Skip to content
maunawai.info

Drinking water in Simmertal

9 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

Verbandsgemeindewerke Kirner Land

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.2 °dH
Hardness range hard
Key values Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 34 mg/l 50 mg/l
68 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0,004 mg/l 10 µg/l
40 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Chromium 0,001 mg/l 25 µg/l
4 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Fluoride 0,14 mg/l 1.5 mg/l
9 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Nickel < 0,005 mg/l
below limit of quantification
20 µg/l
< 25 % *
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Nitrate 34 mg/l 50 mg/l
68 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Nitrite 0,007 mg/l 0.5 mg/l
1 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Uranium 0,004 mg/l 10 µg/l
40 %
Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

Indicator parameters (1)

Indicator parameters – Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Parameter Value Parametric value Share of the parametric value Reference
pH 7,3 6,5–9,5 Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

Further parameters (3)

Further parameters – Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82 mg/l Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Magnesium 20,4 mg/l Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal
Total hardness 16,2 °dH Single value · Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Show 8 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8.3 °dH
Hardness range soft
Key values Brauweiler
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 30 mg/l 50 mg/l
60 %
Single value · Brauweiler
Lead 0,001 mg/l 10 µg/l
10 %
Single value · Brauweiler
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Brauweiler
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Brauweiler
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value · Brauweiler
Chromium < 0,002 mg/l
below limit of quantification
25 µg/l
< 8 % *
Single value · Brauweiler
Fluoride 0,08 mg/l 1.5 mg/l
5 %
Single value · Brauweiler
Lead 0,001 mg/l 10 µg/l
10 %
Single value · Brauweiler
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Brauweiler
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Brauweiler
Nitrate 30 mg/l 50 mg/l
60 %
Single value · Brauweiler
Nitrite < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value · Brauweiler
Uranium 0,0001 mg/l 10 µg/l
1 %
Single value · Brauweiler

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Brauweiler
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Brauweiler

Indicator parameters (1)

Indicator parameters – Brauweiler
Parameter Value Parametric value Share of the parametric value Reference
pH 7,82 6,5–9,5 Single value · Brauweiler

Further parameters (3)

Further parameters – Brauweiler
Parameter Value Parametric value Share of the parametric value Reference
Calcium 45 mg/l Single value · Brauweiler
Magnesium 8,7 mg/l Single value · Brauweiler
Total hardness 8,3 °dH Single value · Brauweiler

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Bruschied, Schneppenbach, Rudolfshaus

Verbandsgemeindewerke Kirner Land

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
6 °dH
Hardness range soft
Key values Bruschied, Schneppenbach, Rudolfshaus
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 11 mg/l 50 mg/l
22 %
Single value · Bruschied, Schneppenbach, Rudolfshaus
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Bruschied, Schneppenbach, Rudolfshaus
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Chromium < 0,001 mg/l
below limit of quantification
25 µg/l
< 4 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Fluoride 0,06 mg/l 1.5 mg/l
4 %
Single value · Bruschied, Schneppenbach, Rudolfshaus
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Nitrate 11 mg/l 50 mg/l
22 %
Single value · Bruschied, Schneppenbach, Rudolfshaus
Nitrite < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus
Uranium < 0,0001 mg/l
below limit of quantification
10 µg/l
< 1 % *
Single value · Bruschied, Schneppenbach, Rudolfshaus

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Bruschied, Schneppenbach, Rudolfshaus
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Bruschied, Schneppenbach, Rudolfshaus

Indicator parameters (1)

Indicator parameters – Bruschied, Schneppenbach, Rudolfshaus
Parameter Value Parametric value Share of the parametric value Reference
pH 7,99 6,5–9,5 Single value · Bruschied, Schneppenbach, Rudolfshaus

Further parameters (3)

Further parameters – Bruschied, Schneppenbach, Rudolfshaus
Parameter Value Parametric value Share of the parametric value Reference
Calcium 25 mg/l Single value · Bruschied, Schneppenbach, Rudolfshaus
Magnesium 10,9 mg/l Single value · Bruschied, Schneppenbach, Rudolfshaus
Total hardness 6 °dH Single value · Bruschied, Schneppenbach, Rudolfshaus

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.7 °dH
Hardness range soft
Key values HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0.002 µg/L
below limit of quantification
0.1 µg/l
< 2 % *
Mean · HB Weitersborn (WW), TW
Nitrate 3 mg/L 50 mg/l
6 %
Mean · HB Weitersborn (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Weitersborn (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Weitersborn (WW), TW
Sulphate 12 mg/L 250 mg/l
5 %
Mean · HB Weitersborn (WW), TW
Sodium 9.1 mg/L 200 mg/l
5 %
Mean · HB Weitersborn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Weitersborn (WW), TW

Chemical parameters (14)

Chemical parameters – HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · HB Weitersborn (WW), TW
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Weitersborn (WW), TW
Boron 0.01 mg/L 1 mg/l
1 %
Mean · HB Weitersborn (WW), TW
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · HB Weitersborn (WW), TW
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · HB Weitersborn (WW), TW
Cyanide < 0.003 mg/L
below limit of quantification
50 µg/l
< 6 % *
Mean · HB Weitersborn (WW), TW
Fluoride < 0.05 mg/L
below limit of quantification
1.5 mg/l
< 3 % *
Mean · HB Weitersborn (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Weitersborn (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · HB Weitersborn (WW), TW
Nickel < 5 µg/L
below limit of quantification
20 µg/l
< 25 % *
Mean · HB Weitersborn (WW), TW
Nitrate 3 mg/L 50 mg/l
6 %
Mean · HB Weitersborn (WW), TW
Nitrite < 0.005 mg/L
below limit of quantification
0.5 mg/l
< 1 % *
Mean · HB Weitersborn (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Weitersborn (WW), TW
Uranium < 0.1 µg/L
below limit of quantification
10 µg/l
< 1 % *
Mean · HB Weitersborn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0.002 µg/L
below limit of quantification
0.1 µg/l
< 2 % *
Mean · HB Weitersborn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.012 mg/L 0.2 mg/l
6 %
Mean · HB Weitersborn (WW), TW
Ammonium 0.2 mg/L 0.5 mg/l
40 %
Mean · HB Weitersborn (WW), TW
Chloride 12 mg/L 250 mg/l
5 %
Mean · HB Weitersborn (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Weitersborn (WW), TW
Iron < 0.05 mg/L
below limit of quantification
0.2 mg/l
< 25 % *
Mean · HB Weitersborn (WW), TW
Manganese < 0.01 mg/L
below limit of quantification
50 µg/l
< 20 % *
Mean · HB Weitersborn (WW), TW
pH 8.21 - 6,5–9,5 Mean · HB Weitersborn (WW), TW
Sodium 9.1 mg/L 200 mg/l
5 %
Mean · HB Weitersborn (WW), TW
Sulphate 12 mg/L 250 mg/l
5 %
Mean · HB Weitersborn (WW), TW
Temperature 11.6 °C Mean · HB Weitersborn (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Weitersborn (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 23 mg/L Mean · HB Weitersborn (WW), TW
Magnesium 6.6 mg/L Mean · HB Weitersborn (WW), TW
Potassium 1.5 mg/L Mean · HB Weitersborn (WW), TW
Total hardness 0.84 mmol/l Mean · HB Weitersborn (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2544695360/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 55618

Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

Verbandsgemeindewerke Kirner Land

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.3 °dH
Hardness range soft
Key values Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 50 mg/l
8 %
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0,004 mg/l 10 µg/l
40 %
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Chromium < 0,002 mg/l
below limit of quantification
25 µg/l
< 8 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Fluoride 0,09 mg/l 1.5 mg/l
6 %
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Nitrate 4 mg/l 50 mg/l
8 %
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Nitrite < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Uranium 0,0001 mg/l 10 µg/l
1 %
Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

Indicator parameters (1)

Indicator parameters – Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Parameter Value Parametric value Share of the parametric value Reference
pH 8,08 6,5–9,5 Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

Further parameters (3)

Further parameters – Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Parameter Value Parametric value Share of the parametric value Reference
Calcium 21 mg/l Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Magnesium 5,8 mg/l Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau
Total hardness 4,3 °dH Single value · Horbach, Kellenbach, Königsau, Schwarzerden, Weitersborn, Henau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.7 °dH
Hardness range hard
Key values Limbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 40 mg/l 50 mg/l
80 %
Single value · Limbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Limbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Limbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0,003 mg/l 10 µg/l
30 %
Single value · Limbach
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value · Limbach
Chromium < 0,002 mg/l
below limit of quantification
25 µg/l
< 8 % *
Single value · Limbach
Fluoride 0,09 mg/l 1.5 mg/l
6 %
Single value · Limbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Limbach
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Limbach
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Limbach
Nitrate 40 mg/l 50 mg/l
80 %
Single value · Limbach
Nitrite 0,005 mg/l 0.5 mg/l
1 %
Single value · Limbach
Uranium 0,0051 mg/l 10 µg/l
51 %
Single value · Limbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Limbach
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Limbach

Indicator parameters (1)

Indicator parameters – Limbach
Parameter Value Parametric value Share of the parametric value Reference
pH 7,01 6,5–9,5 Single value · Limbach

Further parameters (3)

Further parameters – Limbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 84 mg/l Single value · Limbach
Magnesium 17,3 mg/l Single value · Limbach
Total hardness 15,7 °dH Single value · Limbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.4 °dH
Hardness range hard
Key values Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.01 µg/L 0.1 µg/l
10 %
Mean · Limbach-Großbachtal
Nitrate 34 mg/L 50 mg/l
68 %
Mean · Limbach-Großbachtal
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Limbach-Großbachtal
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Limbach-Großbachtal
Sulphate 29 mg/L 250 mg/l
12 %
Mean · Limbach-Großbachtal
Sodium 14.1 mg/L 200 mg/l
7 %
Mean · Limbach-Großbachtal

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Limbach-Großbachtal

Chemical parameters (14)

Chemical parameters – Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · Limbach-Großbachtal
Arsenic 4 µg/L 10 µg/l
40 %
Mean · Limbach-Großbachtal
Boron 0.03 mg/L 1 mg/l
3 %
Mean · Limbach-Großbachtal
Cadmium < 0.2 µg/L
below limit of quantification
3 µg/l
< 7 % *
Mean · Limbach-Großbachtal
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · Limbach-Großbachtal
Cyanide < 0.003 mg/L
below limit of quantification
50 µg/l
< 6 % *
Mean · Limbach-Großbachtal
Fluoride 0.14 mg/L 1.5 mg/l
9 %
Mean · Limbach-Großbachtal
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Limbach-Großbachtal
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Limbach-Großbachtal
Nickel < 5 µg/L
below limit of quantification
20 µg/l
< 25 % *
Mean · Limbach-Großbachtal
Nitrate 34 mg/L 50 mg/l
68 %
Mean · Limbach-Großbachtal
Nitrite 0.008 mg/L 0.5 mg/l
2 %
Mean · Limbach-Großbachtal
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Limbach-Großbachtal
Uranium 4 µg/L 10 µg/l
40 %
Mean · Limbach-Großbachtal

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0.01 µg/L 0.1 µg/l
10 %
Mean · Limbach-Großbachtal

Indicator parameters (10)

Indicator parameters – Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.005 mg/L
below limit of quantification
0.2 mg/l
< 3 % *
Mean · Limbach-Großbachtal
Ammonium 0.04 mg/L 0.5 mg/l
8 %
Mean · Limbach-Großbachtal
Chloride 27 mg/L 250 mg/l
11 %
Mean · Limbach-Großbachtal
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Limbach-Großbachtal
Iron < 0.05 mg/L
below limit of quantification
0.2 mg/l
< 25 % *
Mean · Limbach-Großbachtal
Manganese < 0.01 mg/L
below limit of quantification
50 µg/l
< 20 % *
Mean · Limbach-Großbachtal
pH 7.68 - 6,5–9,5 Mean · Limbach-Großbachtal
Sodium 14.1 mg/L 200 mg/l
7 %
Mean · Limbach-Großbachtal
Sulphate 29 mg/L 250 mg/l
12 %
Mean · Limbach-Großbachtal
Temperature 9.5 °C Mean · Limbach-Großbachtal

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Limbach-Großbachtal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82 mg/L Mean · Limbach-Großbachtal
Magnesium 20.4 mg/L Mean · Limbach-Großbachtal
Potassium 2.8 mg/L Mean · Limbach-Großbachtal
Total hardness 2.93 mmol/l Mean · Limbach-Großbachtal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2541699500/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 55618

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13 °dH
Hardness range medium
Key values Meckenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 24 mg/l 50 mg/l
48 %
Single value · Meckenbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Meckenbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Meckenbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0,004 mg/l 10 µg/l
40 %
Single value · Meckenbach
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value · Meckenbach
Chromium 0,0012 mg/l 25 µg/l
5 %
Single value · Meckenbach
Fluoride 0,18 mg/l 1.5 mg/l
12 %
Single value · Meckenbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Meckenbach
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Meckenbach
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Meckenbach
Nitrate 24 mg/l 50 mg/l
48 %
Single value · Meckenbach
Nitrite < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value · Meckenbach
Uranium 0,0034 mg/l 10 µg/l
34 %
Single value · Meckenbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Meckenbach
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,002 µg/l Single value · Meckenbach

Indicator parameters (1)

Indicator parameters – Meckenbach
Parameter Value Parametric value Share of the parametric value Reference
pH 7,09 6,5–9,5 Single value · Meckenbach

Further parameters (3)

Further parameters – Meckenbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 57 mg/l Single value · Meckenbach
Magnesium 21,7 mg/l Single value · Meckenbach
Total hardness 13 °dH Single value · Meckenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Otzweiler, Welschrötherhof

Verbandsgemeindewerke Kirner Land

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.6 °dH
Hardness range soft
Key values Otzweiler, Welschrötherhof
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6 mg/l 50 mg/l
12 %
Single value · Otzweiler, Welschrötherhof
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Otzweiler, Welschrötherhof

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (10)

Chemical parameters – Otzweiler, Welschrötherhof
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0,003 mg/l 10 µg/l
30 %
Single value · Otzweiler, Welschrötherhof
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value · Otzweiler, Welschrötherhof
Chromium 0,0014 mg/l 25 µg/l
6 %
Single value · Otzweiler, Welschrötherhof
Fluoride 0,18 mg/l 1.5 mg/l
12 %
Single value · Otzweiler, Welschrötherhof
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Otzweiler, Welschrötherhof
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Otzweiler, Welschrötherhof
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Otzweiler, Welschrötherhof
Nitrate 6 mg/l 50 mg/l
12 %
Single value · Otzweiler, Welschrötherhof
Nitrite <0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value · Otzweiler, Welschrötherhof
Uranium < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Otzweiler, Welschrötherhof

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Otzweiler, Welschrötherhof
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS n.n. µg/l
not detectable
Single value · Otzweiler, Welschrötherhof

Indicator parameters (1)

Indicator parameters – Otzweiler, Welschrötherhof
Parameter Value Parametric value Share of the parametric value Reference
pH 7,5 6,5–9,5 Single value · Otzweiler, Welschrötherhof

Further parameters (3)

Further parameters – Otzweiler, Welschrötherhof
Parameter Value Parametric value Share of the parametric value Reference
Calcium 24 mg/l Single value · Otzweiler, Welschrötherhof
Magnesium 2,3 mg/l Single value · Otzweiler, Welschrötherhof
Total hardness 4,6 °dH Single value · Otzweiler, Welschrötherhof

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55618

Frequently asked questions about drinking water in Simmertal

How hard is the water in Simmertal?
Verbandsgemeindewerke Kirner Land publishes a total hardness of 16.2 °dH for the supply zone Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 31.03.2026, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Simmertal?
Verbandsgemeindewerke Kirner Land publishes a nitrate value of 34 mg/l for the supply zone Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal. The statutory parametric value is 50 mg/l; the measured value represents 68 % of the parametric value. Basis: 31.03.2026, retrieved on 11/07/2026.
Who supplies the drinking water in Simmertal?
Verbandsgemeindewerke Kirner Land. The values shown here come from the supply zone Bärenbach, Becherbach, Hahnenbach, Heinzenberg, Heimweiler, Hennweiler, Hochstetten-Dhaun, Kirn, Martinstein, Oberhausen, Simmertal and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.