht, Obermeckenbeuren) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.