Drinking water in Sonthofen
One supply zone, water supplier: Stadtwerke Sonthofen.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Stadt Sonthofen und die Ortsteile Rieden, Illersiedlung, Binswangen, Staig, Walten, Unterried, Tiefenbach, Imberg, Hofen, Margarethen, Beilenberg, Hinang u. Altstädten
Stadtwerke SonthofenAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | < 2,7 mg/l below limit of quantification | 50 mg/l | < 5 % * | Single value |
| Escherichia coli (E. coli) | 0 MPN/100 ml | 0/100 ml | — | Single value |
| Sulphate | 13,6 mg/l | 250 mg/l | 5 % | Single value |
| Sodium | 3,8 mg/l | 200 mg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (30 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 MPN/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Benzene | < 0,0003 mg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Boron | < 0,1 mg/l below limit of quantification | 1 mg/l | < 10 % * | Single value |
| Bromate | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Chromium | 0,0001 mg/l | 25 µg/l | 0.4 % | Single value |
| Fluoride | < 0,13 mg/l below limit of quantification | 1.5 mg/l | < 9 % * | Single value |
| Glyphosate | Unterhalb der Bestimmungsgrenze, somit nicht nachweisbar µg/l not detectable | — | — | Single value |
| Mercury | < 0,0002 mg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Nitrate | < 2,7 mg/l below limit of quantification | 50 mg/l | < 5 % * | Single value |
| Selenium | < 0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Tetrachloroethene and Trichloroethene (sum) | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | 0,0008 mg/l | 10 µg/l | 8 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (13)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | < 0,04 mg/l below limit of quantification | 0.5 mg/l | < 8 % * | Single value |
| Coliform bacteria | 0 MPN/100 ml | 0/100 ml | — | Single value |
| Conductivity (25 °C) | 395 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | < 0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Manganese | < 0,003 mg/l below limit of quantification | 50 µg/l | < 6 % * | Single value |
| Odour | ohne Auffälligkeit -- | für den Verbraucher annehmbar | — | Single value |
| pH | 7,84 (bei 8,3°C) -- | 6,5–9,5 | — | Single value |
| Sodium | 3,8 mg/l | 200 mg/l | 2 % | Single value |
| Sulphate | 13,6 mg/l | 250 mg/l | 5 % | Single value |
| Taste | ohne Auffälligkeit -- | für den Verbraucher annehmbar | — | Single value |
| Temperature | 8,3° C | — | — | Single value |
| Turbidity | <0,10 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 60,9 mg/l | — | — | Single value |
| Magnesium | 11,9 mg/l | — | — | Single value |
| Potassium | 0,6 mg/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 87527
Frequently asked questions about drinking water in Sonthofen
- How much nitrate is in the drinking water in Sonthofen?
- Stadtwerke Sonthofen publishes a nitrate value of < 2,7 mg/l for the supply zone Stadt Sonthofen und die Ortsteile Rieden, Illersiedlung, Binswangen, Staig, Walten, Unterried, Tiefenbach, Imberg, Hofen, Margarethen, Beilenberg, Hinang u. Altstädten. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Stand 09/2025, retrieved on 11/07/2026.
- Who supplies the drinking water in Sonthofen?
- Stadtwerke Sonthofen. The values shown here come from the supply zone Stadt Sonthofen und die Ortsteile Rieden, Illersiedlung, Binswangen, Staig, Walten, Unterried, Tiefenbach, Imberg, Hofen, Margarethen, Beilenberg, Hinang u. Altstädten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.