Skip to content
maunawai.info

Drinking water in Schwyz

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
7.3 °dH
Hardness range soft
Key values Loo-Obdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.8 mg/l 40 mg/l
14 %
Mean · Loo-Obdorf
Escherichia coli (E. coli) 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Loo-Obdorf
Sulphate 10.4 mg/l Mean · Loo-Obdorf
Sodium 0.015 mg/l 200 mg/l
< 0.1 %
Mean · Loo-Obdorf

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Show all recorded parameters (16 — most recent value per parameter)

Microbiology (3)

Microbiology – Loo-Obdorf
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 7 KBE/ml 300 1/ml Mean · Loo-Obdorf
Escherichia coli (E. coli) 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Loo-Obdorf
Intestinal enterococci 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Loo-Obdorf

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (1)

Chemical parameters – Loo-Obdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5.8 mg/l 40 mg/l
14 %
Mean · Loo-Obdorf

Indicator parameters (7)

Indicator parameters – Loo-Obdorf
Parameter Value Parametric value Share of the parametric value Reference
Chloride 1 mg/l Mean · Loo-Obdorf
Conductivity (25 °C) 258 µS/cm Mean · Loo-Obdorf
pH 2.35 Mean · Loo-Obdorf
Sodium 0.015 mg/l 200 mg/l
< 0.1 %
Mean · Loo-Obdorf
Sulphate 10.4 mg/l Mean · Loo-Obdorf
Temperature 7.6 °C Mean · Loo-Obdorf
Turbidity 0.35 TE/F Mean · Loo-Obdorf

Further parameters (5)

Further parameters – Loo-Obdorf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 48 mg/l Mean · Loo-Obdorf
Hydrogen carbonate 13.2 mg/l Mean · Loo-Obdorf
Magnesium 3 mg/l Mean · Loo-Obdorf
Spectral absorption coefficient 254 nm (SAC 254) 3.2 1/m Mean · Loo-Obdorf
Total hardness 13.1 °fH Mean · Loo-Obdorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6430

Show 1 more supply zone

Schwyz, Seewen, Ibach, Rickenbach

Dorfgenossenschaft Schwyz

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.1 °dH
Hardness range medium
Key values Schwyz, Seewen, Ibach, Rickenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.6 mg/l 40 mg/l
12 %
Mean · Schwyz, Seewen, Ibach, Rickenbach
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Schwyz, Seewen, Ibach, Rickenbach
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Schwyz, Seewen, Ibach, Rickenbach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 9 KBE/ml 300 1/ml Mean · Schwyz, Seewen, Ibach, Rickenbach
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Schwyz, Seewen, Ibach, Rickenbach
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Schwyz, Seewen, Ibach, Rickenbach

Chemical parameters (1)

Chemical parameters – Schwyz, Seewen, Ibach, Rickenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.6 mg/l 40 mg/l
12 %
Mean · Schwyz, Seewen, Ibach, Rickenbach

Further parameters (3)

Further parameters – Schwyz, Seewen, Ibach, Rickenbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 77.3 mg/l Mean · Schwyz, Seewen, Ibach, Rickenbach
Magnesium 5.6 mg/l Mean · Schwyz, Seewen, Ibach, Rickenbach
Total hardness 21.6 °fH Mean · Schwyz, Seewen, Ibach, Rickenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6430

Frequently asked questions about drinking water in Schwyz

How hard is the water in Schwyz?
Wasserversorgungsgenossenschaft Loo-Obdorf publishes a total hardness of 13.1 °fH for the supply zone Loo-Obdorf — that corresponds to 7.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Schwyz?
Wasserversorgungsgenossenschaft Loo-Obdorf publishes a nitrate value of 5.8 mg/l for the supply zone Loo-Obdorf. The statutory parametric value is 40 mg/l; the measured value represents 14 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Schwyz?
Wasserversorgungsgenossenschaft Loo-Obdorf. The values shown here come from the supply zone Loo-Obdorf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.