Skip to content
maunawai.info

Drinking water in Speyer

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values speyer gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate <5 mg/l
below limit of quantification
250 mg/l
< 2 % *
Single value
Sodium 12,3 mg/l 200 mg/l
6 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (45 — most recent value per parameter)

Microbiology (1)

Microbiology – speyer gesamt
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 Anz./100ml 0/100 ml Single value

Chemical parameters (23)

Chemical parameters – speyer gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,3 µg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Antimony <1 µg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic 1 µg/l 10 µg/l
10 %
Single value
Benzene <0,25 µg/l
below limit of quantification
1 µg/l
< 25 % *
Single value
Benzo(a)pyrene <0,0025 µg/l
below limit of quantification
10 ng/l
< 25 % *
Single value
Bisphenol A <0,01 µg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron <0,1 mg/l
below limit of quantification
1 mg/l
< 10 % *
Single value
Cadmium <0,2 µg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Chromium <0,5 µg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,01 mg/l
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanide <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin <0,1 µg/l
below limit of quantification
0.1 µg/l
< 100 % *
Single value
Fluoride <0,1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value
Lead <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury <0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel <2 µg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate <1 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Selenium <1 µg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Tetrachloroethene <0,5 µg/l
below limit of quantification
Single value
Trichloroethene <0,5 µg/l
below limit of quantification
Single value
Trihalomethanes — Total <1 µg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Uranium <0,2 µg/l
below limit of quantification
10 µg/l
< 2 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – speyer gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Ammonium <0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Calcite dissolution capacity 0 mg/l 5 mg/l CaCO3 Single value
Chloride 6 mg/l 250 mg/l
2 %
Single value
Clostridium perfringens (including spores) 0 Anz./100ml 0/100 ml Single value
Colour 0,1 1/m 0.5 m⁻¹ Single value
Conductivity (25 °C) 523 µS/cm 2,790 µS/cm Single value
Iron <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
pH 7,16 6,5–9,5 Single value
Sodium 12,3 mg/l 200 mg/l
6 %
Single value
Sulphate <5 mg/l
below limit of quantification
250 mg/l
< 2 % *
Single value
Taste 0 für den Verbraucher annehmbar Single value
Threshold odour number (TON) 0 TON Single value
Total organic carbon (TOC) 1 mg/l ohne anormale Veränderung Single value
Turbidity <0,1 NTU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – speyer gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,52 mmol/l Single value
Calcium 82,9 mg/l Single value
Hydrogen carbonate 334 mg/l Single value
Magnesium 12,5 mg/l Single value
Potassium 2,4 mg/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-speyer.de/de/Energie-Wasser/Wasser/Trinkwasser/sws-2099-001-Trinkwasseranalyse-WEB-A.pdf · Stand 10/2025 · Werte gemessen am 13.10.2025 · retrieved on 11/07/2026

Postcodes in this zone: 67346

Show 2 more supply zones

ÜGS Speyer-Römerberg (WW), TW

TWIST RLP - ÜGS Speyer-Römerberg (WW), TW

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
15.6 °dH
Hardness range hard
Key values ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Nitrate 1.8 mg/L 50 mg/l
4 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · ÜGS Speyer-Römerberg (WW), TW
Sulphate < 5 mg/L
below limit of quantification
250 mg/l
< 2 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Sodium 13.7 mg/L 200 mg/l
7 %
Mean · ÜGS Speyer-Römerberg (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · ÜGS Speyer-Römerberg (WW), TW

Chemical parameters (14)

Chemical parameters – ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Arsenic 2 µg/L 10 µg/l
20 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Copper < 0.01 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Nitrate 1.8 mg/L 50 mg/l
4 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · ÜGS Speyer-Römerberg (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · ÜGS Speyer-Römerberg (WW), TW

Indicator parameters (10)

Indicator parameters – ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Chloride 10 mg/L 250 mg/l
4 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · ÜGS Speyer-Römerberg (WW), TW
Iron < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
pH 7.29 - 6,5–9,5 Mean · ÜGS Speyer-Römerberg (WW), TW
Sodium 13.7 mg/L 200 mg/l
7 %
Mean · ÜGS Speyer-Römerberg (WW), TW
Sulphate < 5 mg/L
below limit of quantification
250 mg/l
< 2 % *
Mean · ÜGS Speyer-Römerberg (WW), TW
Temperature 13.7 °C Mean · ÜGS Speyer-Römerberg (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – ÜGS Speyer-Römerberg (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 85.8 mg/L Mean · ÜGS Speyer-Römerberg (WW), TW
Magnesium 14.7 mg/L Mean · ÜGS Speyer-Römerberg (WW), TW
Potassium 2 mg/L Mean · ÜGS Speyer-Römerberg (WW), TW
Total hardness 2.78 mmol/l Mean · ÜGS Speyer-Römerberg (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2378695050/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 67346

Wasserwerk-Süd SP (WW), TW

TWIST RLP - Wasserwerk-Süd SP (WW), TW

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
14.5 °dH
Hardness range hard
Key values Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Wasserwerk-Süd SP (WW), TW
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Mean · Wasserwerk-Süd SP (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Wasserwerk-Süd SP (WW), TW
Sulphate < 5 mg/L
below limit of quantification
250 mg/l
< 2 % *
Mean · Wasserwerk-Süd SP (WW), TW
Sodium 11.5 mg/L 200 mg/l
6 %
Mean · Wasserwerk-Süd SP (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Wasserwerk-Süd SP (WW), TW

Chemical parameters (14)

Chemical parameters – Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · Wasserwerk-Süd SP (WW), TW
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · Wasserwerk-Süd SP (WW), TW
Copper < 0.01 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Mean · Wasserwerk-Süd SP (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Wasserwerk-Süd SP (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Mean · Wasserwerk-Süd SP (WW), TW
Nitrite 0.02 mg/L 0.5 mg/l
4 %
Mean · Wasserwerk-Süd SP (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · Wasserwerk-Süd SP (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Wasserwerk-Süd SP (WW), TW

Indicator parameters (10)

Indicator parameters – Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Chloride 4 mg/L 250 mg/l
2 %
Mean · Wasserwerk-Süd SP (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Wasserwerk-Süd SP (WW), TW
Iron < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Wasserwerk-Süd SP (WW), TW
pH 7.16 - 6,5–9,5 Mean · Wasserwerk-Süd SP (WW), TW
Sodium 11.5 mg/L 200 mg/l
6 %
Mean · Wasserwerk-Süd SP (WW), TW
Sulphate < 5 mg/L
below limit of quantification
250 mg/l
< 2 % *
Mean · Wasserwerk-Süd SP (WW), TW
Temperature 18.5 °C Mean · Wasserwerk-Süd SP (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Wasserwerk-Süd SP (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 76.7 mg/L Mean · Wasserwerk-Süd SP (WW), TW
Magnesium 10.8 mg/L Mean · Wasserwerk-Süd SP (WW), TW
Potassium 2.4 mg/L Mean · Wasserwerk-Süd SP (WW), TW
Total hardness 2.59 mmol/l Mean · Wasserwerk-Süd SP (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2379695061/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 67346

Frequently asked questions about drinking water in Speyer

How much nitrate is in the drinking water in Speyer?
Stadtwerke Speyer GmbH publishes a nitrate value of <1 mg/l for the supply zone speyer gesamt. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Stand 10/2025, retrieved on 11/07/2026.
Who supplies the drinking water in Speyer?
Stadtwerke Speyer GmbH. The values shown here come from the supply zone speyer gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.